17 equipment associate jobs found

Engineering Technician - V (Support Equipment) The incumbent shall provide Fleet shore activities, CVN, and L class ships technical advice, assistance and on the job training (OJT) to Navy, Marine Corps military and civilian personnel on the acceptance, installation, operation, and/or maintenance of Support Equipment (SE), to include but not limited to: Ground Support Equipment (GSE).  This acquisition is for Contract Field Services type of Engineering Technical Services (ETS) in support of SE. Duties and Responsibilities Provide Contract Engineering Technical Services (CETS) for the SE OJT training and assistance on the aviation programs, systems and equipment. Provide on-site academic instruction and on-equipment proficiency training to Navy and Marine Corps personnel, Navy Engineering and Technical Services (NETS) Specialists, and other Government employees, on the operation/maintenance of SE on the aviation programs, systems and equipment. Assist the NATEC Technical...

Engineering Technician - V (Support Equipment) The incumbent shall provide Fleet shore activities, CVN, and L class ships technical advice, assistance and on the job training (OJT) to Navy, Marine Corps military and civilian personnel on the acceptance, installation, operation, and/or maintenance of Support Equipment (SE), to include but not limited to: Ground Support Equipment (GSE).  This acquisition is for Contract Field Services type of Engineering Technical Services (ETS) in support of SE. Duties and Responsibilities Provide Contract Engineering Technical Services (CETS) for the SE OJT training and assistance on the aviation programs, systems and equipment. Provide on-site academic instruction and on-equipment proficiency training to Navy and Marine Corps personnel, Navy Engineering and Technical Services (NETS) Specialists, and other Government employees, on the operation/maintenance of SE on the aviation programs, systems and equipment. Assist the NATEC Technical...

Amentum is seeking a Weather Systems Technician for the Space Force Range Contract. Typical Duties Operate, maintain, and repair Weather Tower instrumentation, Doppler Radar Wind Profilers, Lightning Detection systems, Rawinsonde/Radiosonde systems, Ocean Surveillance Radar RF and control systems, subsystems and components. Displays a thorough understanding of weather sensor systems and radar systems. Good record keeping and verbal communications skills. Works well independently and in a team environment. Other duties as assigned Minimum Requirements: Two or more years of applicable experience in electronics and electrical theory or applicable range experience desired. Associate degree in electronic technology, or two (2) year technical school, or equivalent military experience, or equivalent combination of education and work experience  Computer operation and software skills to maximize productivity software and data systems. Ability to work...

Location: Jubail Saudi Arabia Will perform Field and Sustainment Level maintenance support/augmentation to include: Production control, Quality Control, Supply Management, maintenance, and repair of aircraft. Position requires a skilled Engine / Drivetrain Mechanic with the ability to perform Intermediate Maintenance Periodicity requirements on MH-60R helicopters. Organizational, Intermediate, and Depot level skills are desired to inspect, repair, and fabricate propulsion and drive chain components. Also requires inspection and repair of flight control components and systems. Shall work in specialized shops associated with fixed base operations Field Level maintenance as well as perform troubleshooting, testing, maintenance repairs and Technical Directive compliance on the H-60 Airframe in Saudi Arabia . Essential Responsibilities:   Current or previous experience performing complex helicopter mechanical work to include but not limited to: Perform maintenance and repair of...

Job Description Amentum is seeking a General Maintenance Technician I to join our operations & maintenance team in Long Beach, CA. Compensation & Benefits: HIRING SALARY RANGE : $24/hr - $27/hr (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant internal equity, and alignment with market data.)  This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum please visit our career site: Typical work schedule will vary based on business demand.  This position is responsible for providing an entry level knowledge in responding to work orders, troubleshooting, and providing emergency and preventive maintenance and repairs on the building equipment, fixtures and systems in a manufacturing environment.   Working under supervision as a member of directed work team, this is a multi-craft position that may perform equipment repairs...

The T-34 Aircraft Mechanic-1 performs the maintenance, overhaul, repair, inspection, and aircraft servicing functions on assigned T-34 aircraft within an aircraft maintenance and operations environment in accordance with applicable instructions. PRINCIPAL ACCOUNTABILITIES Perform shop and flight line maintenance tasks ensuring aircraft structural integrity. Utilize hand tools, special tools, fixtures, and adhesives applicable to return aircraft to operational condition. Inspect, evaluate, and repair aircraft flight surfaces, wiring, structure, fuel tanks, canopies as well as wheel and tire assemblies. Operate all associated ground support equipment. Perform aircraft and equipment corrosion inspections. Remove, treat for corrosion, and apply protective coatings on aircraft and subcomponents. Use maintenance drawings and blueprints to accomplish repairs on assigned equipment. Coordinate maintenance efforts with assigned Site Leads or Maintenance Supervisors...

