Quality Control Inspector/Technician (Woodland)

  • Clark Pacific
  • Woodland, CA, USA
  • Aug 10, 2018
Full time QA-Quality Control

Job Description


Performs any combination of the following tasks in and about the production environment. 

Specific duties/responsibilities/functions

  • Application of Safety principles and processes.

  • Ability to read production drawings or blueprints and tape measure

  • Visual inspection of all exterior surface components; including finishes and textures.

  • Inspection of panel dimensions inserts and embeds.

  • Timely and accurately record Inspection data, including non-standard issues utilizing designated electronic tools and programs; including BIM 360 and Piece tracker

  • Communication (verbal and electronic) to Engineering and Production teams of inspection and defect results

  • Tracking progress of non-standard issue resolutions and re-inspect at various stages.

  • Complete final inspection of panels prior to plant departure

  • Communication to engineering and production teams of inspection and testing results.

  • Track progress of issue/defect resolutions and re-inspect at various stages.

  • Inspect assembly fabrication and placement of designated reinforcement materials, i.e. length, width, and size.

  • Perform standardized concrete test including but not limited to; cylinder breaks, grout breaks, concrete sampling, concrete temperature, concrete until weight, concrete density, fine/coarse aggregate sieve analysis, cement set test, fine/coarse aggregate moisture analysis, T-20 test, rebound hammer test, Windsor probe test, concrete air content, concrete slump test, j-ring test, color card verifications.

  • Maintain, monitor and report data from the sure cure system

  • Perform insert and miscellaneous metals inspection and standardized testing

  • Adhere to appropriate testing techniques and environment to ensure ACI, PCI and IAS compliance

  • Communicate with management schedule, manpower and equipment needs

    Kind and length of experience:

  • 0 -2 years in concrete, construction, manufacturing, inspection or other related fields

  • Ability to use technology, driven by Inspection Data program needs. Must have basic operation use of computers, I-pads, and data input functions.

    Specialized Knowledge (preferred) 

  • ACI Certification, Grade 1

  • ACI Aggregate Testing Tech, Grade 1

  • ACI Strength Testing Tech, Grade 1

  • ACI laboratory Testing, Level 1 or 2

    Minimum Knowledge/education/certification/license requirements:

  • Must be 18 years or older

    Physical Requirements (i.e., extended periods of sitting, bending, stooping, standing, walking or driving; frequency of lifting or carrying heavy objects - note required weight; required communication skills - verbal/auditory):

  • Ability to sit, stand, walk, stoop, kneel, crouch and crawl throughout shift and/or long periods of time

  • Ability to climb up to 15 feet, and maintain balance.

  • Manual dexterity, eye-hand coordination and ability to meet physical requirements.

  • Must be able to frequently lift up to 50lbs

  • Vision abilities including close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

  • Ability to utilize hearing protection and maintain required communication.

  • Must be able to read and speak basic English

    Environmental Factors (e.g., ability to work in extreme heat/cold, ability to work at heights over 15 feet, ability to work 3rd shift, travel, ability to work weekends/on-call).

  • Able to work safely on/around moving mechanical parts

  • Exposure to outside weather conditions, extreme cold and extreme heat, wet and/or humid condition, fumes airborne particles and vibration.

  • Noise level is usually moderate to loud

  • Shift times and overtime may vary depending on work levels and processes.



Team A

Bruce Riley


Listed in Job Description