2 jobs found

THIS IS A T32 EXCEPTED SERVICE, PERMANENT  POSITION The primary purpose of the SHEET METAL MECHANIC (AIRCRAFT), WG-3806-10, is to accomplish the inspection, repair, modification, installation and troubleshooting of sheet metal, fiberglass, bonded honeycomb and other structural materials and components as well as treatment (i.e., mechanical and chemical), and painting of missiles, aircraft powered and nonpowered Aerospace Ground Equipment (AGE), and monitoring aircraft and equipment washing. Conditions of Employment CALIFORNIA NATIONAL GUARD MEMBERSHIP IS REQUIRED:  This is an excepted service position that requires membership in a compatible military assignment in the California National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Compatible military grade and assignment is required.  If you are interested in joining the California National Guard, please contact a California National Guard recruiter prior to applying for this position. https://state.nationalguard.com/california Compatible Military Assignments:  DAFSC: 2A7XX Non-DAFSC applicants are encouraged to apply for the positions if experience is held. A two year compatibility waiver MAY be obtained. Priority Areas(s) of Consideration: Priority consideration is first given to the areas below. AREA I=  Current California National Guard employees who are serving on a Permanent/Indefinite/Temporary appointment. AREA II=  Current California National Guard members. AREA III=  Current military members of the Air Force/Army National Guard, Air Force/Army Reserve or Air Force/Army Active Duty. (Applicants who are currently in other Air/Army branches and NOT currently a member of the California National Guard (CNG) must become a member of a compatible unit of assignment within the Air Force CNG commensurate with the military grade listed in this announcement prior to federal assignment). Military Grades:  E-3 thorough E-6 Recruitment/Relocation Recruitment/Relocation Incentive MAY BE authorized, subject to funding and approval. PCS Relocation Costs MAY BE authorized subject to provisions of the Joint Travel Regulation, funding, and an agency determination that a Permanent Change of Station (PCS) move is in the Government's best interest. Must maintain appropriate level of security clearance. Must wear appropriate military uniform including required grooming standards. Must maintain a compatible military unit, grade and job assignment as required by current directives. Participation in direct deposit is mandatory. Security Clearance: at a minimum a National Agency Check is required. Qualifications General Experience:  Experience that has provided the ability to remove, repair, modify, and install parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, faring, access doors, panels and other related items. SHEET METAL MECHANIC (AIRCRAFT), WG-3806-10:  Must have at least 18 months experience in layout, bending, cutting, forming and assembling to manufacture items of aircraft and equipment; Experience using more complicated shop tools and equipment; Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys; Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments. Your qualifications will be evaluated on the following competencies: Ability To Use and Maintain Tools and Equipment Attention to Detail Metal Processing and Metalworking Trouble Shooting

THIS IS A T32 EXCEPTED SERVICE, PERMANENT  POSITION The primary purpose of the AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC, WG-8268-11, is to serve as shop chief over a small organizational segment in a maintenance function with responsibility for the overall shop operation. One or more employees who perform work in the Aircraft Pneudraulic Systems Mechanic, WG-8268-10, occupation are assigned to the shop. Conditions of Employment CALIFORNIA NATIONAL GUARD MEMBERSHIP IS REQUIRED:  This is an excepted service position that requires membership in a compatible military assignment in the California National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Compatible military grade and assignment is required.  If you are interested in joining the California National Guard, please contact a California National Guard recruiter prior to applying for this position. https://state.nationalguard.com/california Compatible Military Assignments:  DAFSC: 2A8X1, 2A5X1, 2A5X4, 2A6XX, 2A8X1; 2A8X1C, 2A8X1E, 2A8X2C, 2A8X2E Non-DAFSC applicants are encouraged to apply for the positions if experience is held. A two year compatibility waiver MAY be obtained. Priority Areas(s) of Consideration: Priority consideration is first given to the areas below. AREA I=  Current California National Guard employees who are serving on a Permanent/Indefinite/Temporary appointment. AREA II=  Current California National Guard members. AREA III=  Current military members of the Air Force/Army National Guard, Air Force/Army Reserve or Air Force/Army Active Duty. (Applicants who are currently in other Air/Army branches and NOT currently a member of the California National Guard (CNG) must become a member of a compatible unit of assignment within the Air Force CNG commensurate with the military grade listed in this announcement prior to federal assignment). Military Grades:  E-6 through E-7 Recruitment/Relocation Recruitment/Relocation Incentive MAY BE authorized, subject to funding and approval. PCS Relocation Costs MAY BE authorized subject to provisions of the Joint Travel Regulation, funding, and an agency determination that a Permanent Change of Station (PCS) move is in the Government's best interest. Must maintain appropriate level of security clearance. Must wear appropriate military uniform including required grooming standards. Must maintain a compatible military unit, grade and job assignment as required by current directives. Participation in direct deposit is mandatory. Qualifications General Experience:  Experience or training which demonstrates knowledge of basic electrical and mechanical principles; knowledge of troubleshooting procedures used to isolate malfunctions in aircraft pneudraulic systems; and ability to use technical manuals, equipment specifications, and test calibration procedures in performing the work. AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC, WG-8268-11:  Must have at least 18 months experience which provided a knowledge of basic electrical and mechanical principles; Experience in troubleshooting/repair of aircraft fuel systems, internal fuel tanks, fuel bladders, and pumps; Experience in inspection, removal, installation, adjustment and operational checks on various fuel system components such as fuel lines, valves, pumps and switches; Experience in safety, fire, security and housekeeping requirements as they apply to aircraft fuel systems repair; Experience in servicing, maintaining, disassembling/assembling, repairing and testing pneudraulic systems; Experience in diagnosing malfunctions and overhauling pneudraulic accessories by disassembling, cleaning and examining parts; Experience in repairing, rebuilding and overhauling pneudraulic systems; Experience in mechanical repairs using hand tools and test equipment; Experience that demonstrates the ability to interpret technical manuals, specifications and publications. Your qualifications will be evaluated on the following competencies: Attention to Detail Decision Making Information Management Preventive Maintenance