Job Summary
Career Level
Experienced
Travel Percentage
<10%
Full-Time / Part-Time
Full-Time
Clearance Level - Must Currently Possess
None
Shift
1st Shift
Relocation Available
No
ITAR: U.S Citizen or Green Card Required
Yes
Clearance Level - Must Be Able to Obtain
Secret
Job Description Responsible for material planning for the F-16 Automated Test Systems group. Utilize Oracle ERP and Manufacturing Execution System to plan and control work on the production floor. Duties to include working with master scheduling to plan material and labor resources, working with production supervision to support manufacturing floor and working with manufacturing engineering to implement engineering changes. Responsible for logistics and material coordination with government customer on Depot program. Typical Education & Experience Typically a Bachelor's Degree and 2 years work experience or equivalent experience Required Skills and Education Must have knowledge of materials and inventory control, MRP Systems, Microsoft Office and MMAS requirements. Must have excellent verbal and written communication skills Must have ability to lift up to 20 lbs Preferred Skills and Education Oracle ERP System About BAE Systems Electronic Systems Electronic Systems is the global innovator behind game-changing defense and commercial electronics. Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere – from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact – for our customers and the communities we serve.
Jiro Yamamoto
Work for Warriors
Dec 04, 2018
Full time
Job Summary
Career Level
Experienced
Travel Percentage
<10%
Full-Time / Part-Time
Full-Time
Clearance Level - Must Currently Possess
None
Shift
1st Shift
Relocation Available
No
ITAR: U.S Citizen or Green Card Required
Yes
Clearance Level - Must Be Able to Obtain
Secret
Job Description Responsible for material planning for the F-16 Automated Test Systems group. Utilize Oracle ERP and Manufacturing Execution System to plan and control work on the production floor. Duties to include working with master scheduling to plan material and labor resources, working with production supervision to support manufacturing floor and working with manufacturing engineering to implement engineering changes. Responsible for logistics and material coordination with government customer on Depot program. Typical Education & Experience Typically a Bachelor's Degree and 2 years work experience or equivalent experience Required Skills and Education Must have knowledge of materials and inventory control, MRP Systems, Microsoft Office and MMAS requirements. Must have excellent verbal and written communication skills Must have ability to lift up to 20 lbs Preferred Skills and Education Oracle ERP System About BAE Systems Electronic Systems Electronic Systems is the global innovator behind game-changing defense and commercial electronics. Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere – from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact – for our customers and the communities we serve.
Jiro Yamamoto
Work for Warriors
Job Description:
The Production Planning Assistant will support the production planning department. Duties include general clerical task such as data entry, correspondence preparation and maintenance, generating standard database reports, system validation, research and follow up related to special projects.
ESSENTIAL JOB FUNCTIONS:
Assist with publishing and distribution of job specific packages to include: Routers, Drawings, Manufacturing Orders, and Inspection Plans.
Conducts Plan Review steps on jobs including related ERP transactions ensuring documentary compliance.
Generates weekly reports related to LOB (Line of Balance).
Creates and generates Ad hoc reports for various program platforms
Assists the Production Planning Manager on a daily basis by providing requested status updates and discussing scheduling plans.
Creates and distributes Production Status Review minutes/resolution detail.
Performs various task within our ERP system of record.
Coordinates rescheduling of open production orders in the ERP system.
Communicates and creates work order rescheduling related to sales orders within ERP database.
Validates specific revision data and provides report detail to Production Planning Manager.
Other Job Functions
Other duties may be assigned
SUPERVISORY RESPONSIBILITY:
Not applicable
KNOWLEDGE, SKILLS AND ABILITIES REQUIRED:
Ability to maintain sensitive and confidential information as required by government standards
Ability to interact effectively with peers and supervisors.
Ability to interact appropriately with the public when necessary.
Ability to adhere to workplace rules.
Ability to effectively communicate professionally in writing or verbally with all levels of personnel.
Intermediate to advanced skills with Microsoft Office applications: Word, Excel, PowerPoint.
Minimum 2 years of experience in an office administrative role.
Familiarity with ERP systems and MRP a plus.
Experience and Skills:
EDUCATION AND EXPERIENCE:
High school diploma or equivalent.
WORK ENVIRONMENT / PHYSICAL REQUIREMENTS:
Office and/or manufacturing environment.
Ability to stand and sit for long periods of time.
Ability to perform repetitive motion (keyboarding, 10-key, phones).
Ability to lift up to 25 pounds.
Additional Information:
Job Level: Entry Level (less than 2 years)
Number of Openings: 1
Years of Experience:
Level of Education: High School/GED
Starting Date : ASAP
Dec 03, 2018
Full time
Job Description:
The Production Planning Assistant will support the production planning department. Duties include general clerical task such as data entry, correspondence preparation and maintenance, generating standard database reports, system validation, research and follow up related to special projects.
ESSENTIAL JOB FUNCTIONS:
Assist with publishing and distribution of job specific packages to include: Routers, Drawings, Manufacturing Orders, and Inspection Plans.
Conducts Plan Review steps on jobs including related ERP transactions ensuring documentary compliance.
Generates weekly reports related to LOB (Line of Balance).
Creates and generates Ad hoc reports for various program platforms
Assists the Production Planning Manager on a daily basis by providing requested status updates and discussing scheduling plans.
Creates and distributes Production Status Review minutes/resolution detail.
Performs various task within our ERP system of record.
Coordinates rescheduling of open production orders in the ERP system.
Communicates and creates work order rescheduling related to sales orders within ERP database.
Validates specific revision data and provides report detail to Production Planning Manager.
Other Job Functions
Other duties may be assigned
SUPERVISORY RESPONSIBILITY:
Not applicable
KNOWLEDGE, SKILLS AND ABILITIES REQUIRED:
Ability to maintain sensitive and confidential information as required by government standards
Ability to interact effectively with peers and supervisors.
Ability to interact appropriately with the public when necessary.
Ability to adhere to workplace rules.
Ability to effectively communicate professionally in writing or verbally with all levels of personnel.
Intermediate to advanced skills with Microsoft Office applications: Word, Excel, PowerPoint.
Minimum 2 years of experience in an office administrative role.
Familiarity with ERP systems and MRP a plus.
Experience and Skills:
EDUCATION AND EXPERIENCE:
High school diploma or equivalent.
WORK ENVIRONMENT / PHYSICAL REQUIREMENTS:
Office and/or manufacturing environment.
Ability to stand and sit for long periods of time.
Ability to perform repetitive motion (keyboarding, 10-key, phones).
Ability to lift up to 25 pounds.
Additional Information:
Job Level: Entry Level (less than 2 years)
Number of Openings: 1
Years of Experience:
Level of Education: High School/GED
Starting Date : ASAP
Job Description:
SUMMARY: Has primary responsibility for directly managing technicians and resolving any service issues that arise on a day-to-day basis. Schedules service department work activities among technicians, monitors work for completeness and timeliness, responds to customer service scheduling needs. Works closely with the Service Manager and Coordinators as an internal resource to the customer. EDUCATION and/or EXPERIENCE: Associates degree in Business or Technical discipline. Three to four years related experience and/or training; or equivalent combination of education and experience. Experience to include supervisory and computer skills, and general mechanical service abilities. Quinn is an Equal Opportunity Employer M /F /V /DV
Nov 27, 2018
Full time
Job Description:
SUMMARY: Has primary responsibility for directly managing technicians and resolving any service issues that arise on a day-to-day basis. Schedules service department work activities among technicians, monitors work for completeness and timeliness, responds to customer service scheduling needs. Works closely with the Service Manager and Coordinators as an internal resource to the customer. EDUCATION and/or EXPERIENCE: Associates degree in Business or Technical discipline. Three to four years related experience and/or training; or equivalent combination of education and experience. Experience to include supervisory and computer skills, and general mechanical service abilities. Quinn is an Equal Opportunity Employer M /F /V /DV
Job Description:
The Production Supervisor has overall responsibility for the smooth workflow of production activities on a designated shift (day, swing, grave) and across shifts as required. Supervise a number of employees engaged in production activities, ensuring that quality standards and production schedule are met.
Kratos UAS, based in Sacramento, CA, designs and delivers advanced defense, and security solutions that support the important missions of our customers. Our pride and dedication shows in everything we do. Knowing that our work enables the U.S. military and government to recognize, manage and defeat threats, inspires us to push ourselves and our technologies to new levels.
ESSENTIAL JOB FUNCTIONS:
Sets, communicates and measures performance standards (volume, quality, dependability, cooperation) of all employees assigned and retains responsibility for tasks even when delegated.
Trains employees on production practices, QMS procedures, and other company practices. May delegate on-the-job training of new hires/transfers to senior production staff.
Ensures quality of parts produced. Develops production staff to be quality conscious and accountable for their workmanship.
Ensures Compliance with QMS procedures. Evaluates processes and practices for more efficient and effective methods and recommends changes as needed.
Works with Engineering and Quality on process improvements.
Plans and allocates equipment and labor resources to ensure that production schedules can be met. Anticipates issues to prevent problems and resolves problems as they occur. Ensures that workflow continues to meet deadlines.
Works with Maintenance to ensure that equipment is maintained and repaired as needed.
Analyzes and investigates to determine root causes of nonconformance.
Completes all paperwork timely and accurately. Develops production staff so that they complete required paperwork timely and accurately.
Coaches and counsels employees on a regular basis to ensure issues are addressed in a timely manner and to promote effective communication. Initiates disciplinary actions, evaluates performance, recommends wage actions, and hires new staff.
