15 safety jobs found in Lemoore

Standard Job Description Provides a level of postsales support and service to customer sites and remote sites at a high-tech level that cannot be rendered by the basic level of field hardware and systems software service. Employee is usually introduced to the customer site when the nature of equipment service required is beyond the skill level possessed by the basic field/customer service engineer. What You Will Be Doing As a Nose to Tail (NTT) FSE, the preferred candidate will be a subject Matter Expert (SME) in Avionics/Mission Systems (MS). It is desired the individual also be an emerging authority in APG/Vehicle Systems (VS) or Supportable Low Observable (SLO)/Structures, with the skill set to accomplish troubleshooting and analysis of MS, VS, or SLO. The candidate will act as part of the Lockheed Martin Aeronautics Field Sustainment Team's technical interface to the on-site Customer (both Operations and Maintenance) in resolving issues arising from maintenance and...

The T-34 Aircraft Mechanic-1 performs the maintenance, overhaul, repair, inspection, and aircraft servicing functions on assigned T-34 aircraft within an aircraft maintenance and operations environment in accordance with applicable instructions. PRINCIPAL ACCOUNTABILITIES Perform shop and flight line maintenance tasks ensuring aircraft structural integrity. Utilize hand tools, special tools, fixtures, and adhesives applicable to return aircraft to operational condition. Inspect, evaluate, and repair aircraft flight surfaces, wiring, structure, fuel tanks, canopies as well as wheel and tire assemblies. Operate all associated ground support equipment. Perform aircraft and equipment corrosion inspections. Remove, treat for corrosion, and apply protective coatings on aircraft and subcomponents. Use maintenance drawings and blueprints to accomplish repairs on assigned equipment. Coordinate maintenance efforts with assigned Site Leads or Maintenance Supervisors...

Essential Responsibilities ·         A good working knowledge of the governing supply systems, programs, policies, nomenclature, work methods, manuals, or other established guidelines ·         Receive, inspect, and log incoming parts and supplies against purchase orders/ packing slips ·         Maintain accurate inventory counts through cycle counts and periodic physical audits ·         Organize and store materials in designated locations following safety and space standards. ·         Flag discrepancies, damage, or shortages to supervisors immediately ·         Pick, pack, and issue parts/supplies to technicians or departments per work orders ·         Generate reports on stock levels, usage trends, and reorder points Work Environment, Physical Demands, and Mental Demands: Typical warehouse environment with no unusual hazards, frequent lifting to 20-60 pounds, kneeling, standing, and walking, routinely sitting and constant use of speech/hearing abilities for...

The Ground Support Equipment Worker makes repairs to Ground Support Equipment (GSE) following orders of a higher-grade worker, troubleshooting malfunctions of GSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools, prepares GSE for storage and transportation, uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems. Essential Responsibilities This worker performs scheduled and unscheduled maintenance on GSE, inspects, tests, and operates GSE to determine equipment serviceability and proper operation, services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components. The Ground Support Equipment Worker removes, disassembles repairs, cleans, treats for corrosion,...

Amentum is currently searching for a Ground Support Equipment Worker to work in our Lemoore, California location.  The Ground Support Equipment Worker makes repairs to Ground Support Equipment (GSE) following orders of a higher-grade worker, troubleshooting malfunctions of GSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools, prepares GSE for storage and transportation, uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems. Essential Responsibilities This worker performs scheduled and unscheduled maintenance on GSE, inspects, tests, and operates GSE to determine equipment serviceability and proper operation, services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and...

Aircraft Mechanic I #10108  Lemoore, California, United States Apply         Job Description AIRCRAFT MECHANIC I (23021) Specialty:  Airframes / Structures / Powerplants / Avionics Location:  NAS Lemoore, CA Employment Type:  Full-Time | Onsite Clearance:  Secret | CAC required Summary Provides support of Organizational Level Line Division functions on F-35 aircraft in accordance with the Naval Aviation Maintenance Program (NAMP), applicable technical data, and federal contract requirements. Junior-level aircraft mechanic supporting F-35 aircraft launch and recovery operations. Essential Functions Perform complex aircraft maintenance, inspections, troubleshooting, repair, and modification Document maintenance actions in aircraft logs and approved maintenance systems Ensure...

Aircraft Mechanic II #10094  Lemoore, California, United States Apply         Job Description AIRCRAFT MECHANIC II (23022) Specialty:  Airframes / Structures / Powerplants / Avionics Location:  NAS Lemoore, CA Employment Type:  Full-Time | Onsite Clearance:  Secret | CAC required Summary Provides support of Organizational Level Line Division functions on F-35 aircraft in accordance with the Naval Aviation Maintenance Program (NAMP), applicable technical data, and federal contract requirements. Mid-level aircraft mechanic supporting F-35 aircraft launch and recovery operations. Essential Functions Perform complex aircraft maintenance, inspections, troubleshooting, repair, and modification Document maintenance actions in aircraft logs and approved maintenance systems May...

