136 jobs found

Basic Functions: Assist the Maintenance Foreman to insure a safe, compliant and efficient operating fleet by helping with all daily fleet and maintenance activities. Recommend improvements to enhance the operational efficiency and safety of the equipment and department.   Principal Duties & Responsibilities: • Works with Maintenance Foreman to determine daily workload. • Performs daily routine and repair maintenance on heavy landfill equipment, garbage collection vehicles and satellite collection trucks. • Assists with maintaining all parts and materials inventory. • Communicates repair issues on a timely basis. • Complies with all maintenance shop policies and procedures. • Reports any unsafe conditions and or practices. • Ensures the cleanliness and good-working order of the maintenance shop and equipment. • Participates in safety training for the maintenance staff. • Updates and submits required reporting/paperwork to management in a timely manner. • Performs general maintenance of the company buildings. • Other special projects, implementations and tasks as assigned.   Core Competencies • Set high work standards and motivate others • Ability to communicate with management • Focus on safety, quality and details • Use technical and professional knowledge and acquired skills   Required and Preferred Qualifications (Skills, Education and Experience) • High School Diploma    • Minimum 3-years related maintenance experience   • Ability to pass a pre-employment drug screening • ASE Certifications a plus • California Brake Inspector certified a plus • 3-5 years hydraulic experience  • 3-5 years MIG and or stick welding   Natasha Glynn

Duties: Oversees the operation and maintenance of the developed and dispersed district recreation program (campgrounds, day-use areas, lookout rentals, and winter play areas) . Makes repairs, removes or replaces facilities, or closes areas of facilities when hazards cannot be promptly eliminated. Maintains District recreation facilities such as toilets, road closure gates, hand pumps, water systems, picnic tables, fire rings, barriers, dumpsters and other miscellaneous structures. Conducts inventory and removal of hazard trees within developed sites. Prepares annual updates of work needed and cost to bring site conditions and operation up to full standard. Manages infrastructure montoring and condition survey assessment through the INFRA database. Naturalizes sites where necessary in order to control use and prevent resource damage. Determines informational and regulatory signing needs for the unit including arranging for installation, and monitors for effectiveness. Helps to keep sign inventory current.   Serves as a California state certified water system operator to maintain public drinking water systems.   Serves as a liason to volunteers and campground hosts.   Conducts grooming and maintenance of the Tri-Forest Snowmobile trails. Serves as a California state certfied snowcat/groomer operator including maintaining and operating groomer, snowmobiles, equipment, and tools.   Participates with other resource personnel to develop long-range plans for managing recreation resources within developed and dispersed recreation sites on the unit. Identifies potential problems arising from changing use patterns and new activities and recommends strategies to deal with them.   Participates in the development of plans for recreation area maintenance, rehabilitation, reconstruction, and construction projects in accordance with program management objectives and policies. Prepares detailed project work plans and schedules, including required personnel, equipment, and supplies.   Assist in the implementation of recreation operation and maintenance plans for developed and dispersed recreation sites. Monitors the scope of the approved operating plans. Serves to gather, compile, and recommend improvements for developed and dispersed recreation sites on the unit.     Serves as Contracting Officer’s Representative (COR) determining to implement and oversee contracts. Works with contracting personnel to describe the job and develop specifications and bid packages. Serves as inspector and contracting officer's representative on service contracts ensuring work is completed properly.   The incumbent inspects recreation areas, areas of concentrated public use, and special use permits for compliance with the permit and management plans, public health regulations, and safety plans.   Serves as a certfied Collection Officer for recreation sites to collect fees and record collections.   Assists with performing compliance checks and inspections on existing permits under Special Use authorization. Assists with the enforcement of Off-Road-Vehicle (ORV) restrictions, including maintenance and posting of regulatory signs and enforcement of restrictions. Patrols district roads, trails, and/or waterways and ensure that use is in accordance with recreation plans and regulations.   Patrols management unit to collect use data, identify or correct unsafe conditions, answer visitor inquiries, prevent vandalism and other anti-social behavior, gather current information recreation opportunities. Takes appropriate action to enforce Federal Regulations and to protect life and property. Coordinates enforcement activities with local Forest Service law enforcement personnel.   Prepares job hazard analysis and conducts safety training for all projects. Strictly complies with and enforces the Forest Service Safety Code. Skill in the safe operation of hand and power tools to perform construction and maintenance duties and to train co-workers and volunteers in their use.           Gary Munson Becky Cooper  rrcooper@fs.fed.us https://fsoutreach.gdcii.com/Outreach/OpenAttachment/?guid=5CF3020561B34E01A29EABE9D4EFE034