Trains and ensures that employees follow safety precautions.
Ensures that the work area and equipment are kept clean.
Uses software to enter, monitor and analyze data.
Communicates effectively in English with all levels, both written and verbal.
Other Job Functions
Other duties may be assigned
SUPERVISORY RESPONSIBILITY:
Supervises a designated shift of production staff in a variety of work cells, possibly across multiple shifts as required.
KNOWLEDGE, SKILLS AND ABILITIES REQUIRED:
Ability to maintain sensitive and confidential information as required by government standards
Ability to interact effectively with peers and supervisors
Ability to interact appropriately with the public when necessary
Ability to adhere to workplace rules
Ability to effectively communicate professionally in writing or verbally with all levels of personnel
Is knowledgeable in the duties performed by staff; please refer to the appropriate subordinate job description(s) for details.
Strong computer, written and organization skills.
Must be effective at alliance building and creating a positive team spirit, both within his/her department and the rest of the company.
Ability to provide effective direction, leadership and team building.
Experience and Skills:
Production Supervisor, High School or equivalent experience required, 3-5 years directly related experience
Related experience showing evidence of increased responsibilities in the designated area of production (ex: grinding/finishing/painting, preferably in a setting where complex shapes and strict adherence to tolerances is required).
May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship).
WORK ENVIRONMENT / PHYSICAL REQUIREMENTS:
Office and/or manufacturing environment
Ability to stand and sit for long periods of time
Ability to perform repetitive motion (keyboarding, 10-key, phones)
Ability to lift up to 50 pounds
May work extended hours or weekends.
May be exposed to noise and hazardous chemicals.
Additional Information:
Job Level: Management
Number of Openings: 2
Years of Experience: At least 3 Years
Level of Education: High School/GED
Starting Date : ASAP
Nov 20, 2018
Full time
Job Description:
The Production Supervisor has overall responsibility for the smooth workflow of production activities on a designated shift (day, swing, grave) and across shifts as required. Supervise a number of employees engaged in production activities, ensuring that quality standards and production schedule are met.
Kratos UAS, based in Sacramento, CA, designs and delivers advanced defense, and security solutions that support the important missions of our customers. Our pride and dedication shows in everything we do. Knowing that our work enables the U.S. military and government to recognize, manage and defeat threats, inspires us to push ourselves and our technologies to new levels.
ESSENTIAL JOB FUNCTIONS:
Sets, communicates and measures performance standards (volume, quality, dependability, cooperation) of all employees assigned and retains responsibility for tasks even when delegated.
Trains employees on production practices, QMS procedures, and other company practices. May delegate on-the-job training of new hires/transfers to senior production staff.
Ensures quality of parts produced. Develops production staff to be quality conscious and accountable for their workmanship.
Ensures Compliance with QMS procedures. Evaluates processes and practices for more efficient and effective methods and recommends changes as needed.
Works with Engineering and Quality on process improvements.
Plans and allocates equipment and labor resources to ensure that production schedules can be met. Anticipates issues to prevent problems and resolves problems as they occur. Ensures that workflow continues to meet deadlines.
Works with Maintenance to ensure that equipment is maintained and repaired as needed.
Analyzes and investigates to determine root causes of nonconformance.
Completes all paperwork timely and accurately. Develops production staff so that they complete required paperwork timely and accurately.
Coaches and counsels employees on a regular basis to ensure issues are addressed in a timely manner and to promote effective communication. Initiates disciplinary actions, evaluates performance, recommends wage actions, and hires new staff.
Trains and ensures that employees follow safety precautions.
Ensures that the work area and equipment are kept clean.
Uses software to enter, monitor and analyze data.
Communicates effectively in English with all levels, both written and verbal.
Other Job Functions
Other duties may be assigned
SUPERVISORY RESPONSIBILITY:
Supervises a designated shift of production staff in a variety of work cells, possibly across multiple shifts as required.
KNOWLEDGE, SKILLS AND ABILITIES REQUIRED:
Ability to maintain sensitive and confidential information as required by government standards
Ability to interact effectively with peers and supervisors
Ability to interact appropriately with the public when necessary
Ability to adhere to workplace rules
Ability to effectively communicate professionally in writing or verbally with all levels of personnel
Is knowledgeable in the duties performed by staff; please refer to the appropriate subordinate job description(s) for details.
Strong computer, written and organization skills.
Must be effective at alliance building and creating a positive team spirit, both within his/her department and the rest of the company.
Ability to provide effective direction, leadership and team building.
Experience and Skills:
Production Supervisor, High School or equivalent experience required, 3-5 years directly related experience
Related experience showing evidence of increased responsibilities in the designated area of production (ex: grinding/finishing/painting, preferably in a setting where complex shapes and strict adherence to tolerances is required).
May be required to obtain and maintain a U.S. security clearance at the appropriate level (requires U.S. Citizenship).
WORK ENVIRONMENT / PHYSICAL REQUIREMENTS:
Office and/or manufacturing environment
Ability to stand and sit for long periods of time
Ability to perform repetitive motion (keyboarding, 10-key, phones)
Ability to lift up to 50 pounds
May work extended hours or weekends.
May be exposed to noise and hazardous chemicals.
Additional Information:
Job Level: Management
Number of Openings: 2
Years of Experience: At least 3 Years
Level of Education: High School/GED
Starting Date : ASAP
Responsibilities
Perform complex assembly work.
Tasks require the use of state of art manufacturing tools, precision measuring equipment, and machinery.
Ability to troubleshoot.
Must be able to follow verbal and written instructions for specialized equipment.
Assemblers are also responsible for quality activities.
Collaborates closely with technicians and engineers.
Identify discrepant materials/components both in writing and verbally to supervisor.
Complete tasks as directed by manufacturing schedules and within standard times.
Maintain a clean and orderly work area.
Must demonstrate an ability to perform standardized work process and defined work instructions.
Use of complex tooling that requires specialized training.
Evaluates the assembly processes and equipment to look for continuous improvement opportunities.
Possess a “get it done” attitude and an urgency to resolve problems/tasks.
Excellent written and verbal communication skills.
Requirements
Tesla Mission Driven.
Computer skills are strongly preferred (use of Word, Excel & Outlook programs).
High School diploma or equivalent, or evidence of exceptional ability.
Must have strong command of the English language, both written and verbal.
Must be reliable, have good initiative, be committed, and be quality focused.
Ability to lift up to 50 lbs as needed.
Ability to work with a team and in a fast-paced environment.
Ability to read and understand manufacturing instructions.
Ability to perform repetitious duties, including stairs and standing for long periods of time.
Must have the ability to work quickly while maintaining a high level of craftsmanship and attention to detail.
No prior manufacturing experience required.
Served in the United State Military Strongly Preferred.
TEAM A CPT Messiha
Feb 07, 2018
Full time
Responsibilities
Perform complex assembly work.
Tasks require the use of state of art manufacturing tools, precision measuring equipment, and machinery.
Ability to troubleshoot.
Must be able to follow verbal and written instructions for specialized equipment.
Assemblers are also responsible for quality activities.
Collaborates closely with technicians and engineers.
Identify discrepant materials/components both in writing and verbally to supervisor.
Complete tasks as directed by manufacturing schedules and within standard times.
Maintain a clean and orderly work area.
Must demonstrate an ability to perform standardized work process and defined work instructions.
Use of complex tooling that requires specialized training.
Evaluates the assembly processes and equipment to look for continuous improvement opportunities.
Possess a “get it done” attitude and an urgency to resolve problems/tasks.
Excellent written and verbal communication skills.
Requirements
Tesla Mission Driven.
Computer skills are strongly preferred (use of Word, Excel & Outlook programs).
High School diploma or equivalent, or evidence of exceptional ability.
Must have strong command of the English language, both written and verbal.
Must be reliable, have good initiative, be committed, and be quality focused.
Ability to lift up to 50 lbs as needed.
Ability to work with a team and in a fast-paced environment.
Ability to read and understand manufacturing instructions.
Ability to perform repetitious duties, including stairs and standing for long periods of time.
Must have the ability to work quickly while maintaining a high level of craftsmanship and attention to detail.
No prior manufacturing experience required.
Served in the United State Military Strongly Preferred.
