14 bcba jobs found

The  Maintenance Test Pilot  (UH-72 A/B) utilizes flight test techniques to perform test flights of aircraft to measure performance and handling to determine airworthiness following maintenance or modifications. Perform test flights and demonstrate aircraft proficiency upon completion of aircraft maintenance or modifications on aircraft. Determine in accordance with publications and procedures the airworthiness of aircraft prior to release for flight. Perform recovery flights and ferries aircraft to additional sites, such as depots. Perform troubleshooting procedures of aircraft on the ground and during flight and make appropriate write-ups or give verbal instructions to correct deficiencies. Verify forms and records used in the performance of maintenance to ensure they comply with work performed prior to ground or flight checks. Run-up aircraft for alert status to perform test on modifications. Deploy when required to support contract requirements when maintenance...

The Aircraft Mechanic III (LUH-72) A&P performs maintenance on helicopters, excluding repair of systems according to drawings, blueprints, directives, technical manuals and safety procedures. ·         Removes and installs aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. ·         Services and lubricates aircraft and subsystems. ·         Prepare aircraft for inspections and maintenance checks. ·         Performs scheduled inspections and assists in performing special inspections. ·         Performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. ·         Uses and performs operator maintenance on tools, special tools and aircraft ground support equipment.  ·         Prepare forms and records related to aircraft maintenance.  ·         Removes and disassembles defective parts of the...

The Aircraft Mechanic I - LUH-72 A&P performs maintenance on helicopters, excluding repair of systems according to drawings, blueprints, directives, technical manuals and safety procedures. ·         Removes and installs aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. ·         Services and lubricates aircraft and subsystems. ·         Prepare aircraft for inspections and maintenance checks. ·         Performs scheduled inspections and assists in performing special inspections. ·         Performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. ·         Uses and performs operator maintenance on tools, special tools and aircraft ground support equipment.  ·         Prepare forms and records related to aircraft maintenance.  ·         Removes and disassembles defective parts of the...

The Aircraft Mechanic I Avionics/Electrician (UH-60) inspects and performs electrical maintenance on aircraft electrical systems and components according to drawings, blueprints, directives, technical manuals and safety procedures. Installs, removes, inspects, tests, adjusts, or repairs avionics equipment, such as radar, radio, and navigation systems in aircraft. Installs and repairs electrical wiring and/or cable on aircraft in adherence to established specifications. Diagnoses, troubleshoots, and repairs malfunctions in electrical and electronic components, including solid state and transistorized subsystems. Repairs aircraft instrument systems. Applies principles of electricity/electronics, hydrostatic motion, pneumatics and hydraulics applicable to repair aircraft instrument systems. Removes, installs, repairs, adjusts and tests electrical/electronic elements of assemblies and components according to technical manuals, directives and safety procedures. Cleans,...

The Aircraft Mechanic I - LUH-72 A&P performs maintenance on helicopters, excluding repair of systems according to drawings, blueprints, directives, technical manuals and safety procedures. ·         Removes and installs aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. ·         Services and lubricates aircraft and subsystems. ·         Prepare aircraft for inspections and maintenance checks. ·         Performs scheduled inspections and assists in performing special inspections. ·         Performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. ·         Uses and performs operator maintenance on tools, special tools and aircraft ground support equipment.  ·         Prepare forms and records related to aircraft maintenance.  ·         Removes and disassembles defective parts of the...

The Aircraft Mechanic I - LUH-72 A&P performs maintenance on helicopters, excluding repair of systems according to drawings, blueprints, directives, technical manuals and safety procedures. ·         Removes and installs aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. ·         Services and lubricates aircraft and subsystems. ·         Prepare aircraft for inspections and maintenance checks. ·         Performs scheduled inspections and assists in performing special inspections. ·         Performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. ·         Uses and performs operator maintenance on tools, special tools and aircraft ground support equipment.  ·         Prepare forms and records related to aircraft maintenance.  ·         Removes and disassembles defective parts of the...

Amentum is seeking an Area Control Center Supervisor for the Space Force Range Contract Typical Duties Supervise the Area Control Center (ACC) and Range Control Center (RCC) and it’s employees through the planning and scheduling process for launch and aeronautical operations. • Ensure control of airspace and air assets in support of launch operations, pre-launch tests, and aeronautical operations. • Serve as the liaison between Amentum, the Space Launch Delta 30 (SLD 30), 2ROPS/DON, Range Customers, and hosted organizations for Range support requirements. • Support launch and aeronautical operations in United States Space Force (USSF) certified Duty Air Controller (DAC), Air Controller (AC), Surface Area Surveillance Controller (SASC), and Instrumentation Controller (IC) positions. • Ensure the ACC is staffed with qualified personnel needed to successfully plan and manage launch, landing, and aeronautical operations. • Ensure personnel are properly trained to execute...