Duties: Maintains schedules and flow of equipment between users and the contract service provider. Serves as the Forest Service employee liaison to secure service, repairs, parts and modifications to WCF and project owned equipment. The equipment may range from heavy duty, diesel powered construction/earth moving equipment and fire engines to sedans and light trucks. The incumbent will personally provide detailed instruction approving job orders for work to be completed and inspecting finished product.   Reviews and performs inspections (pre-work, in process and completed work) of all forest owned equipment which is repaired by the service provider to insure safety, cost effectiveness and contract compliance. Incumbent will also perform inspections, as required, on equipment not included within the scope of maintenance contracts. Operates fleets of vehicles and equipment during inspections. Performs routine and unscheduled inspections to ensure that service provider is performing the services requested. Coordinates with forest fleet managers to insure upkeep of equipment history folders.   Receives and reviews completed work orders from the service provider. Incumbent reviews work orders for accuracy and insures costs are within parameters for the repair. Forwards copies of the work orders to the COR and Forest Fleet Manager. In coordination with the COR, reviews service provider invoices against job orders, identifies proper job codes for work performed and recommends payment.   Reviews operator Preventive Maintenance documents for any listed mechanical deficiencies. Coordinates scheduling of repairs between operator and contract service provider creating job orders for work to be completed. Files documents in appropriate locations. Reviews operator logbook for recorded maintenance compliance.   Diagnosis vehicle recall and warranty issues and coordinates repairs with dealer or service provider for warranty compliance. Assesses and documents recurring manufacturers defects and coordinates with manufacturers to resolve issues.   Coordinates the delivery/pickup of vehicles to service provider for fluid checks and initial service modifications.   Serves as contact between the Forest Service and contract service provider to secure services in support of incidents. Approves work orders, inspects completed repairs and receives and reviews required reports for completeness and accuracy, forwarding all documentation to proper individuals and units.   Attends and participates in Government Auctions, assists auctioneer, starts vehicles and assist buyers with removal of equipment. Assists potential bidders (walk-in and telephone) during sale preview by providing information on vehicles and equipment.   Upon obtaining information from the service provider, etc. the incumbent will make reports and recommendations to Forest Fleet Manager on any misuse or abuse of forest assigned equipment. This includes inspection of the equipment, research of the condition under which used and any other pertinent factors. Incumbent has the authority to direct discontinued use of the equipment in the interest of safety (red tagged equipment).   Receives required mechanical assessment reports for holdovers, excess equipment and equipment for disposal from the service provider. Incumbent will review for completion and forward the reports to the proper forest fleet manager.   Responsible to ensure service provider meets all conditions of the contract including all safety, OSHA, EPA and other local, state or federal laws and regulations. Incumbent will report any deficiencies to the COR.   CDL REQUIRED Operates vehicles in engineering equipment requiring the incumbent to obtain and hold it California Class A Commercial Driver's License (CDL). This license must be obtained prior to operating vehicles and equipment requiring a CDL. This position is a Test Designated Position (TDP) under the Forest Service/Department of Transportation (DOT) Alcohol and Controlled Substances Testing Program. This portion of the position description is designated as Safety Sensitive. Driver is subject to the requirements of the Department of Transportation drug and alcohol testing program.             Gary Munson Robert McGowan  530-949-0847 email at rdmcgowan@usda.gov https://fsoutreach.gdcii.com/Outreach/OpenAttachment/?guid=80A6837A0CC5496AB7ADC56F90EFA44B    