TEAM A CPT Messiha
Jet Propulsion Laboratory
Pasadena, CA, United States
Engineering Technician (10 Open positions Secret, TS/SCI, AND ABOVE) (PRIORITY POSITIONS!) Max Pay: $45/hr
Roles and responsibilities:
Must be a US Citizen; 18 - month contract position W2 with full benefits; Must be able to pass background check and drug screen Job Description: The Engineering Technician III performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy or conformity with instructions. This technician performs at this level one or a combination of such typical duties as: a. Constructing components, subunits, or simple models or adapts standard equipment; may troubleshoot and correct malfunctions; b. Following specific layout and scientific diagrams to construct and package simple devices and subunits of equipment. c. Conducting various tests or experiments which may require minor modifications in test setups or procedures as well as subjective judgments in measurement, selecting, preparing, and operating standard test equipment and records test data; d. Extracting and compiling a variety of engineering data from field notes, manuals, lab reports, etc., processing data, identifying errors or inconsistencies, selecting methods of data presentation. e. Assisting in design modification by compiling data related to design, specifications, and materials that are pertinent to specific items of equipment or component parts; developing information concerning previous operational failures and modifications, and using judgment and initiative to recognize inconsistencies or gaps in data and seek sources to clarify information. Required Skills: • Typically requires a High School diploma with a minimum of 8 years of related experience; Associates degree with a minimum of 4 years of related experience; or Bachelor’s degree with a minimum of 1 year of related experience; related required training. • Understanding and technical experience in the following areas: -Sheet metal technician; Design, layout, fabrication of sheet metal parts and Mock-up structures o MGSE; Fabrication, assembly -Electronics as they relate to motors and actuators. -Knowledge of use of sheet metal equipment to include brakes, waterjet, punch presses, and saws. •Additionally, the following process and management skills are required: -Can work independently on complex and specialized assignments. -Requires a technician who is comfortable interacting with computers and is familiar with routine computer applications (e.g., spreadsheets, databases, word processing, Solidworks, and web searches for gathering information) Desired Skills: •Advanced understanding, technical expertise and experience in the following areas: -Sheet Metal Technician; Design, layout, fabrication -Develop flat patterns -Wood working fabrication to include shipping containers -Design skills using Solid works software -All types of fasteners and fastening systems. (e.g. keenserts, pem nuts, pem studs, heli-coil, cherry and cherry max rivets) •Additionally, the following process and management skills are desired: -Can work independently on complex and specialized assignments with minimum supervision -Skilled in operations of all shop tools to include NC and CNC sheet metal equipment Number of positions: 10
Sammi Messiha Team A
Dec 11, 2018
Full time
Engineering Technician (10 Open positions Secret, TS/SCI, AND ABOVE) (PRIORITY POSITIONS!) Max Pay: $45/hr
Roles and responsibilities:
Must be a US Citizen; 18 - month contract position W2 with full benefits; Must be able to pass background check and drug screen Job Description: The Engineering Technician III performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy or conformity with instructions. This technician performs at this level one or a combination of such typical duties as: a. Constructing components, subunits, or simple models or adapts standard equipment; may troubleshoot and correct malfunctions; b. Following specific layout and scientific diagrams to construct and package simple devices and subunits of equipment. c. Conducting various tests or experiments which may require minor modifications in test setups or procedures as well as subjective judgments in measurement, selecting, preparing, and operating standard test equipment and records test data; d. Extracting and compiling a variety of engineering data from field notes, manuals, lab reports, etc., processing data, identifying errors or inconsistencies, selecting methods of data presentation. e. Assisting in design modification by compiling data related to design, specifications, and materials that are pertinent to specific items of equipment or component parts; developing information concerning previous operational failures and modifications, and using judgment and initiative to recognize inconsistencies or gaps in data and seek sources to clarify information. Required Skills: • Typically requires a High School diploma with a minimum of 8 years of related experience; Associates degree with a minimum of 4 years of related experience; or Bachelor’s degree with a minimum of 1 year of related experience; related required training. • Understanding and technical experience in the following areas: -Sheet metal technician; Design, layout, fabrication of sheet metal parts and Mock-up structures o MGSE; Fabrication, assembly -Electronics as they relate to motors and actuators. -Knowledge of use of sheet metal equipment to include brakes, waterjet, punch presses, and saws. •Additionally, the following process and management skills are required: -Can work independently on complex and specialized assignments. -Requires a technician who is comfortable interacting with computers and is familiar with routine computer applications (e.g., spreadsheets, databases, word processing, Solidworks, and web searches for gathering information) Desired Skills: •Advanced understanding, technical expertise and experience in the following areas: -Sheet Metal Technician; Design, layout, fabrication -Develop flat patterns -Wood working fabrication to include shipping containers -Design skills using Solid works software -All types of fasteners and fastening systems. (e.g. keenserts, pem nuts, pem studs, heli-coil, cherry and cherry max rivets) •Additionally, the following process and management skills are desired: -Can work independently on complex and specialized assignments with minimum supervision -Skilled in operations of all shop tools to include NC and CNC sheet metal equipment Number of positions: 10
Sammi Messiha Team A
ABS Building Supply INC
Sacramento, CA, United States
Job Title
Receiving Associate Location Sacramento - Distribution - Sacramento, CA 95829 US (Primary) Job Type Full-time Category Warehouse Education High School/GED Career Level Entry Level Job Description
American Building Supply (ABS) , one of the Nation's largest wholesale suppliers of Doors, Door Hardware, Windows, and Millwork currently has positions available for Receiving Associates to assist our Distribution Division in providing value-added goods and services to our customers. Our company understands that it is only through our valued employees that we can be successful. We are constantly on the lookout for enthusiastic people who want to be part of a great team. Depending on assignment, successful candidates may do any of the following duties:
Maintain high quality standards
Inspect incoming loads
Select items in the warehouse for shipping
Maintain facility housekeeping standards
Use a forklift to load and unload trucks
Assist in inventory cycle counts as needed
Consistently adhere to safe work practices
Building racking for storage of product
Reorganizing product in bins and racking
Job Requirements
Requirements: Qualified applicant will have a minimum of 1-2 years manufacturing or warehousing experience, preferably in building materials. Must be highly motivated and a self-starter. Knowledge of the millwork industry a definite plus. Prior forklift and order picker experience. Other important qualifications:
Positive outgoing attitude
Strong verbal and written communication skills
Self-motivated, goal oriented
Ability to work with others in a fast-paced, high-volume environment
Ability to promote and maintain a TEAM atmosphere
ABS takes pride in providing a supportive, employee-friendly environment. Our total compensation package includes health insurance, paid vacation and a 401(k) retirement plan. While this helps us attract good people, our culture helps us keep them. We truly care about our employees and want your experience with us to be positive and rewarding.
Gary Munson
Team C
Dec 10, 2018
Full time
Job Title
Receiving Associate Location Sacramento - Distribution - Sacramento, CA 95829 US (Primary) Job Type Full-time Category Warehouse Education High School/GED Career Level Entry Level Job Description
American Building Supply (ABS) , one of the Nation's largest wholesale suppliers of Doors, Door Hardware, Windows, and Millwork currently has positions available for Receiving Associates to assist our Distribution Division in providing value-added goods and services to our customers. Our company understands that it is only through our valued employees that we can be successful. We are constantly on the lookout for enthusiastic people who want to be part of a great team. Depending on assignment, successful candidates may do any of the following duties:
Maintain high quality standards
Inspect incoming loads
Select items in the warehouse for shipping
Maintain facility housekeeping standards
Use a forklift to load and unload trucks
Assist in inventory cycle counts as needed
Consistently adhere to safe work practices
Building racking for storage of product
Reorganizing product in bins and racking
Job Requirements
Requirements: Qualified applicant will have a minimum of 1-2 years manufacturing or warehousing experience, preferably in building materials. Must be highly motivated and a self-starter. Knowledge of the millwork industry a definite plus. Prior forklift and order picker experience. Other important qualifications:
Positive outgoing attitude
Strong verbal and written communication skills
Self-motivated, goal oriented
Ability to work with others in a fast-paced, high-volume environment
Ability to promote and maintain a TEAM atmosphere
ABS takes pride in providing a supportive, employee-friendly environment. Our total compensation package includes health insurance, paid vacation and a 401(k) retirement plan. While this helps us attract good people, our culture helps us keep them. We truly care about our employees and want your experience with us to be positive and rewarding.
Gary Munson
Team C
ABS Building Supply INC
Sacramento, CA, United States
Job Title
Material Handlers
Location
Sacramento Manufacturing - Sacramento, CA 95828 US (Primary)
Job Type
Full-time
Category
Manufacturing
Education
None
Career Level
Entry Level
Job Description
American Building Supply (ABS) , one of the Nation's largest wholesale suppliers of Doors, Door Hardware, Windows, and Millwork, currently has positions available for Machine Operators/Material Handlers to assist our Manufacturing Division in providing value-added goods and services to our customers. Our company understands that it is only through our valued employees that we can be successful. We are constantly on the lookout for enthusiastic people who want to be part of a great team. If you have experience with carpentry, cabinetry, ability to read a tape measure, and know how to use wood cutting tools - we will train you in your job responsibilities. General Description Of Duties:
Read and understand production order tags
Machining
Pull material from bulk stock and move to prep areas
Operate basic hand tools as well as bench-mounted and floor-mounted power tools
Cut bulk stock to size for production
Clean and package material
Perform quality control inspections
Keep work area clean and organized
Job Requirements
Past experience working in a production environment
Ability to accurately read a tape measure
Basic mathematical skills
Excellent work habits
Self-motivated, goal oriented
Ability to work with others in a fast-paced, high-volume environment
ABS takes pride in providing a supportive, employee-friendly environment. Our total compensation package includes health insurance, paid vacation, and 401(k) retirement plan. While this helps us attract good people, our culture helps us keep them. We truly care about our employees and want your experience with us to be positive and rewarding. Please respond to this posting with resume and salary history in Word or PDF format. American Building Supply is an Equal Opportunity Employer. ABS is a drug-free workplace. Candidates are required to pass a drug test before beginning employment.
