13 information systems instructor jobs found

Standard Job Description What You Will Be Doing: You will be the U-2 Aircraft Modification Technician for the Aircraft Modification Team which is responsible for delivering precise (Structural) modifications to U-2 Aircraft stationed at Beale AFB, California. Additional requirements and responsibilities include but are not limited to:  - Heavy Depot Level Maintenance, Repair and modification of the aircraft structure and major subassembly's. Plan, layout, fabricate, assemble, install, and repair various sheet metal and structural assemblies and sub-assemblies utilizing precision measuring equipment. - The candidate will be able to complete jobs in maintenance data collection systems, adhere to all technical orders, fault isolation manuals, ground operating procedures and local operational instructions. Further Information About This Opportunity: MUST BE A U.S. CITIZEN – This position is located at a facility that requires special access. The selected candidate must...

Standard Job Description You will be the CSO/Mission Planner for an Advanced Development Program. Our team works with Production Support and Test & Evaluation teams to ensure effective build out of developmental and implementation of official training, documentation and operational capabilities. You will also be a primary advanced UAS operator and lead instruction for Type I and Type IV training of both company and customer students/operators. What You Will Be Doing As a CSO/Mission Planner your responsibilities will include: • Provide Flight/Sim Operations support as an aircraft Combat Systems Operator (CSO) and mission planner. • Will perform academic classroom training, planning and aircraft ground and flight/sim training for customer aircrew. • Perform technical and mission planning, real-time troubleshooting, analysis, and evaluation of systems, and provide recommendations to improve Human Machine Interface of aircraft and ground station functionality. • Provide...

Standard Job Description You will be the UAS Pilot - Skunk Works for the which is responsible for advanced unmanned aircraft development and testing. What You Will Be Doing As the UAS Pilot - Skunk Works you will be responsible for providing expert flight‑operations support for experimental, engineering, and production‑acceptance flight tests of Remotely Piloted Aircraft (RPA). Your responsibilities will include: - Planning, executing, and evaluating flight‑test missions to ensure compliance with specifications and operational suitability. - Delivering classroom, ground, and flight training for customer aircrew and support academic instruction. - Performing technical and mission planning, systems integration, and real‑time troubleshooting during flight operations. - Providing avionics expertise and guidance to engineering, design, development, and marketing teams. - Analyzing test data and recommending improvements to Human‑Machine Interface and ground‑station functionality....

Standard Job Description We are Lockheed Martin - Provides direction to primarily hourly/non-exempt subordinates using established policies and precedents. - Administers and executes policies and procedures that typically affect individual subordinate employees. - Ensures company, customer, engineering, and service guidance specifications/regulations are met. - Responsible for driving and adjusting as necessary work assignments to meet mission goals. - Ensures that tasks are completed on schedule and within budget following established procedures, schedules, and work plans. - Provides direction of daily operations of a section and actively assists, or provides direction to, subordinates as required. Develops work assignments and assesses work performance. - Sets priorities and job assignments, coordinates with FTCE’s for troubleshooting path on Avionic/Mechanical issues and regressions on Avionic systems. - Work is reviewed for overall quality and efficiency. - Ability to...

Standard Job Description We are Lockheed Martin - Provides direction to primarily hourly/non-exempt subordinates using established policies and precedents. - Administers and executes policies and procedures that typically affect individual subordinate employees. - Ensures company, customer, engineering, and service guidance specifications/regulations are met. - Responsible for driving and adjusting as necessary work assignments to meet mission goals. - Ensures that tasks are completed on schedule and within budget following established procedures, schedules, and work plans. - Provides direction of daily operations of a section and actively assists, or provides direction to, subordinates as required. Develops work assignments and assesses work performance. - Sets priorities and job assignments, coordinates with FTCE's for troubleshooting path on Avionic/Mechanical issues and regressions on Avionic systems. - Work is reviewed for overall quality and efficiency. - Ability to work...

Standard Job Description Develops and performs experimentally, the bench and ship layout, fabrication of parts from raw stock, and the assembly, installation and mating operations required for the building of prototype product structures such as airframe, for the purpose of creating or proving engineering design, to the point where sufficient information is gathered and the work may be delegated to others such as production bench, fabrication, assembly and/or installation personnel, or to subcontractors. Incorporates major revisions in prototype structure on the level of difficulty of the work described herein, by developing and performing experimentally, the required layout, fabrication, assembly, installation, and mating operations. Works closely with authorized liaison personnel, and suggests, orally or by sketches, design changes for engineering approval, when part of assembly cannot be made or installed as designed, or does not seem to meet functional demands, or where...