Vacancy Questions Preview Grade: 00 No questions specified. Grade: All Grades 1 Select the response that best describes your level of experience, education, or training in troubleshooting and diagnosing technical problems of electronic/electrical equipment installed in a hydroelectric powerplant, large steam or nuclear powerplant. Answer to this question is required I have not had education, training or experience in this task. I have completed education or training in this task, but have not yet applied this education or training on the job. I have journeyman-level experience in performing these tasks on the job. My work was monitored closely by a supervisor or senior journeyman employee to ensure compliance with proper procedures. I have journeyman-level experience in performing these tasks and have performed these tasks as a regular part of my job. I have performed these tasks independently and normally without review by a supervisor or senior journeyman employee. I have journeyman-level experience performing these tasks, which were a central or a major part of my job. I have routinely performed and have trained others in the performance of these tasks and/or others have consulted me as an expert for assistance in performing these tasks. 2 Select the response that best describes the type of powerplant facility you have worked in within the last three years. Answer to this question is required Hydroelectric Diesel Gas Steam Nuclear Other None of the above 3 Select the response that best reflects how you obtained your skills as a C&I mechanic. Answer to this question is required I have recent work experience performing routine trades/crafts tasks that required me to use standard techniques to maintain and make minor repairs to electronic equipment and power control systems, such as meters, relays, voltage regulators, governors, solid state devices, wireless communication systems, SCADA systems, etc. I successfully completed at least a year of college or vocational technical school (30 semester units or equivalent) with courses in mathematics, engineering, electronics technology, science, or industrial technology (mechanics, machine trades, physics). I successfully completed an associate's degree from an accredited college in electronics system technology, engineering, communication engineering, mechtronics, or closely related curriculum that included courses on electrical/electronic theoretical principles, control systems, circuitry, instrumentation, etc. I successfully completed a technical degree program from an accredited vocational technical school (two year program or 60 semester units or equivalent) in electronics technology, control systems, communication engineering or closely related curriculum that included courses on electrical/electronic theoretical principles and practical workshop experience in instrumentation, circuitry, programmable logic controllers, digital communications, etc. I successfully completed a bachelor's degree from an accredited college or university in engineering, electronics, control systems, communication engineering, or closely related curriculum that included courses on electrical/electronic theoretical principles, digital and wireless communications, instrumentation, circuitry, programmable logic controllers, etc. I successfully completed an employer or military sponsored electrical/electronic training program comprised of progressively increased levels of practical and theoretical complexity. The program included on-the-job training, formal instruction or correspondence coursework that developed my skills in installing, overhauling and maintaining a variety of electronic equipment associated with protective relays, computer control systems, communication systems, and integrated electronic systems. I successfully completed a formal apprentice program (approx. 8000 hours) recognized by the Department of Labor for C&I mechanic, electronics mechanic, electronics integrated systems mechanic or a closely related occupation. The program included on-the-job training, formal instruction or coursework at progressively increased levels of practical and theoretical complexity that developed my skills in installing, overhauling and maintaining electronic and communications equipment and systems. I acquired C&I mechanic skills through extensive on-the-job training in a shop or industrial environment where I learned to install, troubleshoot, overhaul and maintain a variety of complete operational electronic equipment and power control systems. My assignments progressively increased in difficulty, requiring me to understand electronic theory and gain new or more advanced skills to maintain, repair and replace electronic equipment, specialized circuitry, and integrated systems. None of the above. 