Dec 10, 2018
Full time
Job Title
Material Handlers
Location
Sacramento Manufacturing - Sacramento, CA 95828 US (Primary)
Job Type
Full-time
Category
Manufacturing
Education
None
Career Level
Entry Level
Job Description
American Building Supply (ABS) , one of the Nation's largest wholesale suppliers of Doors, Door Hardware, Windows, and Millwork, currently has positions available for Machine Operators/Material Handlers to assist our Manufacturing Division in providing value-added goods and services to our customers. Our company understands that it is only through our valued employees that we can be successful. We are constantly on the lookout for enthusiastic people who want to be part of a great team. If you have experience with carpentry, cabinetry, ability to read a tape measure, and know how to use wood cutting tools - we will train you in your job responsibilities. General Description Of Duties:
Read and understand production order tags
Machining
Pull material from bulk stock and move to prep areas
Operate basic hand tools as well as bench-mounted and floor-mounted power tools
Cut bulk stock to size for production
Clean and package material
Perform quality control inspections
Keep work area clean and organized
Job Requirements
Past experience working in a production environment
Ability to accurately read a tape measure
Basic mathematical skills
Excellent work habits
Self-motivated, goal oriented
Ability to work with others in a fast-paced, high-volume environment
ABS takes pride in providing a supportive, employee-friendly environment. Our total compensation package includes health insurance, paid vacation, and 401(k) retirement plan. While this helps us attract good people, our culture helps us keep them. We truly care about our employees and want your experience with us to be positive and rewarding. Please respond to this posting with resume and salary history in Word or PDF format. American Building Supply is an Equal Opportunity Employer. ABS is a drug-free workplace. Candidates are required to pass a drug test before beginning employment.
Description
Northrop Grumman Mission Systems sector is seeking an Assembler 2 (2nd Shift) to join our team of qualified, diverse individuals. This position will be located at the Spectrum Facility in San Diego, CA. 2nd shift hours are from 3:30 pm - 1am and follows a 9/80 work week. Join the men and women of the Northrop Grumman Mission Systems in meeting the largest, most complex systems challenges imaginable for government, military and business. Avionics and Tactical Networks (ATN) is an operating unit within the Mission Systems division of Northrop Grumman Information Systems. ATN is located in the Rancho Carmel facility in San Diego, California. The business has developed and advanced software-defined radio technology for sophisticated communications in a network-centric environment. A&TN focuses on providing advanced technologies, engineering development and production for our software-defined radio programs. A&TN programs include the communications, navigation and identification (CNI) production for F-22 and F-35 aircraft and production of advanced multi-function RF products such as JCREW. Roles and Responsibilities: Set up test apparatus and conduct tests of production assemblies and units following methods, procedures, standards, and sequences.
Lay out and assembles units for production equipment according to designs and specifications.
Adjust and calibrates systems as needed.
Modify equipment by adding, removing, or altering components as defined by predetermined diagrams and sketches.
Correct malfunctions by making adjustments or replacing parts or components as directed.
Use hand and small power tools, and various measuring and testing devices in performing job duties.
May monitor and verify quality in accordance with statistical process or other control procedures.
ERCOMMS
Qualifications
Basic Qualifications: To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below: High School diploma and 2 years’ relevant experience is required.
The ability to obtain a DoD Secret Clearance which requires US citizenship.
Experience with Filter assemblies and/or J-STD-001 certification knowledge.
Knowledge of techniques, approaches, guidelines, policies and procedures in the job area.
Must be able to perform assembly techniques in order to make modifications, reworks and assemblies.
Ability to perform basic problem solving techniques which are fully defined and available through the supervisor, coworkers and written materials.
Must have experience with soldering small electronics.
Must be able to work 2nd Shift
Must possess basic, verbal and written communication skills for minimal interaction with others.
Preferred Qualifications: Candidates with these desired skills will be given preferential consideration: Current J-STD-001 certification.
Team C
Gary Munson
Dec 10, 2018
Full time
Description
Northrop Grumman Mission Systems sector is seeking an Assembler 2 (2nd Shift) to join our team of qualified, diverse individuals. This position will be located at the Spectrum Facility in San Diego, CA. 2nd shift hours are from 3:30 pm - 1am and follows a 9/80 work week. Join the men and women of the Northrop Grumman Mission Systems in meeting the largest, most complex systems challenges imaginable for government, military and business. Avionics and Tactical Networks (ATN) is an operating unit within the Mission Systems division of Northrop Grumman Information Systems. ATN is located in the Rancho Carmel facility in San Diego, California. The business has developed and advanced software-defined radio technology for sophisticated communications in a network-centric environment. A&TN focuses on providing advanced technologies, engineering development and production for our software-defined radio programs. A&TN programs include the communications, navigation and identification (CNI) production for F-22 and F-35 aircraft and production of advanced multi-function RF products such as JCREW. Roles and Responsibilities: Set up test apparatus and conduct tests of production assemblies and units following methods, procedures, standards, and sequences.
Lay out and assembles units for production equipment according to designs and specifications.
Adjust and calibrates systems as needed.
Modify equipment by adding, removing, or altering components as defined by predetermined diagrams and sketches.
Correct malfunctions by making adjustments or replacing parts or components as directed.
Use hand and small power tools, and various measuring and testing devices in performing job duties.
May monitor and verify quality in accordance with statistical process or other control procedures.
ERCOMMS
Qualifications
Basic Qualifications: To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below: High School diploma and 2 years’ relevant experience is required.
The ability to obtain a DoD Secret Clearance which requires US citizenship.
Experience with Filter assemblies and/or J-STD-001 certification knowledge.
Knowledge of techniques, approaches, guidelines, policies and procedures in the job area.
Must be able to perform assembly techniques in order to make modifications, reworks and assemblies.
Ability to perform basic problem solving techniques which are fully defined and available through the supervisor, coworkers and written materials.
Must have experience with soldering small electronics.
Must be able to work 2nd Shift
Must possess basic, verbal and written communication skills for minimal interaction with others.
Preferred Qualifications: Candidates with these desired skills will be given preferential consideration: Current J-STD-001 certification.
Team C
Gary Munson
Description
Northrop Grumman Mission Systems sector is seeking a Manager, Manufacturing to join our team of qualified, diverse individuals supporting the weekend shift. This position will be located at the Rancho Carmel Facility in San Diego, CA. Join the men and women of the Northrop Grumman Mission Systems in meeting the largest, most complex systems challenges imaginable for government, military and business. Avionics and Tactical Networks (ATN) is an operating unit within the Mission Systems division of Northrop Grumman Information Systems. ATN is located in the Rancho Carmel facility in San Diego, California. The business has developed and advanced software-defined radio technology for sophisticated communications in a network-centric environment. A&TN focuses on providing advanced technologies, engineering development and production for our software-defined radio programs. A&TN programs include the communications, navigation and identification (CNI) production for F-22 and F-35 aircraft and production of advanced multi-function RF products such as JCREW. Roles and Responsibilities: Responsible for the direct supervision/management of the staff. Directing and providing objective-oriented guidance to subordinates utilizing management guidelines & general policies. ERCOMMS
Qualifications
Basic Qualifications: To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:
Bachelors degree in a STEM field with 2 years manufacturing experience or 6 years experience working in a manufacturing environment
First Line Manager experience managing assemblers and test technicians
Prior experience with Line Scheduling
Prior experience with Environmental Health and Safety (EHS)
U.S. Citizenship
Must be able to obtain a Secret Clearance with Special Access Permission.
Preferred Qualifications: Candidates with these desired skills will be given preferential consideration:
Bachelors degree in a STEM field.
Electronics test and troubleshooting experience.
Experience working in a DoD manufacturing environment
Experience in electronics manufacturing environment
Prior experience with Lean Manufacturing
Prior experience utilizing Kaizen Techniques
Experience with Monthly Preventative Maintenance on Production and
Environmental Test equipment. To Include but not limited to, Stencil Cleaner, Vibration systems, Temp Chambers, Pad Cooling Systems and Fume Extractors
Experience with SAP and shop floor control systems
Experience with calibration of test equipment
Understanding development of overhead budgets for supplies and expenditures
Proficient in ESD Training and Certifications
Proficient in electronics equipment programming and maintenance
Ability to track PO Funding and Period of Performance for all Production equipment requiring repair and update as required
Ability to ensure that all chemical supplies requiring shelf life are current and not expired
Experience with purchasing supplies, chemicals, spare parts and tools for production labs
Team C
Gary Munson
Dec 10, 2018
Full time
Description
Northrop Grumman Mission Systems sector is seeking a Manager, Manufacturing to join our team of qualified, diverse individuals supporting the weekend shift. This position will be located at the Rancho Carmel Facility in San Diego, CA. Join the men and women of the Northrop Grumman Mission Systems in meeting the largest, most complex systems challenges imaginable for government, military and business. Avionics and Tactical Networks (ATN) is an operating unit within the Mission Systems division of Northrop Grumman Information Systems. ATN is located in the Rancho Carmel facility in San Diego, California. The business has developed and advanced software-defined radio technology for sophisticated communications in a network-centric environment. A&TN focuses on providing advanced technologies, engineering development and production for our software-defined radio programs. A&TN programs include the communications, navigation and identification (CNI) production for F-22 and F-35 aircraft and production of advanced multi-function RF products such as JCREW. Roles and Responsibilities: Responsible for the direct supervision/management of the staff. Directing and providing objective-oriented guidance to subordinates utilizing management guidelines & general policies. ERCOMMS
Qualifications
Basic Qualifications: To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:
Bachelors degree in a STEM field with 2 years manufacturing experience or 6 years experience working in a manufacturing environment
First Line Manager experience managing assemblers and test technicians
Prior experience with Line Scheduling
Prior experience with Environmental Health and Safety (EHS)
U.S. Citizenship
Must be able to obtain a Secret Clearance with Special Access Permission.
Preferred Qualifications: Candidates with these desired skills will be given preferential consideration:
Bachelors degree in a STEM field.
Electronics test and troubleshooting experience.
