Amentum

The  Maintenance Test Pilot  (UH-72 A/B) utilizes flight test techniques to perform test flights of aircraft to measure performance and handling to determine airworthiness following maintenance or modifications. Perform test flights and demonstrate aircraft proficiency upon completion of aircraft maintenance or modifications on aircraft. Determine in accordance with publications and procedures the airworthiness of aircraft prior to release for flight. Perform recovery flights and ferries aircraft to additional sites, such as depots. Perform troubleshooting procedures of aircraft on the ground and during flight and make appropriate write-ups or give verbal instructions to correct deficiencies. Verify forms and records used in the performance of maintenance to ensure they comply with work performed prior to ground or flight checks. Run-up aircraft for alert status to perform test on modifications. Deploy when required to support contract requirements when maintenance...

Location: Jubail Saudi Arabia Will perform Field and Sustainment Level maintenance support/augmentation to include: Production control, Quality Control, Supply Management, maintenance, and repair of aircraft. Position requires a skilled Engine / Drivetrain Mechanic with the ability to perform Intermediate Maintenance Periodicity requirements on MH-60R helicopters. Organizational, Intermediate, and Depot level skills are desired to inspect, repair, and fabricate propulsion and drive chain components. Also requires inspection and repair of flight control components and systems. Shall work in specialized shops associated with fixed base operations Field Level maintenance as well as perform troubleshooting, testing, maintenance repairs and Technical Directive compliance on the H-60 Airframe in Saudi Arabia . Essential Responsibilities:   Current or previous experience performing complex helicopter mechanical work to include but not limited to: Perform maintenance and repair of...

Amentum is seeking an Area Control Center Supervisor for the Space Force Range Contract Typical Duties Supervise the Area Control Center (ACC) and Range Control Center (RCC) and it’s employees through the planning and scheduling process for launch and aeronautical operations. • Ensure control of airspace and air assets in support of launch operations, pre-launch tests, and aeronautical operations. • Serve as the liaison between Amentum, the Space Launch Delta 30 (SLD 30), 2ROPS/DON, Range Customers, and hosted organizations for Range support requirements. • Support launch and aeronautical operations in United States Space Force (USSF) certified Duty Air Controller (DAC), Air Controller (AC), Surface Area Surveillance Controller (SASC), and Instrumentation Controller (IC) positions. • Ensure the ACC is staffed with qualified personnel needed to successfully plan and manage launch, landing, and aeronautical operations. • Ensure personnel are properly trained to execute...

Information Technology Manager Amentum is a global leader in advanced engineering and innovative technology solutions, trusted by the United States and its allies to address their most significant and complex challenges in science, security and sustainability. Our people apply undaunted curiosity, relentless ambition and boundless imagination to challenge convention and drive progress. Our commitments are underpinned by the belief that safety, collaboration and well-being are integral to success.   Headquartered in Chantilly, Virginia, we have approximately 50,000 employees in more than 70 countries across all 7 continents. Amentum is seeking an Information Technology Manager for a large-scale contract operated near the Riverside metro area. We are pipelining candidates for a future contract award. The candidate will perform the following duties: Responsible for overall information technology and network operations. Establishes and administers the overall strategies...

Amentum is seeking a Radar Planner/Controller for the Space Force Range Contract   Typical Duties Analyze and perform planning functions utilizing official Universal Documentation System (UDS) Assist Controllers with the coordination of personnel actions and managing mission systems during operations in the Range Control Center (RCC) or Missile Flight Control Center (MFCC) Manage critical, real-time Telemetry and/or Range Safety data required for the fulfillment of launch vehicle tracking requirements on the Western Range  Perform operational duties as a Telemetry Controller (TMC) or Radar Controller (RC), Acquisition Data Systems Controller (ADSC), and Real-Time Data Controller (RTDC) Perform operational duties as a planner in accordance with department needs Coordinate and provide direction to range systems in managing system data performance and integrating operations support Assist Controllers in managing daily operations of the appropriate system...

Position Overview: The Fuel Distribution Systems Mechanic (FDSM) Tech C operates, inspects, maintains, diagnoses, adjusts, and makes minor repairs to fuel distribution systems. This is an entry level position. The FDSM Tech C is knowledgeable of diagnostics equipment, hand and pneumatic tools, and measuring devices common to fuel system maintenance The FDSM Tech C assists in spill prevention and cleanup and environmental management. This is a union position with the Teamsters and the hourly pay rate is $41.07. Primary Responsibilities Installs, repairs and maintains liquid fuel storage, distribution, and dispensing systems. Manages and modifies liquid fuel systems and components. Checks components for operation, adjustment, pressures, and internal and external leaks under pressure. Troubleshoots malfunctions. Uses drawings and schematics to analyze and isolate malfunctions. Modifies equipment for specific missions or to increase efficiency. Performs...