4 Select the certification(s) for industrial instrumentation you possess. Answer to this question is required NICET Level III-IV NICET Level I-II ISA CCST Level I-II ISA CCST Level III Automation Protocol Certification (e.g., HART, Fieldbus, Profibus) Equipment Manufacturer Certification (e.g., Foxboro, Fisher, Rosemount, Honeywell) None of the above 5 Select the computer software programs you routinely use to accomplish your work. Answer to this question is required Doble Test Programs (any version) SEL Protective Relay Test Programs (any version) AVO Protective Relay Test Programs (any version) AVTS Protective Relay Test Programs (e.g., RTS, Pulse Master, Protest, Omichron, Manta) Documenting Instrumentation Calibration Programs (e.g., AMS, DPC, TransCal, Cornerstone) None of the above 6 Select the response that best reflects your experience using computerized relay test equipment. Answer to this question is required I have not had education, training or experience in performing this task. I have completed formal education or training in performing this task but have not yet performed it on the job. I have performed this task on the job under close supervision by a supervisor manager or senior employee to ensure compliance with correct procedures. I have performed this task as a regular part of a job, independently and usually without review by a supervisor, manager or senior employee. This task has been a central or major part of my work. I have performed it myself routinely, and I have trained others in performance of this task and/or others have consulted me as an expert for assistance in performing this task. 7 Select the electrical test equipment you have operated or used in a powerplant or commercial/industrial work environment. Answer to this question is required Voltmeter. Recording voltmeters. Ammeters. Ohmmeters. Clamp-on ammeters. Potentiometers. Frequency meters. Phase sequence testers. Infrared gun or camera. Megger. Doble. AC and DC High Potential (Hi-Pot) test equipment. High current test set. Resistance bridges. Oscilloscopes. Oscillographs. Wheatstone-bridge. Time-travel analyzer. VAR meter. Wattmeter. Signal generator. Fiber optical test equipment (fault locating, certification, losses, etc.) Frequency counters. Microwave link analyzer. Insulation tester. Logic analyzer. Phase shifter. Spectrum analyzer. Phase angle meter. Protective relaying test set. Data breakout box. RF frequency generator. Transducer (MLA). PC diagnostic equipment. Transmission impairment measuring set. Protocol analyzer. RF monitors. Signal tracers. Data analyzers. Wattmeter RF. Process meter (pressure, temp, ma, etc.) CT/PT tester. Chart recorders (e.g. strip recorders, etc.). None of the above. 8 Select the instrument calibration equipment you have used to accomplish your work. Answer to this question is required Deadweight Tester Documenting Process Calibrator Dry Block Loop Calibrator Decade Box Voltage/Current Source Pressure Calibrator Thermocouple/RTD Calibrator None of the above 9 Select the response that best reflects your experience programming and testing programmable logic controllers (PLCs). Answer to this question is required I have not had education, training or experience in performing this task. I have completed formal education or training in performing this task but have not yet performed it on the job. I have performed this task on the job under close supervision by a supervisor manager or senior employee to ensure compliance with correct procedures. I have performed this task as a regular part of a job, independently and usually without review by a supervisor, manager or senior employee. This task has been a central or major part of my work. I have performed it myself routinely, and I have trained others in performance of this task and/or others have consulted me as an expert for assistance in performing this task. 10 Select not more than three (3) of the following tasks that represent your strongest capabilities. Answer to this question is required Calibration and maintenance of metering equipment. Maintaining and testing battery chargers and systems. Wiring electrical circuits. Calibrate and test watt hour meters. Repairing governors (solid state or digital). Troubleshooting electrical control circuits. Programming and troubleshooting programmable logic controllers (PLC's). Testing instrument transformers and related circuits (polarity, ratio, burden, etc.). Repair office equipment (faxes, copiers, etc.). Troubleshooting voltage regulators. Installation of new equipment or systems. None of the above. 