Experience working in a DoD manufacturing environment
Experience in electronics manufacturing environment
Prior experience with Lean Manufacturing
Prior experience utilizing Kaizen Techniques
Experience with Monthly Preventative Maintenance on Production and
Environmental Test equipment. To Include but not limited to, Stencil Cleaner, Vibration systems, Temp Chambers, Pad Cooling Systems and Fume Extractors
Experience with SAP and shop floor control systems
Experience with calibration of test equipment
Understanding development of overhead budgets for supplies and expenditures
Proficient in ESD Training and Certifications
Proficient in electronics equipment programming and maintenance
Ability to track PO Funding and Period of Performance for all Production equipment requiring repair and update as required
Ability to ensure that all chemical supplies requiring shelf life are current and not expired
Experience with purchasing supplies, chemicals, spare parts and tools for production labs
Team C
Gary Munson
Material Structures Technician- Entry Level
Requisition ID
: 18003388
Location
: United States-California-Palmdale US Citizenship Required for this Position : Yes Relocation Assistance : Relocation assistance may be available Clearance Type : Secret
Shift
: Multiple
Travel
: No Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems in air and space that impact people’s lives around the world today, and for generations to come. Our work preserves freedom and democracy, and advances human discovery and our understanding of the universe. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have a lot of fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they’re making history. Northrop Grumman Aerospace Systems has an opening for a Material Structures Technician- Entry Level to join our team of qualified, diverse individuals. This position will be located in Palmdale or Mojave, CA. The selected candidate will perform a variety of operations such as measuring steps and gaps, assemble and disassemble parts, install fasteners. This position will apply shim coating per specific instructions. The use of precision instrumentation is required, as well as working within tight time limits. Ability to lift 30 pounds. Ability to work any shift and any location. Qualifications Essential Functions Assembly and disassembly of parts Ability to apply shim coating per specific requirements Ability to use precision instrumentation Ability to install and reinstall parts Ability to install fasteners Required ability to perform moderately strenuous physical and repetitious work to include: bending, stooping, kneeling, lifting, and working overhead Must be able to access small confined spaces and work in an enclosed environment Ability to lift 30 pounds Basic Qualifications: •High School diploma/GED •Minimum of 3 months work experience •The ability to pass Special Medical/Respiratory Exam. •The ability to acquire enhanced security clearance and/or program access prior to beginning work. •The ability to work any shift or work schedule. •Able to work at Palmdale or Mojave site. •Ability to lift 30 pounds •Ability to perform moderately strenuous physical and repetitious work to include: bending, stooping, kneeling, lifting, and working overhead •Ability to work with precision instrumentation •Ability to access small confined spaces and work in an enclosed environment Preferred Qualifications: •Active DOD Secret Clearance with an investigation date/periodic review within the last 6 years. •Experience with structural coatings Gary Munson Team C
Dec 10, 2018
Full time
Material Structures Technician- Entry Level
Requisition ID
: 18003388
Location
: United States-California-Palmdale US Citizenship Required for this Position : Yes Relocation Assistance : Relocation assistance may be available Clearance Type : Secret
Shift
: Multiple
Travel
: No Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems in air and space that impact people’s lives around the world today, and for generations to come. Our work preserves freedom and democracy, and advances human discovery and our understanding of the universe. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have a lot of fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they’re making history. Northrop Grumman Aerospace Systems has an opening for a Material Structures Technician- Entry Level to join our team of qualified, diverse individuals. This position will be located in Palmdale or Mojave, CA. The selected candidate will perform a variety of operations such as measuring steps and gaps, assemble and disassemble parts, install fasteners. This position will apply shim coating per specific instructions. The use of precision instrumentation is required, as well as working within tight time limits. Ability to lift 30 pounds. Ability to work any shift and any location. Qualifications Essential Functions Assembly and disassembly of parts Ability to apply shim coating per specific requirements Ability to use precision instrumentation Ability to install and reinstall parts Ability to install fasteners Required ability to perform moderately strenuous physical and repetitious work to include: bending, stooping, kneeling, lifting, and working overhead Must be able to access small confined spaces and work in an enclosed environment Ability to lift 30 pounds Basic Qualifications: •High School diploma/GED •Minimum of 3 months work experience •The ability to pass Special Medical/Respiratory Exam. •The ability to acquire enhanced security clearance and/or program access prior to beginning work. •The ability to work any shift or work schedule. •Able to work at Palmdale or Mojave site. •Ability to lift 30 pounds •Ability to perform moderately strenuous physical and repetitious work to include: bending, stooping, kneeling, lifting, and working overhead •Ability to work with precision instrumentation •Ability to access small confined spaces and work in an enclosed environment Preferred Qualifications: •Active DOD Secret Clearance with an investigation date/periodic review within the last 6 years. •Experience with structural coatings Gary Munson Team C
Location
: United States-California-Palmdale US Citizenship Required for this Position : Yes Relocation Assistance : Relocation assistance may be available Clearance Type : Secret
Shift
: Multiple
Travel
: No Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems in air and space that impact people’s lives around the world today, and for generations to come. Our work preserves freedom and democracy, and advances human discovery and our understanding of the universe. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have a lot of fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they’re making history. Northrop Grumman Aerospace Systems has an opening for an Aircraft Electrician- Level 2 to join our team of qualified, diverse individuals. This position will be located in Palmdale or Mojave, CA. The selected candidate will perform all duties required to lay-out, fabricate, and install electrical wiring or coaxial cables on aircraft. Qualifications Essential Functions:
Electrical assembly and wire harness installation
Checks, tests, and troubleshoots electrical systems for conformance to specifications and performs repair, removal, and reinstallation of wiring as necessary.
Cuts wire to length, strips insulation from wire ends, and insulates connections with plastic sleeves.
Attaches wire or complicated electrical systems to fixtures and accessories such as: transformers, instrument panels, and switchboards with fasteners (bolts, screws, or solder).
May monitor and verify quality in accordance with statistical process or other control procedures.
Required ability to perform moderately strenuous physical and repetitious work to include: bending, stooping, kneeling, lifting, and working overhead.
Required ability to be certified for a half & full face respirator.
Must be able to access small confined spaces and work in an enclosed environment.
Basic Qualifications:
High School diploma/GED
Minimum of 2 years’ electrical experience in an aerospace, automotive, military, manufacturing and/or maintenance environment.
The ability to pass Special Medical/Respiratory Exam.
The ability to acquire enhanced security clearance and/or program access prior to beginning work.
The ability to work any shift or work schedule.
The ability to work at either Palmdale or Mojave site .
Preferred Qualifications:
Active DOD Secret Clearance with an investigation date/periodic review within the last 6 years.
Completion of Electronics Technology courses or equivalent program.
Completion of an A&P certificate program or equivalent program.
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO . U.S. Citizenship is required for most positions.
Gary Munson Team C
Dec 10, 2018
Full time
Location
: United States-California-Palmdale US Citizenship Required for this Position : Yes Relocation Assistance : Relocation assistance may be available Clearance Type : Secret
Shift
: Multiple
Travel
: No Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems in air and space that impact people’s lives around the world today, and for generations to come. Our work preserves freedom and democracy, and advances human discovery and our understanding of the universe. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have a lot of fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they’re making history. Northrop Grumman Aerospace Systems has an opening for an Aircraft Electrician- Level 2 to join our team of qualified, diverse individuals. This position will be located in Palmdale or Mojave, CA. The selected candidate will perform all duties required to lay-out, fabricate, and install electrical wiring or coaxial cables on aircraft. Qualifications Essential Functions:
Electrical assembly and wire harness installation
Checks, tests, and troubleshoots electrical systems for conformance to specifications and performs repair, removal, and reinstallation of wiring as necessary.
Cuts wire to length, strips insulation from wire ends, and insulates connections with plastic sleeves.
Attaches wire or complicated electrical systems to fixtures and accessories such as: transformers, instrument panels, and switchboards with fasteners (bolts, screws, or solder).
May monitor and verify quality in accordance with statistical process or other control procedures.
Required ability to perform moderately strenuous physical and repetitious work to include: bending, stooping, kneeling, lifting, and working overhead.
Required ability to be certified for a half & full face respirator.
Must be able to access small confined spaces and work in an enclosed environment.
Basic Qualifications:
High School diploma/GED
Minimum of 2 years’ electrical experience in an aerospace, automotive, military, manufacturing and/or maintenance environment.
The ability to pass Special Medical/Respiratory Exam.
The ability to acquire enhanced security clearance and/or program access prior to beginning work.
The ability to work any shift or work schedule.
The ability to work at either Palmdale or Mojave site .
Preferred Qualifications:
Active DOD Secret Clearance with an investigation date/periodic review within the last 6 years.
Completion of Electronics Technology courses or equivalent program.
Completion of an A&P certificate program or equivalent program.
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO . U.S. Citizenship is required for most positions.
Gary Munson Team C
Location
: United States-California-Palmdale
US Citizenship Required for this Position: Yes
Relocation Assistance: Relocation assistance may be available
Clearance Type: Secret
Shift
: Multiple
Travel
: No
Description
At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems in air and space that impact people’s lives around the world today, and for generations to come. Our work preserves freedom and democracy, and advances human discovery and our understanding of the universe. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have a lot of fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they’re making history.
Northrop Grumman Aerospace Systems has an opening for an Aircraft Structures Mechanic- Level 1 to join our team of qualified, diverse individuals. This position will be located in Palmdale or Mojave, CA.
The selected candidate will perform a variety of operations to assemble and make major assembly structures such as fuselage panels and bulkheads, and structural subassemblies such as rudders, flaps, and stabilizers.
