Lockheed Martin

Lockheed Martin's aircraft leadership is earned through relentless research and development of high-performance combat, air mobility and reconnaissance and surveillance aircraft. We also provide world-class training, focused logistics support, and advanced targeting and navigation technologies to enable the right people with the right skills to be in the right place at the right time with the right information and the right munitions to accomplish their missions.

As a premier systems integrator, Lockheed Martin puts it all together to create an integrated system of systems where the value of the whole is greater than the sum of its parts.

As technology grows and adversaries become more sophisticated, naval dominance, missile defense and nuclear deterrence must evolve to meet these new threats. To effectively defend our nation and allies, Lockheed Martin is providing the U.S. Navy and international navies with the solutions they need to maintain freedom of the seas and deter aggression.

Our maritime systems and technologies enable the U.S. Navy and international navies to accomplish a diverse set of missions in the air, on the sea’s surface, beneath the surface, in space and on land.

Shooting a missile down with a missile was once a concept only dreamed up in science fiction novels. We’ve made it scientific fact.

So what does it take to spot an enemy missile launch, identify its intended target, calculate its exact trajectory, launch an interceptor and guide it to destroy the threat in mid-air? All in a matter of seconds? It’s not easy – but at Lockheed Martin, we help customers solve the world’s most complex challenges. Here’s how