11 Select the response that best describes your highest level of skill in troubleshooting electronic equipment problems with instruments in a multi-unit system or particular subsystem. Answer to this question is required I have some experience with simple troubleshooting but would need help or close supervision. I have experience troubleshooting simple problems with normal supervision. I have experience troubleshooting to diagnose routine common and simple problems with normal or minimal supervision. I have experience troubleshooting to diagnose complex problems and perform complex tasks in a commercial/industrial environment with minimal supervision. I have experience troubleshooting to diagnose complex problems and perform complex tasks with minimal or no supervision in a hydroelectric, nuclear, or steam powerplant. None of the above 12 Select the response that best reflects your experience installing, troubleshooting, overhauling and maintaining voice and data communication equipment, such as VHF, UHF, fiber optic, and/or microwave radios. Answer to this question is required I have not had education, training or experience in performing this task. I have completed formal education or training in performing this task but have not yet performed it on the job. I have performed this task on the job under close supervision by a supervisor manager or senior employee to ensure compliance with correct procedures. I have performed this task as a regular part of a job, independently and usually without review by a supervisor, manager or senior employee. This task has been a central or major part of my work. I have performed it myself routinely, and I have trained others in performance of this task and/or others have consulted me as an expert for assistance in performing this task. 13 Select the response that best reflects your experience installing, overhauling and maintaining supervisory control and data acquisitions (SCADA) and telemetry equipment. Answer to this question is required I have not had education, training or experience in performing this task. I have completed formal education or training in performing this task but have not yet performed it on the job. I have performed this task on the job under close supervision by a supervisor manager or senior employee to ensure compliance with correct procedures. I have performed this task as a regular part of a job, independently and usually without review by a supervisor, manager or senior employee. This task has been a central or major part of my work. I have performed it myself routinely, and I have trained others in performance of this task and/or others have consulted me as an expert for assistance in performing this task. 14 Select the electrical and electronic equipment you have diagnosed and repaired in a powerplant or commercial/industrial work environment. Answer to this question is required Solid state (digital) exciters. Electro-mechanical exciters. Solid state elevator controls. Electro-mechanical elevator controls. Alarm systems (Annunciator boards and controls). Generator controls. Generator protection. Electrical control circuits in powerplants. Electrical control circuits in pumping plants. Electrical control circuits in switchyards. Power transformers (10,000 KVA or larger). Transformers (less than 10,000 KVA) Circuit breakers (greater than 100 KV). Circuit breakers (less than 100 KV but greater than 1.0 KV). Circuit breakers (less than 1.0 KV). Power disconnect switches. Residential lighting switches. Motor disconnect switches. DC switches. Telephone switches and equipment. Electro-mechanical governors. Digital governors. AC motors. DC motors. Solenoid valves. Motor controllers. Metering equipment. Motor operated valves. Synchronizing equipment. Refrigeration equipment. Rectifiers. Programmable logic control (PLC) equipment. Remote terminal unit (RTU) equipment. Sonic liquid devices. Communications cable. Capacitors. Inductors. Fiber optical cable. Potential transformers. Current transformers. SCADA equipment. Fire protection and suppression systems. DC battery systems (including charging equipment). AC UPS systems. None of the above. 15 Select the response that best describes your highest level of experience, education or training in reading and interpreting manufacturer's instructions to maintain and repair electronic equipment associated with a hydroelectric powerplant facility, large steam or nuclear powerplant, or commercial/industrial communications environment. Answer to this question is required I have not performed these job functions. I have received post high school education or formal training in these functions, but I have not performed them on the job. I have read and interpreted manufacturer's instructions to maintain and repair electrical equipment in an industrial maintenance facility. I have read and interpreted manufacturer's instructions to maintain and repair electronic equipment. I have read and interpreted manufacturer's instructions to maintain and repair electronic equipment. I am highly skilled at performing these functions. I have performed them independently and routinely. 16 Select the electrical drawings you have used to maintain and repair electrical equipment associated with a powerplant facility. Answer to this question is required Detailed wiring diagrams. Detailed schematic diagrams. Manufacturer's drawings and instructions. Electrical control diagrams. Detailed block diagrams for circuit analysis. Simple wiring diagrams. Simple block diagrams. Single line diagrams. 3-Line diagrams. Ladder logic diagrams. Step-by-step manufacturer's instructions. None of the above. 