Qualifications
Essential Functions:
Read and understand blueprints
Translate blueprints into fabrications of structural assemblies to include: precision drilling, countersinking, and the use of calibrated tools
Aligning parts on jigs using templates and fixtures
Performing part-fitting operations: filing sawing, burring, crimping, trimming, framing, riveting, drilling and reaming
Measures parts with micrometers and calipers to verify dimensions
May modify incomplete and complete assemblies to incorporate changes to structure and verify quality in accordance with statistical process or other control procedures
Required ability to perform moderately strenuous physical and repetitious work to include: bending, stooping, kneeling, lifting, and working overhead
Required ability to be certified for a half & full face respirator
Must be able to access small confined spaces and work in an enclosed environment
Basic Qualifications:
High School diploma/GED
Minimum of 9 months structures/sheet metal experience in an aerospace, automotive, military, manufacturing and/or maintenance environment OR enrollment in an A&P certificate program or equivalent program.
The ability to pass Special Medical/Respiratory Exam.
The ability to acquire enhanced security clearance and/or program access prior to beginning work.
The ability to work any shift or work schedule.
Must be able to work at Palmdale or Mojave site.
Preferred Qualifications:
Active DOD Secret Clearance with an investigation date/periodic review within the last 6 years.
Completion of A&P certificate program or equivalent program.
Experience with structural subassemblies such as rudders, flaps and stabilizers.
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO . U.S. Citizenship is required for most positions.
Gary Munson
Team C
Dec 10, 2018
Full time
Location
: United States-California-Palmdale
US Citizenship Required for this Position: Yes
Relocation Assistance: Relocation assistance may be available
Clearance Type: Secret
Shift
: Multiple
Travel
: No
Description
At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems in air and space that impact people’s lives around the world today, and for generations to come. Our work preserves freedom and democracy, and advances human discovery and our understanding of the universe. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have a lot of fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they’re making history.
Northrop Grumman Aerospace Systems has an opening for an Aircraft Structures Mechanic- Level 1 to join our team of qualified, diverse individuals. This position will be located in Palmdale or Mojave, CA.
The selected candidate will perform a variety of operations to assemble and make major assembly structures such as fuselage panels and bulkheads, and structural subassemblies such as rudders, flaps, and stabilizers.
Qualifications
Essential Functions:
Read and understand blueprints
Translate blueprints into fabrications of structural assemblies to include: precision drilling, countersinking, and the use of calibrated tools
Aligning parts on jigs using templates and fixtures
Performing part-fitting operations: filing sawing, burring, crimping, trimming, framing, riveting, drilling and reaming
Measures parts with micrometers and calipers to verify dimensions
May modify incomplete and complete assemblies to incorporate changes to structure and verify quality in accordance with statistical process or other control procedures
Required ability to perform moderately strenuous physical and repetitious work to include: bending, stooping, kneeling, lifting, and working overhead
Required ability to be certified for a half & full face respirator
Must be able to access small confined spaces and work in an enclosed environment
Basic Qualifications:
High School diploma/GED
Minimum of 9 months structures/sheet metal experience in an aerospace, automotive, military, manufacturing and/or maintenance environment OR enrollment in an A&P certificate program or equivalent program.
The ability to pass Special Medical/Respiratory Exam.
The ability to acquire enhanced security clearance and/or program access prior to beginning work.
The ability to work any shift or work schedule.
Must be able to work at Palmdale or Mojave site.
Preferred Qualifications:
Active DOD Secret Clearance with an investigation date/periodic review within the last 6 years.
Completion of A&P certificate program or equivalent program.
Experience with structural subassemblies such as rudders, flaps and stabilizers.
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO . U.S. Citizenship is required for most positions.
Gary Munson
Team C
Description
At Northrop Grumman we develop cutting-edge technology that preserves freedom and advances human discovery. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation’s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We continue to innovate with developments from launching the first commercial flight to space, to discovering the early beginnings of the universe. Our employees are not only part of history, they’re making history.
Northrop Grumman Aerospace Systems (NGAS) is currently seeking a General Manufacturing Supervisor with an active D.O.D. Secret clearance to join our team in Palmdale, CA!
The Autonomous Systems Supervisor has the responsibility, authority, and accountability for leading the manufacturing activities of a given cost center(s) within High Altitude and Long Endurance (HALE) Programs, including quality, cost and schedule objectives and factory accountability.
This role is responsible for: Providing direction to employees for final assembly, aircraft test and flight operations, and ensuring adherence to procedures, safety, quality, cost, and schedule requirements of various High Altitude and Long Endurance (HALE) products. Approving labor, ensuring Title V (environmental compliance), and all training requirements have met company processes, procedures, and DoD contract requirements. Establishing well working relationships with subordinates, peers and support groups, through engagement while resolving conflicts, constraints, actions and affordability items. Communicating openly and displaying high ethics. Planning and monitoring various statements of work while ensuring thoroughness of data. Have a full understanding and successful execution of ground testing and flight operations per DoD contract requirements. This position is also responsible for facilities planning, shop layouts, production schedule planning and labor plans associated with this statement of work.
.
Qualifications
Basic Qualifications:
Associates Degree (or High School Diploma/GED with 4 additional years of experience) and a minimum of 3 years of aircraft experience with structural assemblies, mechanical, electrical, and subsystem installations and testing
Active DoD Secret Clearance must be held and maintained to oversee COMSEC custodianship duties. U.S. Citizenship is required.
Must have working knowledge or ability to quickly learn technical orders and required contract ground operations procedures.
Must have experience working with Government/Civilian customers and be an integral part of a team in a lead role.
SHIFT: Positions 2nd shift and must be willing to work any shift.
Preferred Qualifications:
Bachelor’s Degree in Business Administration or related aerospace field.
3 years in a leadership role
Knowledge of MES, Teamcenter, Process Work Instructions (PWI’s), and Process Specifications.
Gary Munson
Team C
Dec 10, 2018
Full time
Description
At Northrop Grumman we develop cutting-edge technology that preserves freedom and advances human discovery. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation’s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We continue to innovate with developments from launching the first commercial flight to space, to discovering the early beginnings of the universe. Our employees are not only part of history, they’re making history.
Northrop Grumman Aerospace Systems (NGAS) is currently seeking a General Manufacturing Supervisor with an active D.O.D. Secret clearance to join our team in Palmdale, CA!
The Autonomous Systems Supervisor has the responsibility, authority, and accountability for leading the manufacturing activities of a given cost center(s) within High Altitude and Long Endurance (HALE) Programs, including quality, cost and schedule objectives and factory accountability.
This role is responsible for: Providing direction to employees for final assembly, aircraft test and flight operations, and ensuring adherence to procedures, safety, quality, cost, and schedule requirements of various High Altitude and Long Endurance (HALE) products. Approving labor, ensuring Title V (environmental compliance), and all training requirements have met company processes, procedures, and DoD contract requirements. Establishing well working relationships with subordinates, peers and support groups, through engagement while resolving conflicts, constraints, actions and affordability items. Communicating openly and displaying high ethics. Planning and monitoring various statements of work while ensuring thoroughness of data. Have a full understanding and successful execution of ground testing and flight operations per DoD contract requirements. This position is also responsible for facilities planning, shop layouts, production schedule planning and labor plans associated with this statement of work.
.
Qualifications
Basic Qualifications:
Associates Degree (or High School Diploma/GED with 4 additional years of experience) and a minimum of 3 years of aircraft experience with structural assemblies, mechanical, electrical, and subsystem installations and testing
Active DoD Secret Clearance must be held and maintained to oversee COMSEC custodianship duties. U.S. Citizenship is required.
Must have working knowledge or ability to quickly learn technical orders and required contract ground operations procedures.
Must have experience working with Government/Civilian customers and be an integral part of a team in a lead role.
SHIFT: Positions 2nd shift and must be willing to work any shift.
Preferred Qualifications:
Bachelor’s Degree in Business Administration or related aerospace field.
3 years in a leadership role
Knowledge of MES, Teamcenter, Process Work Instructions (PWI’s), and Process Specifications.
Gary Munson
Team C
Description
Manufacturing and Machining Manager 2
Northrop Grumman Electronic Systems sector is seeking a Weld & Fabrication Manager 2 to join our team of qualified, diverse individuals. This position will be located in Sunnyvale, California. Northrop Grumman Marines Systems specializes in the development of; manufacturing, assembly and testing of missile launching and handling systems, and propulsion power generation systems for naval surface ships and submarines. The candidate selected will assume the responsibility of supervising Fabrication and Weld, and Heat Treat areas within the Marine Manufacturing Department. This is a three shift facility and the candidate selected may be required to work any shift.
This position will supervise approximately 13-15 hourly employees to meet contract delivery requirements. This responsibility entails the following: Supervise shop personnel to ensure compliance with shop instructions, i.e. drawings, programs, tooling, manufacturing methods and QA documents with emphasis on weld procedures and processes. The fundamental understanding of lean principals are required to lead, guide, and direct the efforts of the team with the highest regard to safety and budget goals. Ensure compliance with Company Policies, Procedures and Shop Paper Handbook. Instill strong manufacturing practices in housekeeping set forth by Environmental Health and Safety. Functional management responsibilities will include direct employee management, annual EPAS reviews, engagement activities, and capital and equipment modernization efforts. Additionally, apply the Union and Company agreement to ensure compliance with the Company Policies and Procedures.
Qualifications
Basic Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:
BS of technical or business management degree plus five years related experience in fabrication and assembly with an emphasis in welding processes; or, minimum of AA of technical or business management degree plus ten years related experience in fabrication and assembly with an emphasis in welding processes. Consideration will be given with internal candidates who are currently enrolled in an accredited AA technical or business degree program and expected to complete within the next calendar year.