Amentum is seeking a qualified Painter, Automotive for our San Diego, California location. Paint or remove paint from contract units in accordance with customer specifications. Understands and applies various corrosion control methods and technologies. Position reports to Supervisor. Essential Responsibilities:   Coats surfaces of contract units with primer, paint, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices. Removes old paint using liquid paint remover and scraper or plastic/sand media blasting techniques. Smoothes surface with sandpaper and steel wool. Roughens aluminum surfaces with acid solution and steel wool to ensure that paint adheres to surface and provides corrosion control methods to customer specifications. Masks and covers portions of surfaces not to be painted. Paints insignia, letters or numerals on vehicle surface, using stencils. Perform all other position related duties as assigned or requested....

OCCUPATIONAL SUMMARY: Under general Engineering supervision, applies judgment to engineering duties. Familiar with standard concepts, practices, and procedures within a particular field. Relies on limited experience and judgment to perform functions of the job.  Perform engineering assessments of systems and operations associated with hypergolic propellants, cryogenics, pneumatics and life support equipment.  Provides limited technical guidance to technicians. This is a union represented, non-exempt position with the Teamsters and the hourly pay rate is $57.42. TYPICAL DUTIES:  Performs Engineering oversight ensuring the Mechanical Integrity Inspections of hazardous systems that identify, document, and resolve of system deficiencies are in compliance. Responsible for preparation, review and implementation of system designs as assigned by Management. Manages subcontractors throughout project phases to include updating schedules and coordinating assigned work and...

The Aircraft Worker performs pre/post-operational checks, fueling and operation of aircraft & support equipment, to include conditional/scheduled inspections and periodic maintenance. Essential Responsibilities: Performs aircraft movement, aircraft fuel/defuel, aircraft/rotor system tie down, install/uninstall blade restraints. Securing aircraft and blades, servicing aircraft/engines/transmissions, and directing maintenance turns. Provide aircraft movement/direction, fire guard services during ground and flight operations. Be familiar with all maintenance instruction manuals. Launch and recover aircraft in support of activity's flight schedule including helicopter landing signal services at site or at Naval Air Facility OLF. Use standard aircraft handling and taxi procedures, Standardization (NATOPS), specific aircraft manual, and local regulations. Detect corrosion and be familiar with the corrosion control manual. Perform equipment...

Amentum is seeking a motivated and technically capable Electrical/Mechanical Integration Field Engineer to join our engineering team based in China Lake, CA. This is a hands-on, multifaceted role that blends electrical troubleshooting, mechanical installation support, field execution, engineering design review, wiring documentation, test support, and technician mentorship. The ideal candidate will have a strong technical foundation, preferably supported by a STEM degree, and direct experience working with fielded hardware that includes electrical systems, low-voltage circuits, sensors, wiring harnesses, connectors, mechanical interfaces, brackets, enclosures, mounting hardware, and instrumentation. This role requires someone who can work from schematics, wiring diagrams, mechanical drawings, interface control documents, and field work instructions to support installation, checkout, fault isolation, corrective action, and configuration updates. This is not a desk-only...

Amentum is seeking an IT Support Technician to support our DHS customer at their regional CONUS and OCONUS facilities in Camarillo, CA. This is for a temporary, full-time position which is expected to last through 1/2027. This date could be extended . With your fantastic attention to detail and follow-through, you will provide Tier 2 IT help desk support, assisting with hardware and software troubleshooting and providing video teleconferencing and remote support. With your experience with Windows operating systems including patching and updates, Active Directory, data encryption, and backup software, you will make a great addition to our team. In addition to your technical experience, you also have exceptional customer service skills and are willing to go the extra mile.   Responsibilities: Provide LAN administrator support with the installation, configuration and maintenance of network communication devices, servers, network storage arrays and tape backup units...