17 Select the response that best describes your highest level of skill using electrical and electronic schematic drawings specific to hydroelectric powerplant systems. Answer to this question is required I have used schematic drawings but would need help interpreting them or close supervision. I have used schematic drawings to perform common and simple tasks with normal supervision. I have used schematic drawings to diagnose routine common and simple tasks with normal or minimal supervision. I have used schematic drawings to diagnose complex problems and perform complex tasks with minimal supervision. I have used schematic drawings to diagnose complex problems and perform complex tasks with minimal or no supervision and have used these diagrams to instruct others. None of the above. 18 I am familiar with and have performed job duties under the guidelines of the U.S. Bureau of Reclamation's Facilities, Instructions, Standards, and Techniques (FIST), Volume 1-1 (Hazardous Energy Control Program) Manual or equivalent OSHA lockout/tagout (LOTO) regulations. Answer to this question is required Yes No 19 Select the response that defines how many at-fault accidents (personal injury to self or others, or property damage) you have had at work in the past ten years. Answer to this question is required No more than one (1). No more than two (2). More than two but less than six (6). Six or more (but less than ten (10)). Ten (10) or more. I have never had an at-fault accident at work. 20 I have performed electrical maintenance on equipment at heights exceeding 60 feet. Answer to this question is required Yes No 21 Are you physically able to perform work involving confined space entry and working in confined quarters? Answer to this question is required Yes No 22 Are you physically able to lift items weighing up to 50 pounds on a regular basis? Answer to this question is required Yes No 23 This position may require considerable physical effort in walking, climbing, stooping, and bending; work in temperatures that fluctuate from extreme cold to extreme heat, and in wet and or windy conditions. Are you able to work under these conditions? Answer to this question is required Yes No 24 Have you received an employee performance appraisal rating in the previous 12 months? Yes No 25 Indicate who officially rated your performance (e.g., immediate supervisor, 2nd level supervisor, acting supervisor, etc.). Also, indicate your rating in terms of the performance system (e.g., 3 level rating out of a 5-tier system; 2 level rating out of a 3-tier system; Pass rating out of a Pass/Fail system). Maximum length of 250 characters. 26 In the last three years, have you been recognized for your performance, accomplishments, and/or contributions at work? Yes No     Gary Munson Celeste Swanson, cbswanson@usbr.gov  

Clearance Required: You must possess or be eligible to attain an Active Dept. of Energy Clearance, level L or Q is desired. A DoD Clearance, may be considered. Due to the location of the work, U.S. Citizenship is required.   The primary responsibilities of the PC Computer Moves Technician is to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability to be a Computer Moves Technician. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential. You will review the customers move request, confirm the customers moves requirements, and ensure the disconnect/reconnect of the computer equipment is completed as scheduled. You will disconnect customer’s computer prior the computer being moved to the customer’s new location. You will perform a site survey prior to reconnecting the customer’s computer. This will ensure the network box is active and the phone port is available for the phone move. You will reconnect customer’s computer after the computer equipment is moved to the new location. You will verify all computer peripherals are functioning and working to the customer’s satisfaction. You will appropriately document all Service Request tickets. You will update the network database with the new location. You will provide regular communication with customer regarding service request status. You will perform minor troubleshooting tasks if computer peripherals are not working. You will provide adequate notice for planned absences to ensure backup of queues and duties. You will consistently perform duties in keeping with regulations, policies, and procedures required for operating in high security environments. You will complete other technical duties as assigned.   Requirements, Education, & Experience You will possess a minimum of a High School diploma or G.E.D equivalent. You will have an Associate Degree in a relevant IT field (Information Technology, Computer Science, etc.) Equivalent experience/certifications will be considered in lieu of a degree You will already possess a proven track record of delivering superior customer service. You must have knowledge of basic networking concepts, working knowledge of PC operations which include: hardware, network settings, operations system, & MS Office applications. You must possess or be able to obtain & maintain a DOE security clearance.      

