This ARCHITECT/ENGINEER (ACCELERATED HIRE) is located in the Civil Engineering Squadron at an Air National Guard Wingand is part of the California Air Force National Guard.
This position is an interdisciplinary position. The title of Architect, General Engineer, Civil Engineer, Mechanical Engineer, Electrical Engineer and occupational series is assigned depending on the qualifications of the incumbent selected to fill the position.
Applicants will be accepted from any U. S. Citizen, Federal re-employable eligibles and All current (nationwide) federal employees. Direct Hire Authority will be used to fill this position. The 'Rule of Three', Veterans Preference and traditional rating and ranking of applicants does not apply to this vacancy.
THIS IS A T5 EXCEPTED SERVICE, PERMANENT POSITION
The primary purpose of the ARCHITECT/ENGINEER (ACCELERATED HIRE), GS-0810-12, is to provide supervisory (less than 25%) and technical assistance to the Base Architect/Engineer in overseeing and managing the engineering shops and production control function, provide technical support to all assigned sections and provide guidance to these sections on standard and code requirements.
The position resides within the infrastructure and support functions of the state National Guard; the incumbent is not subject to mobilization, nor is the work described part of the military mission; and the incumbent does not perform a key advisory or essential administrative role that is inherently military. In addition, the position must meet one of the following: It does not have a comparable military function; the position is required in full-time (civilian) role when the organization, or similar military position, is mobilized to perform continuing post-mobilization functions; or the position requires a skill or competency that necessitates technical expertise or professional qualifications that cannot be readily found in the military structure of the state military force.
This is an open until filled announcement. The announcement will be posted until all positions have been filled. Applications will be reviewed every 30 days and you will receive an email regarding your application status when reviewed.
May make additional selections within 90 days of eligible(s) issuance.
Recruitment/Relocation
Recruitment/Relocation Incentive MAY BE authorized, subject to funding and approval.
PCS
Relocation Costs MAY BE authorized subject to provisions of the Joint Travel Regulation, funding, and an agency determination that a Permanent Change of Station (PCS) move is in the Government's best interest.
ARCHITECT/ENGINEER (ACCELERATED HIRE), GS-0810-12: Must have at least one year of specialized experience, equivalent to at least the GS-11 level, or equivalent pay band in other pay systems in the Federal government. This experience may also have been obtained in the private sector, but must demonstrate that it is comparable to the GS grade indicated. Specialized experience may have been demonstrated by performing duties such as: experience, education, or training for management, supervision, or performance of planning, designing, construction, and/or maintaining structures and facilities; and investigating, measuring, surveying, and mapping the earth's physical features.
Your resume must have complete information: Please ensure your resume accurately reflects the duties and responsibilities under each position you have held with each employer. In describing your experience, please be clear and specific. It is your responsibility to make sure your resume states complete information for each job entry (beginning and ending dates of employment stated as MM/YYYY; and total hours worked per week). If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified and you will no longer be considered for this position.
Part-time or unpaid experience: Credit will be given for appropriate unpaid work on the same basis as for paid experience. Part-time experience will be credited on the basis of time actually spent in appropriate activities. To receive credit for such experience you must indicate clearly the nature of the duties and responsibilities in each position held and the number of hours per week spent in such employment.
Qualifications must be met by the closing date: You must meet all qualification and eligibility requirements by 09/30/2026
A. Degree: Professional Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
When there is a positive education or certification requirement, or you are using education to qualify as a substitution for experience, copies of transcripts (unofficial) and/or certificates are required at the time of application to verify that you meet the educational/certification requirement or substitution. Failure to provide transcripts and/or certificates at the time of application will result in automatic disqualification.
Only attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education may be credited. Applicants can verify accreditation at the following website: www.ed.gov/admins/finaid/accred/index.html.
Foreign Education: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.
Tracey Huerta
The California Military Department is a diverse, community-based organization comprised of four pillars: the California Army National Guard, the California Air National Guard, the California State Military Reserve and the California Youth and Community Programs. Across our organization, we are committed to improving, preparing and protecting our communities, state and nation. The California Military Department - we are a force like no other.