Significant supervisory experience with strong coaching / leadership skills
Strong knowledge in Welding & NDT method and processes.
Resolve complex problems requiring technical and management solutions with Operations support team
Must have experience with complete Microsoft Office Suite
Ability to work first/day shift or second/swing shift.
Must be a US Citizen with the ability to obtain a clearance.
Preferred Qualifications:
Candidates with these desired skills will be given preferential consideration:
- Related experience in machining, assembly and machine maintenance
- Current, active security clearance preferred.
Gary Munson
Team C
Dec 10, 2018
Full time
Description
Manufacturing and Machining Manager 2
Northrop Grumman Electronic Systems sector is seeking a Weld & Fabrication Manager 2 to join our team of qualified, diverse individuals. This position will be located in Sunnyvale, California. Northrop Grumman Marines Systems specializes in the development of; manufacturing, assembly and testing of missile launching and handling systems, and propulsion power generation systems for naval surface ships and submarines. The candidate selected will assume the responsibility of supervising Fabrication and Weld, and Heat Treat areas within the Marine Manufacturing Department. This is a three shift facility and the candidate selected may be required to work any shift.
This position will supervise approximately 13-15 hourly employees to meet contract delivery requirements. This responsibility entails the following: Supervise shop personnel to ensure compliance with shop instructions, i.e. drawings, programs, tooling, manufacturing methods and QA documents with emphasis on weld procedures and processes. The fundamental understanding of lean principals are required to lead, guide, and direct the efforts of the team with the highest regard to safety and budget goals. Ensure compliance with Company Policies, Procedures and Shop Paper Handbook. Instill strong manufacturing practices in housekeeping set forth by Environmental Health and Safety. Functional management responsibilities will include direct employee management, annual EPAS reviews, engagement activities, and capital and equipment modernization efforts. Additionally, apply the Union and Company agreement to ensure compliance with the Company Policies and Procedures.
Qualifications
Basic Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:
BS of technical or business management degree plus five years related experience in fabrication and assembly with an emphasis in welding processes; or, minimum of AA of technical or business management degree plus ten years related experience in fabrication and assembly with an emphasis in welding processes. Consideration will be given with internal candidates who are currently enrolled in an accredited AA technical or business degree program and expected to complete within the next calendar year.
Significant supervisory experience with strong coaching / leadership skills
Strong knowledge in Welding & NDT method and processes.
Resolve complex problems requiring technical and management solutions with Operations support team
Must have experience with complete Microsoft Office Suite
Ability to work first/day shift or second/swing shift.
Must be a US Citizen with the ability to obtain a clearance.
Preferred Qualifications:
Candidates with these desired skills will be given preferential consideration:
- Related experience in machining, assembly and machine maintenance
- Current, active security clearance preferred.
Gary Munson
Team C
Description
Northrop Grumman Marines Systems specializes in the development; manufacture assembly and testing of missile launching and handling systems and propulsion, and power generation systems for naval surface ships and submarines. This position will supervise the factory hourly assembly mechanics, electricians and production support team in the assembly, test and shipment of high quality, low volume, large electro mechanical fabricated structures with complex controls for the Marine Propulsion and Power Generation SBU. This position will also interface with Sr. Operations Leadership, a variety of engineering disciplines, and end customers for the products their team produces and delivers. Additional responsibilities include ensuring all members of the team are adequately trained to accomplish assigned tasked efficiently and effectively and will lead the implementation of Lean Principles and Continuous improvement efforts in their assigned areas.
Position located in Sunnyvale, CA.
Qualifications
Basic Qualifications: Bachelor’s degree from an accredited college or university desired. May be waived upon demonstrated skill and knowledge. Significant supervisory experience in manufacturing field required.
Preferred Qualifications:
US Naval experience in the operation or maintenance of Marine Machinery strongly desired.
Experience in Lean Manufacturing tools and techniques is strongly preferred and six-sigma is a plus.
Gary Munson
Team C
Dec 10, 2018
Full time
Description
Northrop Grumman Marines Systems specializes in the development; manufacture assembly and testing of missile launching and handling systems and propulsion, and power generation systems for naval surface ships and submarines. This position will supervise the factory hourly assembly mechanics, electricians and production support team in the assembly, test and shipment of high quality, low volume, large electro mechanical fabricated structures with complex controls for the Marine Propulsion and Power Generation SBU. This position will also interface with Sr. Operations Leadership, a variety of engineering disciplines, and end customers for the products their team produces and delivers. Additional responsibilities include ensuring all members of the team are adequately trained to accomplish assigned tasked efficiently and effectively and will lead the implementation of Lean Principles and Continuous improvement efforts in their assigned areas.
Position located in Sunnyvale, CA.
Qualifications
Basic Qualifications: Bachelor’s degree from an accredited college or university desired. May be waived upon demonstrated skill and knowledge. Significant supervisory experience in manufacturing field required.
Preferred Qualifications:
US Naval experience in the operation or maintenance of Marine Machinery strongly desired.
Experience in Lean Manufacturing tools and techniques is strongly preferred and six-sigma is a plus.
Gary Munson
Team C
Description
At Northrop Grumman we develop cutting-edge technology that preserves freedom and advances human discovery. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation’s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We continue to innovate with developments from launching the first commercial flight to space, to discovering the early beginnings of the universe. Our employees are not only part of history, they’re making history.
Northrop Grumman Aerospace Systems (NGAS) is looking for a Manager Production Planning Scheduling 2 for the F-35 program located in the Palmdale, CA facility.
The Production Planning Scheduling Manager 2 will be responsible to drive world class performance across the F35 shop floor integration organization.
Plans, prepares, issues and controls production schedules and coordinates with material requirements to ensure a controlled flow of approved materials timed to meet production requirements.
Advises management of the status of work in progress, material availability, and potential production problems to ensure that personnel, equipment, materials and services are provided as needed.
Schedules equipment and personnel, confirms material supply and demands, prepares work orders or purchase requests for the production or purchase of components or parts based on a master production schedule, shop load and inventory requirements.
Coordinates interdepartmental activity with quality assurance, manufacturing, purchasing, engineering, inventory control, traffic, etc.; schedules and expedites the movement of parts by means of move orders, stock transfers and requests for shipping orders.
Don't miss this great opportunity to join a dynamic and highly successful team who provides world class value and support to our customers.
To learn more about our hiring process for manager positions, please view our Selecting the Best Qualified Managers video: www.northropgrumman.com/SQMVideo
Qualifications
Basic Qualifications:
Bachelor's degree
5 years of manufacturing, production control, materials, procurement and/or quality experience (3+ years with a Masters degree).
Experience working in a fast paced manufacturing environment and in depth knowledge of global supply chain goods movement processes
Highly Proficient in Microsoft Office Suite and Vizio
Ability to obtain and maintain a DoD Secret Clearance. U.S. Citizenship is required. Preferred Qualifications:
Strong communication skills
Orientated for teamwork and objective results
Proactive attitude and ability to work under pressured environment
Dynamic, high energy, strategic thinking, charismatic and personable leader with proven track record of high performance in a fast paced manufacturing environment
SAP Knowledge and lean six sigma certified
Gary Munson
Team C
Dec 10, 2018
Full time
Description
At Northrop Grumman we develop cutting-edge technology that preserves freedom and advances human discovery. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation’s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We continue to innovate with developments from launching the first commercial flight to space, to discovering the early beginnings of the universe. Our employees are not only part of history, they’re making history.
Northrop Grumman Aerospace Systems (NGAS) is looking for a Manager Production Planning Scheduling 2 for the F-35 program located in the Palmdale, CA facility.
The Production Planning Scheduling Manager 2 will be responsible to drive world class performance across the F35 shop floor integration organization.
Plans, prepares, issues and controls production schedules and coordinates with material requirements to ensure a controlled flow of approved materials timed to meet production requirements.
Advises management of the status of work in progress, material availability, and potential production problems to ensure that personnel, equipment, materials and services are provided as needed.
Schedules equipment and personnel, confirms material supply and demands, prepares work orders or purchase requests for the production or purchase of components or parts based on a master production schedule, shop load and inventory requirements.
Coordinates interdepartmental activity with quality assurance, manufacturing, purchasing, engineering, inventory control, traffic, etc.; schedules and expedites the movement of parts by means of move orders, stock transfers and requests for shipping orders.
Don't miss this great opportunity to join a dynamic and highly successful team who provides world class value and support to our customers.
To learn more about our hiring process for manager positions, please view our Selecting the Best Qualified Managers video: www.northropgrumman.com/SQMVideo
Qualifications
Basic Qualifications:
Bachelor's degree
5 years of manufacturing, production control, materials, procurement and/or quality experience (3+ years with a Masters degree).
Experience working in a fast paced manufacturing environment and in depth knowledge of global supply chain goods movement processes
Highly Proficient in Microsoft Office Suite and Vizio
Ability to obtain and maintain a DoD Secret Clearance. U.S. Citizenship is required. Preferred Qualifications:
Strong communication skills
Orientated for teamwork and objective results
Proactive attitude and ability to work under pressured environment
Dynamic, high energy, strategic thinking, charismatic and personable leader with proven track record of high performance in a fast paced manufacturing environment
SAP Knowledge and lean six sigma certified
Gary Munson
Team C
Description
Northrop Grumman Mission Systems sector is seeking a Manager, Manufacturing to join our team of qualified, diverse individuals. This position will be located at the Spectrum Facility in San Diego, CA. Join the men and women of the Northrop Grumman Mission Systems in meeting the largest, most complex systems challenges imaginable for government, military and business. Avionics and Tactical Networks (ATN) is an operating unit within the Mission Systems division of Northrop Grumman Information Systems. ATN is located in the Rancho Carmel facility in San Diego, California. The business has developed and advanced software-defined radio technology for sophisticated communications in a network-centric environment. A&TN focuses on providing advanced technologies, engineering development and production for our software-defined radio programs. A&TN programs include the communications, navigation and identification (CNI) production for F-22 and F-35 aircraft and production of advanced multi-function RF products such as JCREW.