Aircraft Mechanic I (Power Plants) #10089  Lemoore, California, United States Apply         Job Description Job Title: Aircraft Mechanic I (Power Plants) Location: NAS Lemoore FRCW Task Description: Aircraft Mechanic I (23021): Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as...

Aircraft Worker #9942  Lemoore, California, United States Apply         Job Description AIRCRAFT WORKER (23080) Specialty:  Airframes / Structures / Powerplants / Avionics Location:  NAS Lemoore, CA Employment Type:  Full-Time | Onsite Clearance:  Secret | CAC required Summary Provides support of Organizational Level Line Division functions on F-35 aircraft in accordance with the Naval Aviation Maintenance Program (NAMP), applicable technical data, and federal contract requirements. Aircraft Worker supporting F-35 aircraft launch and recovery operations. Essential Functions Perform aircraft maintenance, inspections, troubleshooting, repair, and modification Document maintenance actions in aircraft logs and approved maintenance systems Ensure...

It's fun to work in a company where people truly believe in what they are doing. At Dutch Bros Coffee, we are more than just a coffee company. We are a fun-loving, mind-blowing company that makes a difference one cup at a time.  At Dutch Bros Coffee, we are a fun-loving, mind-blowing company, making a massive difference one cup at a time.  But let’s be real, this job isn’t for everyone. It’s fast, high-energy, and physically demanding. You’ll be on your feet, moving quickly, and keeping up with a steady flow of customers all while delivering next-level service. As the face of Dutch Bros, you’ll connect with customers, hustle with heart, and bring positive energy onto every single shift. What You’ll Do: Engage. Greet every customer with a smile, make genuine connections, and ensure every visit is full of kindness & fun. Educate. Help customers navigate the menu and discover new favorites, all while delivering top-tier service. Embody. Live out the Dutch Bros...

Job Title: Aircraft Mechanic III / Maintenance Control (NAMCE) Location: NAS Lemoore Preferred Airframes: F/A – 18 E/F/G Summary/Description: Works as a Safe-For-Flight (SFF) qualified mechanic. Services, repairs and overhauls aircraft to ensure airworthiness.  Repairs, replaces, and rebuilds aircraft structures of moderate difficulty, such as wings, fuselage, surface controls and functional components to include rigging, plumbing and hydraulic units utilizing hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet guns and drills.  Reads and interprets manufacturer’s publications, maintenance manuals, service bulletins and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Inspects aircraft components for fluid leaks, cracks, and other damage.  Troubleshoot, remove, replace, and repair aircraft structural and hydraulic system components....

Job Title: Mechanic I Machinist (AD) NAMCE Location: NAS Lemoore Preferred Airframes: F/A-18 E/F/G Summary/Description: Services, repairs and overhauls aircraft to ensure airworthiness.  Repairs, replaces, and rebuilds aircraft structures of moderate difficulty, such as wings, fuselage, surface controls and functional components to include rigging, plumbing and hydraulic units utilizing hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet guns and drills.  Reads and interprets manufacturer’s publications, maintenance manuals, service bulletins and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.  Inspects airframe and engine components for fluid leaks, cracks, and other damage.  Troubleshoot, remove, replace, and repair aircraft powerplant/fuel system components.   Perform miscellaneous duties to service aircraft systems.  As required by site...

Job Title: Mechanic I Airframer (AM) NAMCE Location: NAS Lemoore Preferred Airframes: F/A-18 E/F/G   Summary/Description: Services, repairs and overhauls aircraft to ensure airworthiness.  Repairs, replaces, and rebuilds aircraft structures of moderate difficulty, such as wings, fuselage, surface controls and functional components to include rigging, plumbing and hydraulic units utilizing hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet guns and drills.  Reads and interprets manufacturer’s publications, maintenance manuals, service bulletins and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.  Inspects airframe components for fluid leaks, cracks, and other damage.  Troubleshoot, remove, replace, and repair aircraft structural and hydraulic system components.  Perform miscellaneous duties to service aircraft systems.  As required by site...

Job Title: Mechanic I Airframer (AM) NAMCE Location: NAS Lemoore Preferred Airframes: F/A-18 E/F/G   Summary/Description: Services, repairs and overhauls aircraft to ensure airworthiness.  Repairs, replaces, and rebuilds aircraft structures of moderate difficulty, such as wings, fuselage, surface controls and functional components to include rigging, plumbing and hydraulic units utilizing hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet guns and drills.  Reads and interprets manufacturer’s publications, maintenance manuals, service bulletins and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.  Inspects airframe components for fluid leaks, cracks, and other damage.  Troubleshoot, remove, replace, and repair aircraft structural and hydraulic system components.  Perform miscellaneous duties to service aircraft systems.  As required by site...

Aircraft Mechanic I (Airframes) #10076  Lemoore, California, United States Apply         Job Description Task Description:   Aircraft Mechanic I (23021):    Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic, hydraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional...