4 jobs found in Redding

Duties: Maintains schedules and flow of equipment between users and the contract service provider. Serves as the Forest Service employee liaison to secure service, repairs, parts and modifications to WCF and project owned equipment. The equipment may range from heavy duty, diesel powered construction/earth moving equipment and fire engines to sedans and light trucks. The incumbent will personally provide detailed instruction approving job orders for work to be completed and inspecting finished product.   Reviews and performs inspections (pre-work, in process and completed work) of all forest owned equipment which is repaired by the service provider to insure safety, cost effectiveness and contract compliance. Incumbent will also perform inspections, as required, on equipment not included within the scope of maintenance contracts. Operates fleets of vehicles and equipment during inspections. Performs routine and unscheduled inspections to ensure that service provider is performing the services requested. Coordinates with forest fleet managers to insure upkeep of equipment history folders.   Receives and reviews completed work orders from the service provider. Incumbent reviews work orders for accuracy and insures costs are within parameters for the repair. Forwards copies of the work orders to the COR and Forest Fleet Manager. In coordination with the COR, reviews service provider invoices against job orders, identifies proper job codes for work performed and recommends payment.   Reviews operator Preventive Maintenance documents for any listed mechanical deficiencies. Coordinates scheduling of repairs between operator and contract service provider creating job orders for work to be completed. Files documents in appropriate locations. Reviews operator logbook for recorded maintenance compliance.   Diagnosis vehicle recall and warranty issues and coordinates repairs with dealer or service provider for warranty compliance. Assesses and documents recurring manufacturers defects and coordinates with manufacturers to resolve issues.   Coordinates the delivery/pickup of vehicles to service provider for fluid checks and initial service modifications.   Serves as contact between the Forest Service and contract service provider to secure services in support of incidents. Approves work orders, inspects completed repairs and receives and reviews required reports for completeness and accuracy, forwarding all documentation to proper individuals and units.   Attends and participates in Government Auctions, assists auctioneer, starts vehicles and assist buyers with removal of equipment. Assists potential bidders (walk-in and telephone) during sale preview by providing information on vehicles and equipment.   Upon obtaining information from the service provider, etc. the incumbent will make reports and recommendations to Forest Fleet Manager on any misuse or abuse of forest assigned equipment. This includes inspection of the equipment, research of the condition under which used and any other pertinent factors. Incumbent has the authority to direct discontinued use of the equipment in the interest of safety (red tagged equipment).   Receives required mechanical assessment reports for holdovers, excess equipment and equipment for disposal from the service provider. Incumbent will review for completion and forward the reports to the proper forest fleet manager.   Responsible to ensure service provider meets all conditions of the contract including all safety, OSHA, EPA and other local, state or federal laws and regulations. Incumbent will report any deficiencies to the COR.   CDL REQUIRED Operates vehicles in engineering equipment requiring the incumbent to obtain and hold it California Class A Commercial Driver's License (CDL). This license must be obtained prior to operating vehicles and equipment requiring a CDL. This position is a Test Designated Position (TDP) under the Forest Service/Department of Transportation (DOT) Alcohol and Controlled Substances Testing Program. This portion of the position description is designated as Safety Sensitive. Driver is subject to the requirements of the Department of Transportation drug and alcohol testing program.             Gary Munson Robert McGowan  530-949-0847 email at rdmcgowan@usda.gov https://fsoutreach.gdcii.com/Outreach/OpenAttachment/?guid=80A6837A0CC5496AB7ADC56F90EFA44B    

Vacancy Questions Preview Grade: 00 No questions specified. Grade: All Grades 1 Select the response that best describes your level of experience, education, or training in troubleshooting and diagnosing technical problems of electronic/electrical equipment installed in a hydroelectric powerplant, large steam or nuclear powerplant. Answer to this question is required I have not had education, training or experience in this task. I have completed education or training in this task, but have not yet applied this education or training on the job. I have journeyman-level experience in performing these tasks on the job. My work was monitored closely by a supervisor or senior journeyman employee to ensure compliance with proper procedures. I have journeyman-level experience in performing these tasks and have performed these tasks as a regular part of my job. I have performed these tasks independently and normally without review by a supervisor or senior journeyman employee. I have journeyman-level experience performing these tasks, which were a central or a major part of my job. I have routinely performed and have trained others in the performance of these tasks and/or others have consulted me as an expert for assistance in performing these tasks. 2 Select the response that best describes the type of powerplant facility you have worked in within the last three years. Answer to this question is required Hydroelectric Diesel Gas Steam Nuclear Other None of the above 3 Select the response that best reflects how you obtained your skills as a C&I mechanic. Answer to this question is required I have recent work experience performing routine trades/crafts tasks that required me to use standard techniques to maintain and make minor repairs to electronic equipment and power control systems, such as meters, relays, voltage regulators, governors, solid state devices, wireless communication systems, SCADA systems, etc. I successfully completed at least a year of college or vocational technical school (30 semester units or equivalent) with courses in mathematics, engineering, electronics technology, science, or industrial technology (mechanics, machine trades, physics). I successfully completed an associate's degree from an accredited college in electronics system technology, engineering, communication engineering, mechtronics, or closely related curriculum that included courses on electrical/electronic theoretical principles, control systems, circuitry, instrumentation, etc. I successfully completed a technical degree program from an accredited vocational technical school (two year program or 60 semester units or equivalent) in electronics technology, control systems, communication engineering or closely related curriculum that included courses on electrical/electronic theoretical principles and practical workshop experience in instrumentation, circuitry, programmable logic controllers, digital communications, etc. I successfully completed a bachelor's degree from an accredited college or university in engineering, electronics, control systems, communication engineering, or closely related curriculum that included courses on electrical/electronic theoretical principles, digital and wireless communications, instrumentation, circuitry, programmable logic controllers, etc. I successfully completed an employer or military sponsored electrical/electronic training program comprised of progressively increased levels of practical and theoretical complexity. The program included on-the-job training, formal instruction or correspondence coursework that developed my skills in installing, overhauling and maintaining a variety of electronic equipment associated with protective relays, computer control systems, communication systems, and integrated electronic systems. I successfully completed a formal apprentice program (approx. 8000 hours) recognized by the Department of Labor for C&I mechanic, electronics mechanic, electronics integrated systems mechanic or a closely related occupation. The program included on-the-job training, formal instruction or coursework at progressively increased levels of practical and theoretical complexity that developed my skills in installing, overhauling and maintaining electronic and communications equipment and systems. I acquired C&I mechanic skills through extensive on-the-job training in a shop or industrial environment where I learned to install, troubleshoot, overhaul and maintain a variety of complete operational electronic equipment and power control systems. My assignments progressively increased in difficulty, requiring me to understand electronic theory and gain new or more advanced skills to maintain, repair and replace electronic equipment, specialized circuitry, and integrated systems. None of the above. 4 Select the certification(s) for industrial instrumentation you possess. Answer to this question is required NICET Level III-IV NICET Level I-II ISA CCST Level I-II ISA CCST Level III Automation Protocol Certification (e.g., HART, Fieldbus, Profibus) Equipment Manufacturer Certification (e.g., Foxboro, Fisher, Rosemount, Honeywell) None of the above 5 Select the computer software programs you routinely use to accomplish your work. Answer to this question is required Doble Test Programs (any version) SEL Protective Relay Test Programs (any version) AVO Protective Relay Test Programs (any version) AVTS Protective Relay Test Programs (e.g., RTS, Pulse Master, Protest, Omichron, Manta) Documenting Instrumentation Calibration Programs (e.g., AMS, DPC, TransCal, Cornerstone) None of the above 6 Select the response that best reflects your experience using computerized relay test equipment. Answer to this question is required I have not had education, training or experience in performing this task. I have completed formal education or training in performing this task but have not yet performed it on the job. I have performed this task on the job under close supervision by a supervisor manager or senior employee to ensure compliance with correct procedures. I have performed this task as a regular part of a job, independently and usually without review by a supervisor, manager or senior employee. This task has been a central or major part of my work. I have performed it myself routinely, and I have trained others in performance of this task and/or others have consulted me as an expert for assistance in performing this task. 7 Select the electrical test equipment you have operated or used in a powerplant or commercial/industrial work environment. Answer to this question is required Voltmeter. Recording voltmeters. Ammeters. Ohmmeters. Clamp-on ammeters. Potentiometers. Frequency meters. Phase sequence testers. Infrared gun or camera. Megger. Doble. AC and DC High Potential (Hi-Pot) test equipment. High current test set. Resistance bridges. Oscilloscopes. Oscillographs. Wheatstone-bridge. Time-travel analyzer. VAR meter. Wattmeter. Signal generator. Fiber optical test equipment (fault locating, certification, losses, etc.) Frequency counters. Microwave link analyzer. Insulation tester. Logic analyzer. Phase shifter. Spectrum analyzer. Phase angle meter. Protective relaying test set. Data breakout box. RF frequency generator. Transducer (MLA). PC diagnostic equipment. Transmission impairment measuring set. Protocol analyzer. RF monitors. Signal tracers. Data analyzers. Wattmeter RF. Process meter (pressure, temp, ma, etc.) CT/PT tester. Chart recorders (e.g. strip recorders, etc.). None of the above. 8 Select the instrument calibration equipment you have used to accomplish your work. Answer to this question is required Deadweight Tester Documenting Process Calibrator Dry Block Loop Calibrator Decade Box Voltage/Current Source Pressure Calibrator Thermocouple/RTD Calibrator None of the above 9 Select the response that best reflects your experience programming and testing programmable logic controllers (PLCs). Answer to this question is required I have not had education, training or experience in performing this task. I have completed formal education or training in performing this task but have not yet performed it on the job. I have performed this task on the job under close supervision by a supervisor manager or senior employee to ensure compliance with correct procedures. I have performed this task as a regular part of a job, independently and usually without review by a supervisor, manager or senior employee. This task has been a central or major part of my work. I have performed it myself routinely, and I have trained others in performance of this task and/or others have consulted me as an expert for assistance in performing this task. 10 Select not more than three (3) of the following tasks that represent your strongest capabilities. Answer to this question is required Calibration and maintenance of metering equipment. Maintaining and testing battery chargers and systems. Wiring electrical circuits. Calibrate and test watt hour meters. Repairing governors (solid state or digital). Troubleshooting electrical control circuits. Programming and troubleshooting programmable logic controllers (PLC's). Testing instrument transformers and related circuits (polarity, ratio, burden, etc.). Repair office equipment (faxes, copiers, etc.). Troubleshooting voltage regulators. Installation of new equipment or systems. None of the above. 11 Select the response that best describes your highest level of skill in troubleshooting electronic equipment problems with instruments in a multi-unit system or particular subsystem. Answer to this question is required I have some experience with simple troubleshooting but would need help or close supervision. I have experience troubleshooting simple problems with normal supervision. I have experience troubleshooting to diagnose routine common and simple problems with normal or minimal supervision. I have experience troubleshooting to diagnose complex problems and perform complex tasks in a commercial/industrial environment with minimal supervision. I have experience troubleshooting to diagnose complex problems and perform complex tasks with minimal or no supervision in a hydroelectric, nuclear, or steam powerplant. None of the above 12 Select the response that best reflects your experience installing, troubleshooting, overhauling and maintaining voice and data communication equipment, such as VHF, UHF, fiber optic, and/or microwave radios. Answer to this question is required I have not had education, training or experience in performing this task. I have completed formal education or training in performing this task but have not yet performed it on the job. I have performed this task on the job under close supervision by a supervisor manager or senior employee to ensure compliance with correct procedures. I have performed this task as a regular part of a job, independently and usually without review by a supervisor, manager or senior employee. This task has been a central or major part of my work. I have performed it myself routinely, and I have trained others in performance of this task and/or others have consulted me as an expert for assistance in performing this task. 13 Select the response that best reflects your experience installing, overhauling and maintaining supervisory control and data acquisitions (SCADA) and telemetry equipment. Answer to this question is required I have not had education, training or experience in performing this task. I have completed formal education or training in performing this task but have not yet performed it on the job. I have performed this task on the job under close supervision by a supervisor manager or senior employee to ensure compliance with correct procedures. I have performed this task as a regular part of a job, independently and usually without review by a supervisor, manager or senior employee. This task has been a central or major part of my work. I have performed it myself routinely, and I have trained others in performance of this task and/or others have consulted me as an expert for assistance in performing this task. 14 Select the electrical and electronic equipment you have diagnosed and repaired in a powerplant or commercial/industrial work environment. Answer to this question is required Solid state (digital) exciters. Electro-mechanical exciters. Solid state elevator controls. Electro-mechanical elevator controls. Alarm systems (Annunciator boards and controls). Generator controls. Generator protection. Electrical control circuits in powerplants. Electrical control circuits in pumping plants. Electrical control circuits in switchyards. Power transformers (10,000 KVA or larger). Transformers (less than 10,000 KVA) Circuit breakers (greater than 100 KV). Circuit breakers (less than 100 KV but greater than 1.0 KV). Circuit breakers (less than 1.0 KV). Power disconnect switches. Residential lighting switches. Motor disconnect switches. DC switches. Telephone switches and equipment. Electro-mechanical governors. Digital governors. AC motors. DC motors. Solenoid valves. Motor controllers. Metering equipment. Motor operated valves. Synchronizing equipment. Refrigeration equipment. Rectifiers. Programmable logic control (PLC) equipment. Remote terminal unit (RTU) equipment. Sonic liquid devices. Communications cable. Capacitors. Inductors. Fiber optical cable. Potential transformers. Current transformers. SCADA equipment. Fire protection and suppression systems. DC battery systems (including charging equipment). AC UPS systems. None of the above. 15 Select the response that best describes your highest level of experience, education or training in reading and interpreting manufacturer's instructions to maintain and repair electronic equipment associated with a hydroelectric powerplant facility, large steam or nuclear powerplant, or commercial/industrial communications environment. Answer to this question is required I have not performed these job functions. I have received post high school education or formal training in these functions, but I have not performed them on the job. I have read and interpreted manufacturer's instructions to maintain and repair electrical equipment in an industrial maintenance facility. I have read and interpreted manufacturer's instructions to maintain and repair electronic equipment. I have read and interpreted manufacturer's instructions to maintain and repair electronic equipment. I am highly skilled at performing these functions. I have performed them independently and routinely. 16 Select the electrical drawings you have used to maintain and repair electrical equipment associated with a powerplant facility. Answer to this question is required Detailed wiring diagrams. Detailed schematic diagrams. Manufacturer's drawings and instructions. Electrical control diagrams. Detailed block diagrams for circuit analysis. Simple wiring diagrams. Simple block diagrams. Single line diagrams. 3-Line diagrams. Ladder logic diagrams. Step-by-step manufacturer's instructions. None of the above. 17 Select the response that best describes your highest level of skill using electrical and electronic schematic drawings specific to hydroelectric powerplant systems. Answer to this question is required I have used schematic drawings but would need help interpreting them or close supervision. I have used schematic drawings to perform common and simple tasks with normal supervision. I have used schematic drawings to diagnose routine common and simple tasks with normal or minimal supervision. I have used schematic drawings to diagnose complex problems and perform complex tasks with minimal supervision. I have used schematic drawings to diagnose complex problems and perform complex tasks with minimal or no supervision and have used these diagrams to instruct others. None of the above. 18 I am familiar with and have performed job duties under the guidelines of the U.S. Bureau of Reclamation's Facilities, Instructions, Standards, and Techniques (FIST), Volume 1-1 (Hazardous Energy Control Program) Manual or equivalent OSHA lockout/tagout (LOTO) regulations. Answer to this question is required Yes No 19 Select the response that defines how many at-fault accidents (personal injury to self or others, or property damage) you have had at work in the past ten years. Answer to this question is required No more than one (1). No more than two (2). More than two but less than six (6). Six or more (but less than ten (10)). Ten (10) or more. I have never had an at-fault accident at work. 20 I have performed electrical maintenance on equipment at heights exceeding 60 feet. Answer to this question is required Yes No 21 Are you physically able to perform work involving confined space entry and working in confined quarters? Answer to this question is required Yes No 22 Are you physically able to lift items weighing up to 50 pounds on a regular basis? Answer to this question is required Yes No 23 This position may require considerable physical effort in walking, climbing, stooping, and bending; work in temperatures that fluctuate from extreme cold to extreme heat, and in wet and or windy conditions. Are you able to work under these conditions? Answer to this question is required Yes No 24 Have you received an employee performance appraisal rating in the previous 12 months? Yes No 25 Indicate who officially rated your performance (e.g., immediate supervisor, 2nd level supervisor, acting supervisor, etc.). Also, indicate your rating in terms of the performance system (e.g., 3 level rating out of a 5-tier system; 2 level rating out of a 3-tier system; Pass rating out of a Pass/Fail system). Maximum length of 250 characters. 26 In the last three years, have you been recognized for your performance, accomplishments, and/or contributions at work? Yes No     Gary Munson Celeste Swanson, cbswanson@usbr.gov  

Vacancy Questions Preview Grade: 07 No questions specified. Grade: All Grades 1 Select the response that describes your experience performing warehouse duties without more than normal supervision. Your response below must be fully supported in your resume or you will not receive consideration for this job. Answer to this question is required I have not had education, training or experience in performing warehouse duties. I have completed formal education or training in performing warehouse duties but have not yet performed them on the job. I have performed warehouse duties on the job under direct supervision by a supervisor, manager, or senior employee to ensure compliance with correct procedures. I have performed warehouse duties as a regular part of a job, under general supervision by a supervisor, manager, or senior employee. Warehouse duties have been a central or major part of my work. I have performed them myself routinely, and I have trained others in the performance of warehouse duties, and/or others have consulted me as an expert for assistance in performing warehouse duties. 2 Which computer programs have you used proficiently to order supplies and equipment and/or monitor supply and equipment activities? Answer to this question is required Inventory Management System Financial Business Management System Word processing program Microsoft Excel Other spreadsheet program None of the above 3 Select the response which best reflects your highest level of experience in verifying receipt of items using packing and/or shipping lists to ensure all items were received. Answer to this question is required I have not had education, training or experience in performing this task. I have completed formal education or training in performing this task but have not yet performed it on the job. I have performed this task on the job under close supervision by a supervisor manager or senior employee to ensure compliance with correct procedures. I have performed this task as a regular part of a job, independently and usually without review by a supervisor, manager or senior employee. This task has been a central or major part of my work. I have performed it myself routinely, and I have trained others in performance of this task and/or others have consulted me as an expert for assistance in performing this task. 4 Which types of supplies or inventories have you been responsible for maintaining and/or managing? Answer to this question is required Mechanical parts Electronic parts Housekeeping supplies Office supplies Laboratory supplies Special clothing Educational materials Food service supplies Ground maintenance supplies Construction supplies Automotive equipment Personal protective equipment (safety) None of the above 5 Select the responses which describe the types of data you have maintained on a computer database. Answer to this question is required Property data Maintenance schedules Supply inventory Vendor database Vehicle records (mileage, usage (utilization), maintenance costs, fuel, etc) Purchase order logs Purchase order data Other None of the above 6 Select the response which best reflects your highest level of experience in cataloging items for a warehouse operation. Answer to this question is required I have not had education, training or experience in performing this task. I have completed formal education or training in performing this task but have not yet performed it on the job. I have performed this task on the job under close supervision by a supervisor manager or senior employee to ensure compliance with correct procedures. I have performed this task as a regular part of a job, independently and usually without review by a supervisor, manager or senior employee. This task has been a central or major part of my work. I have performed it myself routinely, and I have trained others in performance of this task and/or others have consulted me as an expert for assistance in performing this task. 7 Select the response which best reflects your highest level of experience in working with others to reconcile discrepancies