1255 electrical jobs found in Livermore, CA

The ideal candidate takes pride in their hands-on work, technical ability, organizational skills, safety record and attention to detail. They appreciate an environment where innovative and high-quality work is encouraged, noticed and rewarded and where individuals carry tremendous responsibility. They look forward to learning an incredible amount on the job. Seeking for an excellent doer who pays special attention to safety and quality. The Role Support commissioning Engineer throughout project life cycle (pre-design, design, construction, and start-up phase) to ensure electrical system functions in accordance with the design intent and Plant Operation requirement Lead new installation inspection prior to equipment start-up and ensure installation meets National Electrical Code, state and local building code, and Tesla standards Produce as-built drawings markups for delivery to the design team for Record drawing preparation Install, terminates, troubleshoots,...

This role focuses on noise, vibration, and harshness (NVH) testing and validation for power electronics, motors, and related systems within Tesla's vehicle powertrain and thermal architectures. The NVH Test Engineer will collaborate with design, firmware, and controls teams to ensure optimal acoustic performance, provide actionable feedback, and drive continuous improvement in component design and system integration. This position plays a critical role in enhancing vehicle quality by balancing noise reduction with cost, mass, and complexity considerations. The Role Perform noise and vibration testing on components for motors and power electronics, including vehicle powertrain and thermal systems Conduct stationary and driving vehicle tests to validate performance, design changes, and firmware tuning Provide feedback to design teams on countermeasures and improvements for component design and firmware/controls related to NVH Design and maintain a noise attributes...

Self Perform Construction is currently recruiting for a trade specific, Mechanical/Electrical Construction Estimator. As a Construction Estimator at Tesla, you will play a pivotal role in overseeing the execution of various self-perform mechanical & electrical construction projects, focused on execution-phase estimating for Tesla's manufacturing facilities. You will combine deep fundamental knowledge of cost drivers with real-time project oversight developing change order estimates, forecasting Estimate at Completion (EAC), performing variance analysis, monitoring productivity, and driving value engineering decisions while construction is underway. The Role Collaborate with project managers to provide real-time cost support from construction kickoff through project closeout Develop detailed change order estimates rapidly and accurately, clearly articulating cost impacts, schedule implications, and risk exposure Perform continuous cost forecasting, including...

As an Electrical Foreman with the Self Perform team, you will oversee all phases of commercial renovation and construction, managing multiple crews across various electrical disciplines including power distribution, lighting, and control panels. This role requires strong leadership, effective project management, and adherence to safety and compliance standards to ensure successful execution of electrical scopes. The Role Allocate resources effectively to meet project demands and ensure efficient manpower utilization Collaborate on renovation projects for phasing and scoping for removal of existing electrical distribution systems Lead job walks to assess work locations, identify issues, develop takeoffs, and create accurate estimates Collaborate with superintendents on scope alignment, safety planning, material logistics, and conduct kickoff meetings for project execution Oversee field operations by aligning Foremen with execution expectations, tracking...

In this position, you will work as a member of Tesla Facilities Quality and Commissioning for electrical systems. The primary role is to ensure that installation methods and materials used are compliant with Tesla standards and the National Electrical Code. In addition, the role requires acting as a lead during testing of line voltage for equipment, ensuring proper procedures are followed. The position is mostly 'boots on the ground,' requiring an in-field presence with some reporting and data collection performed both manually and electronically. A successful candidate must have the ability to work independently, possess strong communication and coordination skills, be detail-oriented, and have availability/flexibility with working hours. They must be able to establish and maintain a professional working relationship with Tesla and contractor teams at various levels across the company. The Role Inspection/verification of electrical systems to ensure installations meet or...

This position is expected to start around January 2027 and continue through the entire Spring term (ending approximately May 2027 or later, if available). We ask for a minimum of 12 weeks, full-time (40 hours/week) and on-site, for most internships. Our internship program is for students who are actively enrolled in an academic program. Recent graduates seeking employment after graduation and not returning to school should apply for full-time positions, not internships. International Students: If your work authorization is through CPT, please consult your school on your ability to work 40 hours per week before applying. You must be able to work 40 hours per week on-site. Many students will be limited to part-time during the academic year. Internship Program at Tesla The Internship Recruiting Team is driven by the passion to recognize and develop emerging talent. Our year-round program places the best students in positions where they will grow technically, professionally, and...

As Electrical Engineer on the Lighting Systems and Mechatronics Engineering team, you will be responsible for overseeing all electrical aspects of our designs. At Tesla, you will work alongside the most creative and resourceful engineers in the world on a lean and agile team. From concept definition to production design release and launch, you will ensure that the latest technologies and industry-leading products are delivered for all global markets. The Role Start-to-finish hardware definition and design support: Specification, architecture, design, simulation, schematic, layout supervision, manufacturing, bringup, and validation of circuit boards Collaborate with PCB layout, firmware, mechanical, program management, and validation teams Thoroughly document design requirements, calculations, validation results, etc. Rapidly iterate as design requirements and product features mature over time Support supplier launch activities and vet quality control systems...