Amentum is seeking a General Maintenance Technician to join our operations & maintenance team in Fontana, CA  The typical work schedule will be Monday - Friday 8-430 with minimal overtime during the week and the occasional weekend for special projects. Hours and days will depend on the needs of the business. HIRING SALARY RANGE: $24.00 -$27.00 per hour (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant internal equity, and alignment with market data.    Working under minimal supervision as a member of a self-directed work team, this is a multi-craft position that may perform equipment repairs and general non-licensed maintenance work, as well as support other licensed trades as directed. Requires good working knowledge of general maintenance, including minor duties in carpentry, painting, plumbing, and electrical.    The General Maintenance Technician must have the ability to identify and correct any safety-related issues...

The Aircraft Worker performs pre/post-operational checks, fueling and operation of aircraft & support equipment, to include conditional/scheduled inspections and periodic maintenance. Essential Responsibilities: Performs aircraft movement, aircraft fuel/defuel, aircraft/rotor system tie down, install/uninstall blade restraints. Securing aircraft and blades, servicing aircraft/engines/transmissions, and directing maintenance turns. Provide aircraft movement/direction, fire guard services during ground and flight operations. Be familiar with all maintenance instruction manuals. Launch and recover aircraft in support of activity's flight schedule including helicopter landing signal services at site or at Naval Air Facility OLF. Use standard aircraft handling and taxi procedures, Standardization (NATOPS), specific aircraft manual, and local regulations. Detect corrosion and be familiar with the corrosion control manual. Perform equipment...

The Aircraft Worker performs pre/post-operational checks, fueling and operation of aircraft & support equipment, to include conditional/scheduled inspections and periodic maintenance. Essential Responsibilities: · Performs aircraft movement, aircraft fuel/defuel, aircraft/rotor system tie down, install/uninstall blade restraints. · Securing aircraft and blades, servicing aircraft/engines/transmissions, and directing maintenance turns. · Provide aircraft movement/direction, fire guard services during ground and flight operations. · Be familiar with all maintenance instruction manuals. · Launch and recover aircraft in support of activity's flight schedule including helicopter landing signal services at site or at Naval Air Facility OLF. · Use standard aircraft handling and taxi procedures, Standardization (NATOPS), specific aircraft manual, and local regulations. · Detect corrosion and be familiar with the corrosion control manual. · Perform equipment pre-operational...

Amentum is looking for a qualified Aerospace Structural Welder to support our San Diego, California location. Job Summary: The Aerospace Structural Welder will perform standard cutting and welding operations to include by not limited to repair work and new fabrication activities based in carbon steel, aluminum, stainless steel, and galvanized pipe, plate, structural shapes, etc. Repair products by dismantling, straightening, reshaping, and reassembling parts using cutting torch, straightening press, and hand tools. Some metal working experience preferred such as the operation of a metal shear, brake, pipe bending, and various cutting tools. The incumbent may also design, weld, heat-treat, fabricate, and machine precision tools, components, and assemblies for related Ground Support Equipment (SE). The incumbent may advise about metal machining, welding and designs, manufactures, or modifies special precision tools, gauges, dies, and fixtures to facilitate welding or other shops...

The Aircraft Mechanic II performs maintenance on aircraft structure, landing gear, flight surfaces and controls, hydraulic, engines, auxiliary power unit, flight schedule and operations, ventilation and heating systems, phase inspections and preservation services. Essential Responsibilities: Repairs and rebuilds aircraft structures, such as blades and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, ensuring hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills are being used properly. Reads and interprets manufacturers' and maintenance manuals, OPNAV 4790, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Also local GOP,LOI, PQS, and Safety Orders. Performs 200-hour, progressive, isochronal, phase, periodic, and other...

Position Location: Downey, CA Amentum is actively seeking applicants for Staff Scientist 1 Amentum Position Description:   The Staff Scientist 1 shall perform , at a minimum, the following tasks and responsibilities in accordance with standard operating procedures : Must be able to obtain/maintain a DHS Suitability security clearance Handling, receipt, and processing of daily operational, Quality Assurance, verification and proficiency test samples potentially containing biological threat agents.  Receiving samples may require extended walking to/from laboratory areas and up and/or down several flights of stairs.  Samples may require being transferred from one area/cart/cooler to another, requiring staff to lift ~50-60 lbs.  Processing samples requires more than one (1) hour, but typically not to exceed four (4) hours, of repetitive motion (e.g. twisting/cutting/pipetting/gripping) on a regular, if not daily, basis. Performing non-research...