Standard Job Description As an Integration & Assembly Manufacturing Engineer, you will be primarily responsible for planning, preparing for, and executing air‑vehicle builds, as well as related testing and ground-support operations Key Responsibilities: Develop, implement, and refine hardware integration, assembly, manufacturing processes and build sequences. Collaborate with design engineering teams and other disciplines to provide feedback on designs and specifications, ensuring manufacturability and optimal use of available equipment and methods. Identify and resolve issues related to hardware, tooling, process capability, and production inefficiencies through root cause analysis and corrective action implementation. Evaluate equipment and tool performance to verify efficiency, reliability, and alignment with production requirements. Respond to production issues and facilitate removal of build constraints with extreme ownership. Operate within a model-based engineering...

Standard Job Description Responsible for F-22 Flight Test avionics/electrical maintenance efforts at Edwards AFB, California. -Performs the operational check-out of avionics/electrical systems prior to or after installation on F-22 aircraf. The alignment,testing, modification, diagnosis, and correction of causes of trouble in such systems. The construction, modification, calibration, and testing of electronic testing equipment on F-22 aircraft.  Must be able to make complete operational test of avionics/electronics equipment and test equipment including major troubleshooting. Modifies electronic equipment as required by customer specifications. Responsible for complete operational check-out of at least one major production, prototype, new or modified electronic system prior to or after installation on the airplane. Diagnoses malfunctioning and performs rework, repair, adjustment, replacement of parts indicated as necessary by results of the checks through use of volt ohmmeters,...

Standard Job Description Who We Are This exciting position is with our historic Skunk Works program. Skunk Works is an integral part of Lockheed's Aeronautics business area responsible for advanced systems development including conceptual design and rapid prototyping of clean sheet solutions and improvements and derivatives to existing systems. The ideal skunk is an agile, multi-faceted teammate who loves to solve our customer's most difficult challenges. Some of our unclassified projects include the U-2, SR-71 Blackbird, F-22 Raptor, F-117 Nighthawk, and the F-35 Lightening II. Learn more about some of the incredible things we do. Who You Are You are a multi-faceted teammate able to communicate and function effectively on an engineering team to create a collaborative environment that allows for the establishment of mission goals. Self-motivated and inspired, you thrive in an environment where you are empowered to work your craft, never settling for the bare minimum. What...

Standard Job Description Lockheed Martin Aeronautics Company, home of the world-renowned Skunk Works®, turns visionary aircraft into reality and is known for building the finest military aircraft in the world. This recognition is continually earned through our commitment to relentless research and development of high-performance aircraft, continuously seeking innovative, low-cost design and manufacturing strategies, and delivering operational readiness for our customers' missions to ensure continued relevancy for the life cycle of our products. In this position the successful candidate will be responsible for the development of training requirements and implementation of courseware to instruct Aircrew/Maintenance functions, including simulation and scenarios used for customer training. The selected candidate will be responsible for developing highly creative training courses for existing and new systems. The ideal candidate will provide all aspects of aircrew/maintenance...

Standard Job Description Lockheed Martin Aeronautics Company, home of the world-renowned Skunk Works®, turns visionary aircraft into reality and is known for building the finest military aircraft in the world. This recognition is continually earned through our commitment to relentless research and development of high-performance aircraft, continuously seeking innovative, low-cost design and manufacturing strategies, and delivering operational readiness for our customers' missions to ensure continued relevancy for the life cycle of our products. In this position the successful candidate will be responsible for the development of training requirements and implementation of courseware to instruct Aircrew/Maintenance functions, including simulation and scenarios used for customer training. The selected candidate will be responsible for developing highly creative training courses for existing and new systems. The ideal candidate will provide all aspects of aircrew/maintenance...

Standard Job Description As an Integration & Assembly Manufacturing Engineer, you will be primarily responsible for planning, preparing for, and executing air‑vehicle builds, as well as related testing and ground-support operations Key Responsibilities: Develop, implement, and refine hardware integration, assembly, manufacturing processes and build sequences. Collaborate with design engineering teams and other disciplines to provide feedback on designs and specifications, ensuring manufacturability and optimal use of available equipment and methods. Identify and resolve issues related to hardware, tooling, process capability, and production inefficiencies through root cause analysis and corrective action implementation. Evaluate equipment and tool performance to verify efficiency, reliability, and alignment with production requirements. Respond to production issues and facilitate removal of build constraints with extreme ownership. Operate within a model-based engineering...

Standard Job Description Develops and performs experimentally, the bench and ship layout, fabrication of parts from raw stock, and the assembly, installation and mating operations required for the building of prototype product structures such as airframe, for the purpose of creating or proving engineering design, to the point where sufficient information is gathered and the work may be delegated to others such as production bench, fabrication, assembly and/or installation personnel, or to subcontractors. Incorporates major revisions in prototype structure on the level of difficulty of the work described herein, by developing and performing experimentally, the required layout, fabrication, assembly, installation, and mating operations. Works closely with authorized liaison personnel, and suggests, orally or by sketches, design changes for engineering approval, when part of assembly cannot be made or installed as designed, or does not seem to meet functional demands, or where...