Roles and Responsibilities:
Responsible for the direct supervision/management of the staff.
Directing and providing objective-oriented guidance to subordinates utilizing management guidelines & general policies.
ERCOMMS
Qualifications
Basic Qualifications: To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:
6 years experience working in a manufacturing environment
Must have electronics test and troubleshooting experience.
First Line Manager experience managing assemblers and test technicians
Prior experience with Line Scheduling
Prior experience with Environmental Health and Safety (EHS)
U.S. Citizenship
Must be able to obtain a Secret Clearance with Special Access Permission.
Preferred Qualifications: Candidates with these desired skills will be given preferential consideration:
Experience working in a DoD manufacturing environment
Experience in electronics manufacturing environment
Prior experience with Lean Manufacturing
Prior experience utilizing Kaizen Techniques
Experience with Monthly Preventative Maintenance on Production and Environmental Test equipment. To Include but not limited to, Stencil Cleaner, Vibration systems, Temp Chambers, Pad Cooling Systems and Fume Extractors
Experience with SAP and shop floor control systems
Experience with calibration of test equipment
Understanding development of overhead budgets for supplies and expenditures
Proficient in ESD Training and Certifications
Proficient in electronics equipment programming and maintenance
Ability to track PO Funding and Period of Performance for all Production equipment requiring repair and update as required
Ability to ensure that all chemical supplies requiring shelf life are current and not expired
Experience with purchasing supplies, chemicals, spare parts and tools for production labs
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO . U.S. Citizenship is required for most positions
Gary Munson
Team C
Dec 10, 2018
Full time
Description
Northrop Grumman Mission Systems sector is seeking a Manager, Manufacturing to join our team of qualified, diverse individuals. This position will be located at the Spectrum Facility in San Diego, CA. Join the men and women of the Northrop Grumman Mission Systems in meeting the largest, most complex systems challenges imaginable for government, military and business. Avionics and Tactical Networks (ATN) is an operating unit within the Mission Systems division of Northrop Grumman Information Systems. ATN is located in the Rancho Carmel facility in San Diego, California. The business has developed and advanced software-defined radio technology for sophisticated communications in a network-centric environment. A&TN focuses on providing advanced technologies, engineering development and production for our software-defined radio programs. A&TN programs include the communications, navigation and identification (CNI) production for F-22 and F-35 aircraft and production of advanced multi-function RF products such as JCREW.
Roles and Responsibilities:
Responsible for the direct supervision/management of the staff.
Directing and providing objective-oriented guidance to subordinates utilizing management guidelines & general policies.
ERCOMMS
Qualifications
Basic Qualifications: To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:
6 years experience working in a manufacturing environment
Must have electronics test and troubleshooting experience.
First Line Manager experience managing assemblers and test technicians
Prior experience with Line Scheduling
Prior experience with Environmental Health and Safety (EHS)
U.S. Citizenship
Must be able to obtain a Secret Clearance with Special Access Permission.
Preferred Qualifications: Candidates with these desired skills will be given preferential consideration:
Experience working in a DoD manufacturing environment
Experience in electronics manufacturing environment
Prior experience with Lean Manufacturing
Prior experience utilizing Kaizen Techniques
Experience with Monthly Preventative Maintenance on Production and Environmental Test equipment. To Include but not limited to, Stencil Cleaner, Vibration systems, Temp Chambers, Pad Cooling Systems and Fume Extractors
Experience with SAP and shop floor control systems
Experience with calibration of test equipment
Understanding development of overhead budgets for supplies and expenditures
Proficient in ESD Training and Certifications
Proficient in electronics equipment programming and maintenance
Ability to track PO Funding and Period of Performance for all Production equipment requiring repair and update as required
Ability to ensure that all chemical supplies requiring shelf life are current and not expired
Experience with purchasing supplies, chemicals, spare parts and tools for production labs
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO . U.S. Citizenship is required for most positions
Gary Munson
Team C
Northrop Grumman San Diego
San Diego, CA, United States
US Citizenship Required for this Position: Yes
Relocation Assistance: Relocation assistance may be available
Clearance Type: None
Shift
: 1st Shift
Travel
: Yes, 10 % of the Time
Description
The Northrop Grumman Mission Systems (NGMS) Sector Supply Chain Team is offering an exciting career opportunity to support a wide variety of major defense programs operating within the Airborne C4ISR Systems Division based in San Diego, California. NGMS is seeking a Supply Chain Planning Analyst (SCPA) to join its team of qualified and diverse Supply Chain professionals supporting the acquisition of a wide range of Electronic, machining and services commodities.
Reporting to the Global Supply Chain Program Manager for the Resilient Network Solutions (RNS) Operating Unit programs, the Supply Chain Planning Analyst (SCPA) will provide support that will help to ensure the supply chain management requirements identified during a proposal or program execution phase of a program are being addressed. In this role, the SCPA will work with the Proposal and Program Teams to evaluate material and equipment requirements throughout the life of a program. The desired candidate must understand the various aspects of supply chain management – materials management, procurement, subcontracts and supplier quality – in order to support engineering, production, logistics and the program management teams in the performance of their roles and responsibilities. In conjunction with business development efforts, the SCPA will work with the Supply Chain management Team as well as the Business Development and Program Teams to define bid and proposal requirements, schedules and budgets, and draft supply chain management strategies related to materials, procurement and subcontracts management. The SCPA will work with the Subcontract Administrators to track performance against B&P schedule of activities, support the source evaluation and selection process of suppliers during the pricing of all material and subcontract requirements, prepare proposal pricing inputs and support the team in the development of supplier capabilities and risk profiles, presentations and various reports. During the execution of a program, a SCPA would be responsible for working with members of the supply chain management team to monitor and provide status of material, procurement and subcontract activities as well as report on the cost, schedule and quality performance of the supply chain requirements for the program. The SCPA may be responsible for the oversight of supply chain activities being performed on multiple programs.
Qualifications
Basic Qualifications:
Bachelors' degree and minimum 6 years progressive supply chain experience and/or business management or Masters’ with minimum 4 years experience.
Demonstrated working knowledge of global supply chain/operations/logistics MRP/ERP systems/tools.
Experience with cost account management, supplier financial reporting/forecasting and supplier/program/product scheduling.
Proficiency in MS Office suite.
U.S. Citizenship and ability to obtain government security clearance.
Preferred Qualifications:
Masters' degree in Supply Chain, Business or Operations
Proficient in using SAP for material and finance data analysis.
Dec 10, 2018
Full time
US Citizenship Required for this Position: Yes
Relocation Assistance: Relocation assistance may be available
Clearance Type: None
Shift
: 1st Shift
Travel
: Yes, 10 % of the Time
Description
The Northrop Grumman Mission Systems (NGMS) Sector Supply Chain Team is offering an exciting career opportunity to support a wide variety of major defense programs operating within the Airborne C4ISR Systems Division based in San Diego, California. NGMS is seeking a Supply Chain Planning Analyst (SCPA) to join its team of qualified and diverse Supply Chain professionals supporting the acquisition of a wide range of Electronic, machining and services commodities.
Reporting to the Global Supply Chain Program Manager for the Resilient Network Solutions (RNS) Operating Unit programs, the Supply Chain Planning Analyst (SCPA) will provide support that will help to ensure the supply chain management requirements identified during a proposal or program execution phase of a program are being addressed. In this role, the SCPA will work with the Proposal and Program Teams to evaluate material and equipment requirements throughout the life of a program. The desired candidate must understand the various aspects of supply chain management – materials management, procurement, subcontracts and supplier quality – in order to support engineering, production, logistics and the program management teams in the performance of their roles and responsibilities. In conjunction with business development efforts, the SCPA will work with the Supply Chain management Team as well as the Business Development and Program Teams to define bid and proposal requirements, schedules and budgets, and draft supply chain management strategies related to materials, procurement and subcontracts management. The SCPA will work with the Subcontract Administrators to track performance against B&P schedule of activities, support the source evaluation and selection process of suppliers during the pricing of all material and subcontract requirements, prepare proposal pricing inputs and support the team in the development of supplier capabilities and risk profiles, presentations and various reports. During the execution of a program, a SCPA would be responsible for working with members of the supply chain management team to monitor and provide status of material, procurement and subcontract activities as well as report on the cost, schedule and quality performance of the supply chain requirements for the program. The SCPA may be responsible for the oversight of supply chain activities being performed on multiple programs.
Qualifications
Basic Qualifications:
Bachelors' degree and minimum 6 years progressive supply chain experience and/or business management or Masters’ with minimum 4 years experience.
Demonstrated working knowledge of global supply chain/operations/logistics MRP/ERP systems/tools.
Experience with cost account management, supplier financial reporting/forecasting and supplier/program/product scheduling.
Proficiency in MS Office suite.
U.S. Citizenship and ability to obtain government security clearance.
Preferred Qualifications:
Masters' degree in Supply Chain, Business or Operations
Proficient in using SAP for material and finance data analysis.