Lockheed Martin Sunnyvale, CA, USA
Jan 07, 2020
Full time
JOB ID:  511194BR Date posted:  Dec. 21, 2019 City:  Sunnyvale State:  California Program:  ATLO Description: IAM&AW HOURLY REPRESENTED EMPLOYEES WHO CURRENTLY WORK AT THE MAIN (SUNNYVALE/PALO ALTO) UNIT, SANTA CRUZ, VANDENBERG OR EASTERN RANGE FACILITIES MUST APPLY FOR THIS POSITION THROUGH LMCAREERS. Under limited technical guidance, perform the following duties in the field of antenna measurements and range operations, working from verbal information, test plans, or test procedures: Set up and perform mechanical alignments and operate RF signal scanners and laser tracker positioning systems in both the vertical and horizontal planes. Configure and operate complex winch equipment to position large spacecraft with the ranges. Plan and document methods and sequences for antenna range development, configuration, range probing and characterization, including coordinating the fabrication of antenna prototypes and test aids. Develop antenna design details including the computation of antenna range axial ratio, space loss, wavelength relative to nearfield/farfield measurements, and antenna range response to linear and circular polarization. Modify software to control automated antenna analyzers in conjunction with positioning systems tests. Implement and use advanced acquisition, analysis and processing software to produce automated antenna performance data tabulations and plots. Integrate both active and passive microelectronic components such as MIC and MIMIC devices with developmental antenna system to perform microwave component and antenna radiation pattern measurements, such as determination of phase characteristics, front-to-back ratio and antenna system efficiency. Acquire and process test data and prepare test report documentation using existing software programs and manual calculations resulting in both plotted and tabulated outputs to satisfy engineering and/or test procedure requirements. Validate data for performance limits and phenomena, corruption of data due to measurement errors, and conformance to specifications. Investigate operation failures, malfunctions and other difficulties occurring in complex RF range equipment, mechanical alignment and positioning systems and spacecraft antenna systems. Troubleshoot and implement necessary repairs. Basic Qualifications: Typically requires completion of a two-year program in electronics technology, including studies in microwave theory, and two years of directly related experience. Complete knowledge of both active and passive electromagnetic and microelectronic applications along with microwave / millimeter wave antenna range and measurement theory; thorough knowledge of antenna coordinate systems. Demonstrated knowledge of related microelectronic components such as MIC and MIMIC devices, of mechanical alignment and positioning systems and of advanced data acquisition, analysis and processing software. Demonstrated ability to integrate active and passive microelectronic and mechanical devices with developmental antenna systems Desired Skills: Experience setting up RF test equipment including antenna, RF transmitters and receivers. Experience with operating and calibrating network analyzers and spectrum analyzers. Experience with mechanical lifting and alignment operations. Experience using automation tools such as automation framework to execute testing operations. Understanding of antenna performance metrics such as gain, polarization, voltage standing wave ratio and antenna patterns. Experience with spreadsheet tools like excel and use of these tools to normalize and plot data. Experience executing testing and documenting using a detailed test procedure. Experience troubleshooting and implementing error proofing steps for RF test set ups. Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level:  Hourly/Non-Exempt Business Unit:  ESS4400 SPACE Relocation Available:  No Career Area:  Technicians Clearance Level:  Secret Type:  Full-Time Virtual Location:  no Work Schedule:  9x80A-9,9,9,9,8 hrs/d in wk1, /9,9,9,9,off in wk2 Shift:  First       James
Lockheed Martin Palmdale, CA, USA
Jan 07, 2020
Full time
JOB ID:  513276BR Date posted:  Jan. 06, 2020 City:  Palmdale State:  California Description: PERFORMS SUCH TYPICAL DISTINGUISHING DUTIES AS: Fabricates and assembles details for all types of tooling such as jigs, fixtures, tools and dies, including pierce, blank and form dies, all standard and related tooling, standard power brake punches and dies, form blocks, plastic and wood tools, working in close conjunction with more highly –skilled tooling personnel; scribes lines for contour and hole location layouts from such references as tooling templates; prepares rough tooling stock for final finishing; trims laminated fiberglass tools; performs gating operations preparatory to casting plastic nests and faces for plastic forming tools; installs new or replaces worn or damaged bushings; mixes, prepares and applies plaster to pattern frames; makes splash frames for forming operations and takes less complex types of plaster splashes; clamps structural components for welding and locates tooling reference points on jig structures, tools and dies after methods and sequences have been determined by others; sets up and operates such equipment as drill presses, arbor presses, power shears, power saws, band files, radial drill presses, pedestal and disc grinders, and other power tools to perform such operations as grinding to form and maintain cutters, sanding, drilling, reaming, tapping, spot facing, counterboring, sawing and filing, where it is required to interpret and work from blueprints, tooling drawings and sketches, using machinist hand tools and precision measuring instruments, and exercising a knowledge of cutting characteristics of metals, feeds and speeds of machines and of related machine shop practices and procedures, including shop mathematics. Fabricates, assembles, and reworks multiple operation router blocks and/or multiple operation hand and hydropress forming blocks and accessories, when required tooling and information are available. Lays out flat and simple templates using empirical bend allowance formulae. Makes templates from flat layout masters; makes sample parts from extruded or standard formed materials where pickup and/or interpretation of information from plaster patterns; fabricates individual countour templates for use in box template setups. TOOL MAKER - WORKER (Continued) PERFORMS SUCH TYPICAL DISTINGUISHING DUTIES AS: May require certifications. Utilizes Blueprint Reading and Practical Shop Math or equivalent. Performs modification and rework of the level of difficulty of the operations described above. Must possess a minimum of one year of experience operating machine tools. PERFORMS SUCH RELATED DUTIES AS: Fabricates shims, spacers, clamps, jig base and locator pads, ribs and other structural components. Prepares rough die stock, pipe, bar, plate and tubular stock for layout, machining, painting or inspection. Moves, positions and helps others in handling, moving and positioning parts, dies, tools, equipment, fixtures and heavy materials as assigned; assists others in braking down setups, and returns tools and fixtures to proper sources; lays out and finishes simple templates such as individual trim, drill and bend templates, working from established references and blueprints, duplicates all types of individual templates from master layouts; cuts, fits, punches, shears and repairs templates as required; operates such machinery as saws, routers drill presses, shears, pedestal and disc grinders to perform such routine operations such as trimming, burring, sanding and drilling; performs assembly of tooling. Paints and properly identifies and codes tooling. Improvises shop aids to facilitate completion of work assignments. Performs disassembly and cleaning of tooling. Checks tools for wear, damage, etc., and replaces defective or worn components such as bushings, shims, clamps and pins, and reassembles same. Helps to maintain work area and machinery in a clean and orderly condition. HourlyProductionOperations Basic Qualifications: One year of experience operating machine tools. Experience reading Blueprints and using Practical Shop Math or equivalent. Experience with hand tools and standard Shop Machinery. MUST BE ABLE TO WORK ANY SHIFT. Desired Skills: Fabricates and assembles details for all types of tooling such as jigs, fixtures, tools and dies. Lays out flat and simple templates. Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level:  Hourly/Non-Exempt Business Unit:  ESS0343 AERONAUTICS COMPANY Relocation Available:  Yes Career Area:  Manufacturing Clearance Level:  Secret Type:  Full-Time Virtual Location:  no Work Schedule:  9x80A-9,9,9,9,8 hrs/d in wk1, /9,9,9,9,off in wk2 Shift:  First       James
Lockheed Martin Sunnyvale, CA, USA
Jan 07, 2020
Full time
JOB ID:  514272BR Date posted:  Jan. 07, 2020 City:  Sunnyvale State:  California Description: IAM Hourly represented employees who currently work at the main (Sunnyvale/Palo Alto) unit, Santa Cruz, VAFB or Eastern Range facilities must apply to open requisitions on Brass Ring to be considered for the position. Determine tasks to be performed, working from blueprints, specifications, schedules,test procedures, and similar authorized documents, plan work methods and sequences and apply mechanical skills and knowledge in performance of duties such as the following: Perform preventive maintenance following prescribed schedules and procedures; operationally check and correct mechanical units; remove and repair and/or replace parts and assemblies; check pressurization of nitrogen or other gas containers and replace as necessary; perform similar duties set forth in preventive maintenance schedules and procedures. Repair equipment which has been in service by removing, repairing and/or replacing structural, mechanical or electrical items; diagnose trouble and make operational tests and pressure or vacuum checks as necessary. Rework equipment in accordance with design change and related authorized documents. Fabricate details for and assemble items required to perform repair and maintenance assignments. May use machine tools as an aid in the performance of other requirements of the occupation. Operationally check items assembled, installed or repaired as required. Monitor fluid and gas systems of flight vehicles while in storage to assure maintenance of proper pressurization level by visually checking for fluid leakage and by checking fluid and gas gauges for loss of pressure. Circulate fluid through specified units at prescribed intervals; obtain samples of fluids and gases for contamination check. Repair or replace defective items. Remove parts and/or assemblies from flight vehicles in storage as required. Prepare and maintain paperwork related to the foregoing duties. Work from information such as vehicle handling, storage, loading and shipping test procedures, preventive maintenance instructions, blueprints, plumbing charts, engineering drawings, manufacturers manuals, oral and written information. Assist mechanics in other fields of specialization as required; perform electromechanical operations. Perform functions such as fabrication, installation, modification and testing of vehicle equipment utilizing the above skills in mechanics, hydraulics, and pneumatics in support of vehicle preparation and functional tests including vehicle alignments utilizing optical/laser equipment. Basic Qualifications: Knowledge of and ability to perform assembly and installation shop operations typical of final assembly, encompassing electrical and mechanical installation and structural assembly. Ability to perform vehicle alignments using optics including lasers. Ability to read and interpret engineering drawings to obtain information pertinent to the duties of the job. Ability to read and understand standard specifications, procedures, instructions and similar instructional and procedural documents such as mentioned above. Ability to operate machine tools such as lathe and mill preferably as a prerequisite, but may be acquired on the job. Desired Skills: Equipment installation, test equipment programming, electronic wiring schematic reading, ability to move large equipment over the road Class A license preferred. Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level:  Hourly/Non-Exempt Business Unit:  ESS4400 SPACE Relocation Available:  No Career Area:  Technicians Clearance Level:  None Type:  Full-Time Virtual Location:  no Work Schedule:  STANDARD-Mon-Fri/8 hours a day Shift:  First       James