Program Manager Amentum is a global leader in advanced engineering and innovative technology solutions, trusted by the United States and its allies to address their most significant and complex challenges in science, security and sustainability. Our people apply undaunted curiosity, relentless ambition and boundless imagination to challenge convention and drive progress. Our commitments are underpinned by the belief that safety, collaboration and well-being are integral to success.   Headquartered in Chantilly, Virginia, we have approximately 50,000 employees in more than 70 countries across all 7 continents. Amentum is seeking a Program Manager for a large-scale contract operated near the Riverside metro area. We are pipelining candidates for a future contract award. The candidate will perform the following duties: Directs, coordinates and manages overall Task Order functions Develops and implements strategies, policies, and procedures in the execution of this effort....

Cybersecurity Manager Amentum is a global leader in advanced engineering and innovative technology solutions, trusted by the United States and its allies to address their most significant and complex challenges in science, security and sustainability. Our people apply undaunted curiosity, relentless ambition and boundless imagination to challenge convention and drive progress. Our commitments are underpinned by the belief that safety, collaboration and well-being are integral to success.   Headquartered in Chantilly, Virginia, we have approximately 50,000 employees in more than 70 countries across all 7 continents. Amentum is seeking a Cybersecurity Manager for a large-scale contract operated near the Riverside metro area. We are pipelining candidates for a future contract award. The candidate will perform the following duties: Establishes and administers the overall strategies and procedures for the cybersecurity function Develops and implements cybersecurity program in...

Amentum is seeking a Radar Engineer Lead to support the Space Force Range Contract (SFRC)  Essential Functions:  Designs, develops, modifies, evaluates and implements new and existing Radar hardware systems.   Supports the radar lead engineer with the technical aspects of a project and the supporting multi- disciplined project team.    Researches, designs, develops, modifies, and implements highly complex, new and/or existing capabilities for Range radar support hardware systems. Assists with the development of complex systems modeling, simulation, and analysis to provide the most appropriate technical solution  Supports complex Level 1, 2, and 3 testing to qualify hardware systems for Range operations  Plans, conducts, and assists in the execution of projects  Develops, recommends, and implements design approaches for products and/or processes   Coordinates the efforts of technical support personnel for assigned projects  Analyzes, develops, recommends...

Essential Responsibilities: Moving goods packed on pallets or in crates around the storage facility, according to storage requirements, shelf-life regulations, and staging procedures. Stacking goods in the correct storage bays, following inventory control instructions. Ensuring loads are properly secure, including performing material handling procedures to correctly stack, palletize, ship, and move material. Stacking and storage of empty pallets, crates, etc. Performing daily equipment checks such as recharging the truck’s battery and lubricating equipment. Unloading materials and merchandise from incoming vehicles and stacking them to assigned places. Disposal of waste materials/recyclables through the use and movement of machine hoppers, roll-offs, and other required equipment. Locate and move stock of products to pallets or crates for storage or shipment. Identify damages and report shortages or quality deficiencies. Perform a variety of...

The CBP Aircraft Mechanic performs maintenance, overhaul, repair, inspection, and aircraft servicing functions on assigned aircraft within an aircraft maintenance and operations environment and in accordance with applicable instructions.   Principal Accountabilities: Perform maintenance, preventive maintenance, inspection, repair, and modification of aircraft in accordance with 14 CFR and Department of Defense (DoD) regulations, technical manuals, and other data as applicable. Perform daily and turnaround inspections on all assigned aircraft. Perform inspections, corrosion control, troubleshooting and fault isolation on aircraft systems. May be required to fly on Government aircraft for relocation, to conduct in-flight checks (test flights) and to conduct trouble shooting that cannot be completed on the ground. May be required to perform official travel to temporary duty sites within and outside the United States. Furnish own hand tools to...

Essential Responsibilities: Moving goods packed on pallets or in crates around the storage facility, according to storage requirements, shelf-life regulations, and staging procedures. Stacking goods in the correct storage bays, following inventory control instructions. Ensuring loads are properly secure, including performing material handling procedures to correctly stack, palletize, ship, and move material. Stacking and storage of empty pallets, crates, etc. Performing daily equipment checks such as recharging the truck’s battery and lubricating equipment. Unloading materials and merchandise from incoming vehicles and stacking them to assigned places. Disposal of waste materials/recyclables through the use and movement of machine hoppers, roll-offs, and other required equipment. Locate and move stock of products to pallets or crates for storage or shipment. Identify damages and report shortages or quality deficiencies. Perform a variety of...

Essential Responsibilities: Moving goods packed on pallets or in crates around the storage facility, according to storage requirements, shelf-life regulations, and staging procedures. Stacking goods in the correct storage bays, following inventory control instructions. Ensuring loads are properly secure, including performing material handling procedures to correctly stack, palletize, ship, and move material. Stacking and storage of empty pallets, crates, etc. Performing daily equipment checks such as recharging the truck’s battery and lubricating equipment. Unloading materials and merchandise from incoming vehicles and stacking them to assigned places. Disposal of waste materials/recyclables through the use and movement of machine hoppers, roll-offs, and other required equipment. Locate and move stock of products to pallets or crates for storage or shipment. Identify damages and report shortages or quality deficiencies. Perform a variety of...