In the Abuse Testing & Engineering group, we push energy storage and power electronics to their limits and beyond using specialized equipment to apply electrical, mechanical, and thermal stresses. Our goal is to provide rapid feedback to inform designs early in development, by understanding how robust systems perform under abusive conditions. We accommodate external regulations but have a strong focus on internal requirements and test to failure. Every Tesla battery product comes through our lab, both vehicles and energy storage. Our environment is fast-paced and incredibly exciting. We are looking for an Engineer to test a variety of electrically abusive scenarios for power electronics and battery systems across both vehicle and energy products. In this role, you would collaborate with "Pack" and Electronics Design Engineers to design subscale and full-scale tests that meet our requirements, as small as a single cell and as large as an entire product. You would own the testing,...

The Facilities team has an immediate opportunity for a Staff Facility Electrical Engineer to play an integral role in the growth and maintenance of our facility. Candidates should possess direct construction experience in building high-tech infrastructure and operational facilities. This position is in Fremont, California. The Role Perform facility-wide electrical evaluations, energy audits, load studies, voltage-sag and power-quality analysis to drive reliability and efficiency improvements Lead commissioning, validation, and optimization of electrical infrastructure; execute efficiency initiatives that reduce plant energy consumption and cost Operate, program, maintain, and troubleshoot medium-voltage equipment, protective relays, and critical power systems in an active manufacturing environment Develop electrical specifications; review design drawings; run bid events and evaluate quotes; support electrical cost estimating and value-engineering...

We are seeking a highly skilled Senior Electrical Engineer to join our Drive Inverter Reliability Test Team to work on the latest edge of technology drive inverters. The ideal candidate will have a strong background in electrical engineering, with significant experience in inverter design and testing. This role focuses on ensuring the reliability and performance of drive inverters for our cutting-edge EV technology. The Role Design, execute, and analyze reliability tests for drive inverters Collaborate with cross-functional teams to identify and mitigate potential reliability issues Utilize electronic design software to simulate and troubleshoot inverter circuits Provide technical guidance and mentorship to Junior Engineers and Technicians Prepare and present detailed reports on test findings and recommendations Requirements Degree in Electrical Engineering or equivalent experience Minimum of 2+ years of experience in inverter design and...

Tesla is looking for an innovative Sr. Electrical Engineer to join our Factory Engineering team in Fremont, CA. The electrical team is responsible for creating and maintaining the factory of the future by overseeing the design, implementation, maintenance, and operation of cutting-edge, large-scale equipment and utility systems in support of highly innovative manufacturing processes. The ideal candidate takes pride in their hands-on work, analytical ability, organizational skills, and attention to detail. They appreciate an environment where innovative and high-quality work is encouraged, noticed, and rewarded, and where individuals carry tremendous responsibility. This is a full-time, on-site position. The Role Serve as the ultimate system owner for electrical equipment, bridging the gap between front-end engineering design and real-world field operations Plan, coordinate, and execute complex maintenance shutdowns. Develop, review, and execute detailed Methods of...

In this role you'll work closely with the Compliance Engineers. You will assist with product preparation and test, interface with regulatory bodies to plan and execute product and component certifications. Support the development and realization of automated test systems and manage test assets. Install and setup test samples and infrastructure (equipment). You'll be required to work on ELV, LV and HV systems both within the Tesla Laboratory and external testing facilities. Maintain ISO 17025 QMS accreditation, and the smooth running of the laboratory including the purchasing of consumables, equipment and services including calibration management. A high degree of integrity and ethics are required for this regulatory role. The Role Prepare and instrument test samples, execute tests, record, and analyze results on power electronics and battery storage systems 3D CAD skills (preferred), schematic capture Assist with testing at in-house and local contract...

Designing and building factory infrastructure at record speed is key to enabling Tesla to scale. We are looking for a Staff Electrical Engineer to lead a small electrical design team supporting vehicle and factory programs across our Lathrop and Fremont sites. As part of the EPC Infrastructure Design Engineering group, you will bring deep electrical engineering expertise and combine it with people leadership, balancing technical judgment with prioritization, resource planning, and cross-functional coordination. You will remain hands-on on complex scopes while coaching a small team through concept design, detailed engineering, permit packages, and construction support. Regular travel between Fremont and Lathrop is required. The Role Lead a small electrical engineering team through planning, prioritization, people and resource management, and delivery across active factory programs at Fremont and Lathrop Own electrical design quality from concept through IFB/IFP/IFC...