Lockheed Martin Palmdale, CA, USA
Jan 07, 2020
Full time
JOB ID:  512986BR Date posted:  Jan. 07, 2020 City:  Palmdale State:  California Description: Selected individual will become part of the Shop Floor Control team in Palmdale. Candidate will join a select group of individuals who are responsible for providing Production Control support to one or more Palmdale programs. Will utilize MRP (Material Resource Planning), preferably SAP and the Palmdale order location system (SFM). To review and adjust shop schedules. Will coordinate and balance multiple sources of demands along with coordinating capacity planning constraint resolution and incorporating corresponding resolution into SAP. Will forecast supply-demand mismatches; communicate up and down supply chain to support demands/supply matching. Will attend/chair status meetings advising management of the status of work in progress, material availability, and potential production problems to ensure that personnel, equipment, materials, and services are provided as needed. Must have the ability to resolve issues that may arise in the manufacturing process by interfacing with all supporting organizations. Develop solutions to complex problems which require the regular use of ingenuity and innovation. **Must be a US Citizen ** Must be a US Citizen. This position is located at a facility that requires special access. Must have the ability to obtain a secret level clearance after hire. Basic Qualifications: Experience with Tool Crib procedures and Inventory Management Experience with CribMaster or other similar software Experience using Microsoft Office Suite Desired Skills: Experience with Tool Crib/Warehouse Procedures, FOD Control procedures, Inventory Management, SAP and Production Control Experience with Purchase Cards Experience with suppliers and vendors Experience with Systems Applications & Products (SAP) and Warehouse procedures Experience in the set up of Consolidated Tool Kits (CTKs) and Automated Dispensing Units (ADUs) Experience working in a Union environment Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level:  Experienced Professional Business Unit:  ESS0343 AERONAUTICS COMPANY Relocation Available:  Possible Career Area:  Manufacturing Clearance Level:  Secret Type:  Full-Time Virtual Location:  no Work Schedule:  4X10A- 4 10 hr days Mon-Thurs; Fr/Sa/Su off Shift:  First       James
Lockheed Martin Palmdale, CA, USA
Jan 07, 2020
Full time
JOB ID:  511729BR Date posted:  Jan. 07, 2020 City:  Palmdale State:  California Description: As part of the program management team, the program operations manager will work directly with the program director and deputy program manager to help drive program execution including major program milestones. Responsible for program tactical planning, aligned to the program and portfolio strategy, as well as management and oversight of program logistics planning. Responsible for ensuring all resources are planned, purchased, transported, installed, and made ready at the test location, as well as daily coordination with major IPTs (Chief Engineer, Flight Test, Air Vehicle, Systems, and Avionics). Acts as Program Management Control Account Manager. Forecasts and plans all program operations activities including information technology (IT), Capital and Overhead, in addition to and planning and execution of Program New Business Funds (NBFs) Management (Independent Research & Development (IR&D), Marketing Assist (MA)) The candidate will be required to work with the existing program management team to overcome both technical and programmatic challenges. The candidate will work independently in the execution of program objectives with little or no supervision with the only feedback being the evaluation of the effectiveness of results obtained. The candidate is required to have extensive experience and confidence as erroneous decisions, or recommendations will have a long-term negative effect on ADP's reputation and future business, including ADP’s financial posture. The candidate shall review program financial performance data to identify trends, accuracy, and necessary improvements and/or enhancements. It is expected that in this role the ideal candidate shall use advanced concepts and techniques determining the appropriate program improvements and enhancements, such as EVMS and EVMS light, and complete excel pivot tables. The ideal candidate will be self-starter, be able to quickly assess situations and quickly derive innovative solutions to problems, have the ability to work independently, and be able to “look and plan ahead” to anticipate upcoming initiatives / tasks both within the program and at the enterprise level. The ideal candidate will have an outstanding foundation in engineering with a broad general knowledge of aircraft development, integration, and test. They should be an excellent communicator and have outstanding organization skills. Previous experience in working within a program office, especially involving complex airborne weapon systems considered a plus. Basic Qualifications: Experience in Earned Value Management & Systems Engineering Aircraft development from initial design to fabrication and flight test Proficient in MS Office Bachelor's degree or higher education Prior experience working with United States Government (USG) Customers Desired Skills: Excellent in Multi-tasking and an excellent communicator. Experienced Cost Account Manager of multiple Cost Accounts. Experience conducting aircraft special technology testing. Program Management CAT 1 or higher. Experience working within a program office. Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level:  Experienced Professional Business Unit:  ESS0343 AERONAUTICS COMPANY Relocation Available:  Possible Career Area:  Program Management Clearance Level:  Top Secret with an investigation within 5 years Type:  Full-Time Virtual Location:  no Work Schedule:  4X10A- 4 10 hr days Mon-Thurs; Fr/Sa/Su off Shift:  First       James