in shipments or damaged goods received in order to devise an agreeable resolution. Answer to this question is required I have not had education, training or experience in performing this task. I have completed formal education or training in performing this task but have not yet performed it on the job. I have performed this task on the job under close supervision by a supervisor manager or senior employee to ensure compliance with correct procedures. I have performed this task as a regular part of a job, independently and usually without review by a supervisor, manager or senior employee. This task has been a central or major part of my work. I have performed it myself routinely, and I have trained others in performance of this task and/or others have consulted me as an expert for assistance in performing this task. 8 Select the responses that describe the types of problems you have handled on a regular basis. Answer to this question is required Resolve and reconcile shortages or overages in inventories Identify missing information Check information and documents for accuracy Resolve shipping discrepancies Investigate and document property damage issues Investigate property losses Resolve building maintenance issues Resolve vehicle maintenance problems Other None of the above 9 Select the response which best reflects your highest level of experience in working with others to reconcile discrepancies in inventory records. Answer to this question is required Compare reports with actual inventory to identify discrepancies Determine steps required to resolve discrepancies Initiate action to resolve discrepancies Monitor and track resolution of discrepancies None of the above 10 Select the responses which describe the types of data/resources you have utilized in gathering information to catalog items for a warehouse operation. Answer to this question is required Catalogs Internet Schematics Drawings Technical or professional individuals Purchase documents Physical inspection/review of items Other None of the above 11 Select the responses which describe the inventory management/material control tasks you have been responsible for on a regular basis. Answer to this question is required Oversee and maintain stock Catalog development/management Conduct physical inventories Respond to inventory requests Shipping and distribution of items Receive packing lists for receipt verification Screen packing lists for receipt verification Complete receiving reports None of the above 12 Select the responses which indicate the supply management functions you have performed on a regular and recurring basis. Answer to this question is required Issuing supplies Ordering supplies Receiving supplies Shipping supplies Storing supplies in a supply room Storing supplies in a warehouse-type facility Cataloging supplies Accounting for supplies Bookkeeping Reconciling records Replenishing supplies in a supply cabinet Contacting supply companies Determining stock levels Determining items to stock Monitoring turnover and use Upkeep and organization of supply storage locations None of the above 13 Select the responses that describe the types of guides/specifications you have used and interpreted for stock control within the work environment. Answer to this question is required Manufacturer?s guides or catalogs Warehouse floor plans Material codes Stock catalogs Parts lists Technical manuals Oral instructions Hand or mechanical signals Written directions or work requests None of the above 14 Select the responses that describe the types of guidelines you have used on a regular basis to solve problems. Answer to this question is required Federal Property Management Regulations Code of Federal Regulations Department Manual FEDSTRIP Manual Federal Acquisition Regulations Federal Management Regulations Reclamation Manual Motor Vehicle Handbook Office instructions and/or policies Reclamation Enterprise Maintenance Management System (REMMS) Manual MAXIMO Manual Other None of the above 15 Have you had experience in the storage of equipment or supplies which are flammable or otherwise hazardous? Answer to this question is required Yes No 16 Select the responses that identify equipment you have used to store or withdraw supplies from bins, racks, or other storage places in a warehouse facility. Answer to this question is required Fork lifts Barrel, hand or electric pallet trucks Moving and lifting dollies Pick-up trucks/vans Jacks Stock-picking carts Metal strap cutters Strapping tools Stencils Electric power tools Hand tools (saws, hammers, pliers) None of the above 17 Do you have experience in operating a forklift or other material handling equipment? Answer to this question is required Yes No 18 Do you currently possess a valid driver’s license? Answer to this question is required Yes No 19 Provide your driver’s license number, state in which issued, and expiration date of license. Maximum length of 250 characters. Answer to this question is required 20 Are you physically able to independently lift, carry, load and unload heavy objects items that weigh at least 40 pounds? Answer to this question is required Yes No       Gary Munson https://www.usajobs.gov/GetJob/ViewDetails/522903100   Celeste B. Swanson cbswanson@usbr.gov