Duties:   You will lead a large-scale IT organization to successfully deliver service management for a worldwide IT enterprise for network services and will operate at the highest levels of program management complexity. You will have complete responsibility and authority for delivery of support services. Travel may be required up to 10% of the time. Experience establishing operating policies and service delivery standards affecting subordinate multi-level organizational units and the ability to interpret, execute and recommend revisions to organizational policies. Experience taking assignments received in objective terms and successfully managing multiple and concurrent projects to deliver on those objectives. Experience managing network services. (WAN/LAN/MAN) for a worldwide enterprise across multiple security domains.   Qualifications:   Clearance: This position requires a Top Secret security clearance. Required Skills: 8+ years of experience installing, configuring, managing, and maintaining Windows Server class systems. 4+ years of experience managing and maintaining Microsoft Active Directory, GPOs, and DNS. Understands disaster recovery strategies. Knowledge of HA computing and networking. (E.g. Microsoft Clustering, load balancing, TCP/IP, DNS). Understanding of application & OS security, including virus scan management and patching.   Education: Bachelor's degree in Business Administration or related field required; equivalent experience may be substituted for degree.   Certification Requirements: PMP certification.   Desired Skills: Microsoft (Microsoft Certified IT Professional, MCSA/MCSE, Microsoft Certified Technology Specialist, etc.). 1+ years of experience supporting Microsoft SCCM to include SCCM infrastructure, clients, software deployments, and reporting.   If you are interested in this Title position in City, State please apply via the, "Apply now” link provided. As an employee with Belcan Government Services, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.       Gary Munson Mike Woolsey mwoolsey@belcan.com

Responsibilities:   Conducting various product and quality process inspections based on assignment Documenting inspection results by completing reports and logs, and correctly inputting data into the quality database. Attending a daily team meeting for the area assigned Communicate any issues to the assigned lead and or supervisor Conduct daily audits of the area they are assigned; verifying tools for proper torque and calibrations; verifying proper ESD procedures are being used by manufacturing   Requirements:   Requires at least 6 months of related experience High School diploma or GED Strong attention to detail Ability to stand for a prolonged period Ability to work on ladders Manual dexterity Must be able to effectively work within a team environment Communicate and can follow verbal and written directions       Gary Munson Meghan.Dawson@staffmark.com    

Job Description: Under general supervision, performs preventive maintenance services and inspects, diagnoses and repairs vehicles and equipment.  Job Duties: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.  Works under limited supervision and selects from written instructions and established procedures to accomplish assigned tasks.  Performs repairs and assigned preventive maintenance services. Performs inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment. Utilizes vehicle computer electronics systems to interpret failure modes to initiate or assign repairs. Estimates time and material costs on vehicle repairs and requisitions new parts. Performs all work within Standard Repair Times. Performs service calls for emergency breakdowns. Conducts safety checks on vehicles. Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times. Assists senior Mechanics in the completion of project work. Reviews, completes or assigns repairs identified on Driver Vehicle Inspection Reports. Large Vehicle Mechanic Skills and Qualifications: The requirements listed below are representative of the qualifications necessary to perform the job. Education: High School Diploma or GED REQUIRED. Experience: Two year(s) of relevant work experience. Valid driver’s license and must have a clean driving record. Must be at least 18 years of age. Legally eligible to work in the United States. Ability to perform physical requirements of the position with or without reasonable accommodations. Work Environment: Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day. Required to exert physical effort in handling objects of varying weights most of the work day. Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) often. Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements often. Benefits : This is a position with the Union. Pay is $30-$35/hour plus benefits. Benefits include sick/vacation/personal days, 401K program, and more. Anthony Altemoos