As a Senior Electrical Estimator at Tesla, you will play a pivotal role in driving the success of critical facility projects across Tesla's manufacturing and infrastructure portfolio. You will bring deep technical expertise in electrical systems to deliver accurate, timely, and value-driven cost estimates while enabling rapid scaling of Tesla's facilities at unprecedented speed. Your work will directly influence project feasibility, budgeting, and execution strategy-ensuring electrical systems are both innovative and cost-optimized. The Role Develop and present conceptual and detailed cost estimates for complex electrical infrastructure projects across Tesla facilities Perform comprehensive electrical quantity takeoffs from construction drawings, specifications, single-line diagrams (SLDs), electrical schedules, and system layouts using tools like Bluebeam, Revit, and estimating software Lead estimation for all aspects of electrical systems, including: High Voltage...

Tesla is looking for an innovative Sr. Electrical Design Engineer with strong proficiency in Autodesk Revit to join our Factory Design team in Fremont, CA. The electrical design team is responsible for designing state of the art power distribution systems to support factory infrastructure and manufacturing equipment. This position is full time, onsite. As part of the EPC group, this team is focused on designing, collaborating, and building the first home of Optimus while continue to support critical vehicle programs. The Role Lead electrical designs, concept evaluations, and construction drawing completion for permits and execution Responsible to prepare electrical deliverables with respect to code compliance using Revit: Single line diagram, panel schedule, grounding drawing, conduit drawing, power plan, lighting layout, area classification drawing Review submittals, vendor shop drawings, and designs for quality control, constructability, and cost Collaborate...

Consider before submitting an application This position is expected to start January 2027 and continue through the entire Winter/Spring term (i.e through April/May 2026) or into Summer 2027 if available. We ask for a minimum of 12 weeks, full-time (40 hours/week) and on-site, for most internships. International Students: If your work authorization is through CPT, please consult your school before applying. You must be able to work 40 hours per week. Many students will be limited to part-time during the academic year. The Internship Recruiting Team is driven by the passion to recognize and develop emerging talent. Our year-round program places the best students in positions where they will grow technically, professionally, and personally through their experience working closely with their Manager, Mentor, and team. We are dedicated to providing an experience that allows the intern to experience life at Tesla by including them in projects that are critical to their team's...

Tesla is looking for an experienced and motivated senior electrical designer to join our Construction Design team in Fremont, CA. As part of the EPC group, this team is focused on designing, collaborating, and building the first home of Optimus while continue to support critical vehicle programs. The electrical design team is responsible to create and maintain CAD models of the power distribution system infrastructure and tool equipment. This position is for full-time, on-site. The Role Manage electrical Revit contents (templates and families) and Revit views Responsible for preparing electrical permit and construction drawings: Power plan drawings, underground and aboveground raceway design drawings, grounding layout drawing, lighting layout drawings Modeling electrical infrastructure per projects level of detail (LOD) needs; create material take-offs Participate in design and construction phases, including schematic design, design development,...

We are seeking an experienced and knowledgeable Electrical Engineer to join our Commercial Operations team at Tesla. In the Electrical Engineer - BOP, Commercial Operations position, you will serve as a key subject matter expert supporting the safe and efficient maintenance and operation of high/medium voltage, balance of plant (BOP), and control equipment for Tesla's Commercial Energy products. You will provide remote engineering support to field operations and subcontractor teams, offering troubleshooting expertise and technical guidance with the goal of enabling or restoring site operation. Provide authoritative guidance in collaboration with program leaders to drive sustainable solutions and standards. In addition, you will drive the development and execution of a new program framework in collaboration with business operations and technical program teams, foster strong cross-functional relationships, and lead continuous improvement initiatives across the organization. You...

Requisition ID # 171823  Job Category: Engineering / Science  Job Level: Individual Contributor Business Unit: Strategy & Growth Work Type: Onsite Job Location: Danville; San Ramon     Position Summary This position is for a Sr. ATS Electrical Engineer that performs electrical testing and engineering analysis in the field and at ATS labs. Work duties may include grounding safety studies, facility arc-flash hazard analysis, underground cable testing, EMF Program Support, equipment failure analysis, engineering support for safety investigations, and general electrical engineering analysis.  This work supports Company goals for enhanced Public Safety, Employee Safety, Risk Reduction, and Wildfire Safety and Compliance.   The selected candidate must live within PG&E’s service territory.    PG&E is providing the salary range that the company in good faith believes it might pay for this position at the time of the job posting. This compensation range is...

Requisition ID # 166916  Job Category: Engineering / Science  Job Level: Manager/Principal Business Unit: Electric Engineering Work Type: Onsite Job Location: San Ramon     Department Overview Applied Technology Services (ATS) at Pacific Gas and Electric (PG&E) has delivered innovative, value-driven technology solutions for over 40 years. With a team of more than 120 engineers, scientists, and technicians, ATS aims to lead with forward-thinking approaches and industry’s best practices. These services also help prevent future issues across the company.   Position Summary Join PG&E's Applied Technology Services (ATS) Engineering team and help drive solutions across a wide range of technical challenges. Our experts work in multiple disciplines, supporting company-wide initiatives and recommending best practices to prevent issues before they occur. From inspecting and analyzing equipment to evaluating performance and demonstrating new tech, you’ll play a...