The CBP Aircraft Mechanic performs maintenance, overhaul, repair, inspection, and aircraft servicing functions on assigned aircraft within an aircraft maintenance and operations environment and in accordance with applicable instructions.   Principal Accountabilities: Perform maintenance, preventive maintenance, inspection, repair, and modification of aircraft in accordance with 14 CFR and Department of Defense (DoD) regulations, technical manuals, and other data as applicable. Perform daily and turnaround inspections on all assigned aircraft. Perform inspections, corrosion control, troubleshooting and fault isolation on aircraft systems. May be required to fly on Government aircraft for relocation, to conduct in-flight checks (test flights) and to conduct trouble shooting that cannot be completed on the ground. May be required to perform official travel to temporary duty sites within and outside the United States. Furnish own hand tools to perform...

Job Description Amentum is seeking a General Maintenance Technician I to join our operations & maintenance team in Long Beach, CA. Compensation & Benefits: HIRING SALARY RANGE : $24/hr - $27/hr (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant internal equity, and alignment with market data.)  This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum please visit our career site: Typical work schedule will vary based on business demand.  This position is responsible for providing an entry level knowledge in responding to work orders, troubleshooting, and providing emergency and preventive maintenance and repairs on the building equipment, fixtures and systems in a manufacturing environment.   Working under supervision as a member of directed work team, this is a multi-craft position that may perform equipment repairs...

Amentum is seeking a Air Controller for the Space Force Range Contract   Typical Duties Controls Western Range (WR) airspace and air assets in support of daily tasking, pre-launch tests, and aeronautical tests Interfaces with Test Conductors and range instrumentation such as telemetry or metric radars, interfaces with Air Force and other government representatives, and provides assistance in resolving conflicts between support elements and range resources while conducting pre-launch operational testing Performs positive aircraft vectoring, air intercept control operations, and general airspace surveillance Supports WR launch operations in the AF-certified Duty Air Controller, Air Controller, and Surface-Air-Surveillance operator positions Other duties as assigned such as log keeping, scheduling range assets, and assisting with troubleshooting operational problems Minimum Requirements Associate's degree or two-year certificate from college or technical...

The CBP Aircraft Mechanic performs maintenance, overhaul, repair, inspection and aircraft servicing functions on assigned aircraft within an aircraft maintenance and operations environment and in accordance with applicable instructions.  Principal Accountabilities: Perform maintenance, preventive maintenance, inspection, repair, and modification of aircraft in accordance with 14 CFR and Department of Defense (DoD) regulations, technical manuals, and other data as applicable. Perform daily and turnaround inspections on all assigned aircraft Perform inspections, corrosion control, troubleshooting and fault isolation on aircraft systems. May be required to fly on Government aircraft for relocation, to conduct in-flight checks (test flights) and to conduct trouble shooting that cannot be completed on the ground. May be required to perform official travel to temporary duty sites within and outside the United States. Furnish own hand tools to perform...

The Aircraft Mechanic III (LUH-72) A&P performs maintenance on helicopters, excluding repair of systems according to drawings, blueprints, directives, technical manuals and safety procedures. ·         Removes and installs aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components. ·         Services and lubricates aircraft and subsystems. ·         Prepare aircraft for inspections and maintenance checks. ·         Performs scheduled inspections and assists in performing special inspections. ·         Performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required. ·         Uses and performs operator maintenance on tools, special tools and aircraft ground support equipment.  ·         Prepare forms and records related to aircraft maintenance.  ·         Removes and disassembles defective parts of the...

Amentum is seeking a Weather Technician/Observer for the Space Force Range Contract. Typical Duties Report to and receiving directions from the Weather Systems Manager Support completion of upper air observations using computer data and platform. This assignment requires the attention of one certified observer from the time of instrument preflight through the final transmission of data (approximately 3 hours). Operate the VSFB Representative Weather Observatory (RWO) during airfield operating hours (normally, Monday through Friday, 0730 to 1700 hours local time) to include after-hours or weekend support when airfield is open, to perform upper air and surface observations consistent with AFMAN 15-111 and AFMAN 15-124, FMH-3, and IAW 30 SWI 15-101 or supporting OPLANs Perform daily upper air balloon observations at 0000 and 1200 UTC (Coordinated Universal Time) every day. Perform weather observations at VSFB Weather Stations during airfield operating hours 24/7 in...

Amentum is seeking an Environmental Health and Safety Professional for the Space Force Range Contract   Typical Duties Support a comprehensive Environmental, Health, and Safety (EHS) Program Identify and address environmental, health, and safety concerns in assigned areas with minimal supervision Perform Occupational Safety inspections for contract-wide locations and provide technical advice and assistance to management and field personnel on a wide range of EHS and Industrial Hygiene programs Support the development and implementation of new EHS Programs Support/perform periodic risk assessments of assigned infrastructure and programs. Inform management when areas require attention and recommend corrective action Perform compliance testing/monitoring reviews to ensure compliance with regulatory requirements; assist in resolving observations as appropriate and follow through to ensure corrective action is taken Perform research, acquisition, and control of...