ESSENTIAL JOB FUNCTIONS: Aircraft Assembler ALL The duties and responsibilities listed below apply to all levels of Aircraft Assemblers.  Each level of Aircraft Assembler has additional duties and responsibilities listed. Performs a variety of tasks, which require knowledge of fabrication techniques, materials, tools and equipment. Follows FOD (foreign object prevention) practices. Follows ESD (electronic static discharge prevention) practices. Interprets and follows manufacturing orders. Operates shop related machinery to include torque wrench, pneumatic tools, common hand tools and scales. Supports and exhibits the focus of zero defects as well as right-the-first-time approach. Inspects finished products for conformance to specifications. May work from verbal instructions. Complies with established safety directives. Maintains a clean work area and ensures strict adherence to the 5S Standards. Complies with established QMS procedures.   Aircraft Assembler I Works under close supervision. Demonstrates a basic understanding of aircraft drawings and schematics. Proficiently executes basic FOD (Foreign Object Prevention) practices. Performs basic safety wire installation. Performs basic wire soldering procedures. Assists others during ATP (Aircraft Test Procedures) process. Assists senior Aircraft Assemblers with installation of components during aircraft buildup, at Fuselage and Aircraft Assembly levels.   Aircraft Assembler II Works under limited supervision. Assembles aircraft parts and sub-assemblies. May work from engineering drawings, rough sketches and/or manuals. Rivets both solid and blind rivets. Installs safety wire. Installs electronic components. May perform electronic assembly soldering, crimping, splicing and harness fabrication, and control panel building. Consistently performs to established production standards   Aircraft Assembler III Works under minimal supervision. Ability to read and understand electronic schematics. Ability to use electronic and testing equipment. Perform electronic assembly tasks including soldering. Prepares and installs wire harnesses and electronic assemblies. Assists in the troubleshooting of aircraft as needed. Demonstrates the ability to perform required repairs as directed by Engineering and Supervision. Ability to train less experienced assemblers in the proper assembly of aircraft. Follows ATP (Aircraft Test Procedure) practices. Performs electronic assembly soldering, crimping, splicing and harness fabrication, and control panel building. Consistently performs at or above established production standards.   Other Job Functions Other duties may be assigned     SUPERVISORY RESPONSIBILITY:   None.      KNOWLEDGE, SKILLS AND ABILITIES REQUIRED:    Aircraft Assembler ALL The knowledge, skills and abilities listed below apply to all levels of Aircraft Assemblers.  Each successive level of Aircraft Assembler has additional knowledge, skills and abilities listed.   Ability to maintain sensitive and confidential information as required by government standards Ability to interact effectively with peers and supervisors Ability to interact appropriately with the public when necessary Ability to adhere to workplace rules   Aircraft Assembler I Ability to use precision hand tools a plus. Must be able to demonstrate adequate basic math skills. Must be able to demonstrate the accurate use of a tape measure. Must be able to understand and follow written and/or verbal instructions. Requires high school education or equivalent. Typical qualifications for this level include: Basic math skills Documentation – skills in reading and writing various forms of documentation Basic computer skills Developing  knowledge of the materials used within the department Ability to operate equipment being used within the department Developing an understanding of and working within CEis Assembly Processes Ensuring all work is completed within the acceptable standards of KUASs Quality Program   Aircraft Assembler II Must be able to perform basic lamination repairs. Ability to use precision hand tools. Typical qualifications for this level include an intermediate level of: Math Skills Documentation– skills in reading and writing various forms of documentation Computer Skills Materials Knowledge Ability to operate equipment used within department Ability to read, interpret, and follow processes and procedures Ability to understand and follow KUASs Quality System     Aircraft Assembler III Experience with aircraft assembly desired. Interpret and work from industry specifications. Typical qualifications for this level include an advanced level of: Math Skills Documentation– skills in reading and writing various forms of documentation Computer Skills Materials Knowledge Ability to operate equipment used within department Ability to read, interpret, and follow processes and procedures Repair – Ability to perform extensive trouble-shooting and execute repairs as directed by Engineering and Supervision Ability to understand and follow KUASs Quality System   Kratos UAS, based in Sacramento, CA, designs and delivers advanced defense, and security solutions that support the important missions of our customers. Our pride and dedication shows in everything we do. Knowing that our work enables the U.S. military and government to recognize, manage and defeat threats, inspires us to push ourselves and our technologies to new levels. Experience and Skills:   EDUCATION AND EXPERIENCE: Aircraft Assembler I             Preferably 0-2 years of hands-on experience in assembly production   Aircraft Assembler II             2-5 years of hands-on experience in electromechanical assembly   Aircraft Assembler III             5+ years of hands-on experience in electromechanical assembly    WORK ENVIRONMENT / PHYSICAL REQUIREMENTS: Ability to stand and sit for long periods of time Standing, walking, bending, reaching and working from slightly elevated surface on a regular basis  Manipulating materials, primarily using hands and arms Use of various hand tools  Occasionally lifts and carries heavy objects  Must be able to lift 50 pounds May work extended hours and/or weekends  Possibility of exposure to noise and hazardous chemicals                 Gary Munson https://kratosdefense.submit4jobs.com/index.cfm?fuseaction=85347.viewjobdetail&CID=85347&JID=272415