Amentum is seeking a Radar Planner/Controller for the Space Force Range Contract   Typical Duties Analyze and perform planning functions utilizing official Universal Documentation System (UDS) Assist Controllers with the coordination of personnel actions and managing mission systems during operations in the Range Control Center (RCC) or Missile Flight Control Center (MFCC) Manage critical, real-time Telemetry and/or Range Safety data required for the fulfillment of launch vehicle tracking requirements on the Western Range  Perform operational duties as a Telemetry Controller (TMC) or Radar Controller (RC), Acquisition Data Systems Controller (ADSC), and Real-Time Data Controller (RTDC) Perform operational duties as a planner in accordance with department needs Coordinate and provide direction to range systems in managing system data performance and integrating operations support Assist Controllers in managing daily operations of the appropriate system...

As the Site Lead Mechanic you will lead the effort for operating and maintaining the aircraft, aircraft subsystems, and support equipment. The CLS system includes all aircraft maintenance and personnel, materials and inspections, launch and recovery of the aircraft, supply of all Contractor owned spares and support equipment through a Contractor Owned and Maintained Parts (COMP); repair and overhaul of all repairable spares at Federal Aviation Administration (FAA) certified repair stations; maintenance and repair of all support equipment; aircraft paint; engine repair and overhaul. QUALFICATIONS 5 or more years aircraft maintenance experience 3 or more years maintaining King Air/1900 Airliner series aircraft to include complex aircraft modifications One or more year as a site lead under a similar type effort Current FAA A&P license Demonstrated ability to direct a work force in the performance of aircraft maintenance, repair, and modification Capable of...

The Aircraft Maintenance Supervisor is responsible for maintenance functions of assigned aircraft and is responsible for supervising day-to-day maintenance tasks on the aircraft, support equipment, and special tools. Principal Accountabilities: Manage all aspects of aircraft maintenance and ensure all work is scheduled and performed in a safe and efficient manner. Supervise maintenance staff, which includes reviewing employee performance, addressing personnel issues, generating assignments, and setting priorities. Perform scheduled/unscheduled maintenance, servicing, launch and recovery, corrosion control, and inspection, and routine through complex maintenance of aircraft, aircraft sub- systems, and components, as required. Perform engineering work orders regarding modifications and/or upgrades to various aircraft systems. Read and interpret manufacturers and company’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method...

 Aircraft Electrical Technician I Definition:    This is the entry and first working level for an aviation electrician. Incumbents at this level work under the instruction of an Aircraft Electrical Technician II and the direction of a Lead Technician to diagnose, inspect, repair and manufacture aircraft wiring and electrical systems and components; disassemble and overhaul aircraft electrical components; install and rig critical aircraft electrical components and return to service sophisticated electrical systems and components. Minimum Qualifications:   Possession of the following certificates: FAA Airframe Technician’s Certificate or FCC General Radio Certificate and a valid Class-C Driver’s License. One year of documented aerospace/aviation electrical work experience may qualify in lieu of certificates. *Garmin experience highly desired/preferred* Knowledge and Abilities : Aircraft AC and DC electrical systems, wire marking standards, electrical wiring...

Job Title: Aircraft Mechanic III / Maintenance Control (NAMCE) Location: NAS Lemoore Preferred Airframes: F/A – 18 E/F/G Summary/Description: Works as a Safe-For-Flight (SFF) qualified mechanic. Services, repairs and overhauls aircraft to ensure airworthiness.  Repairs, replaces, and rebuilds aircraft structures of moderate difficulty, such as wings, fuselage, surface controls and functional components to include rigging, plumbing and hydraulic units utilizing hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet guns and drills.  Reads and interprets manufacturer’s publications, maintenance manuals, service bulletins and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Inspects aircraft components for fluid leaks, cracks, and other damage.  Troubleshoot, remove, replace, and repair aircraft structural and hydraulic system components....

Aircraft  Electrical  Technician I Definition:    This is the entry and first working level for an aviation electrician. Incumbents at this level work under the instruction of an Aircraft Electrical  Technician II and the direction of a Lead Technician to diagnose, inspect, repair and manufacture aircraft wiring and electrical systems and components; disassemble and overhaul aircraft electrical components; install and rig critical aircraft electrical components and return to service sophisticated electrical systems and components. M inimum Qualifications: Possession of the following certificates: FAA Airframe Technician’s Certificate or FCC General Radio Certificate and a valid Class-C Driver’s License.  One year of documented aerospace/aviation electrical work experience may qualify in lieu of certificates. K n owledge and Abilities:  Aircraft AC and DC electrical systems, wire marking standards, electrical wiring fabrication, installation and repair electrical load...

Aircraft Mechanic III- Edwards      Performs inspection, maintenance and troubleshooting tasks on assigned aircraft.   Responsibilities include, but not limited to:    Adheres to all Technical Orders, GOPs/SOPs, Air Force Instructions, and any other directives identified by Site Management or the PWS Work with other mechanics and technical representatives to trouble shoot, diagnose and solve unusual and complex maintenance problems.  Ability to apply logic and good judgment, understand technical order diagrams and procedures, use test equipment for analysis of airframe, engine, flight control, pneudraulic, fuel, electrical/electronic systems, problems.  Plan and schedule aircraft utilization and maintenance activity and coordinates performance with operational customer.   Maintain accurate parts inventory.   Assign maintenance and repair tasks and monitors/evaluates their completion.  Responsibility to oversee and performs aircraft jacking, lifting, and towing...